Mark's 2015 Pro Build

Suspension/Wheels:
2.5 ADS Front Coilover w/clickers
2.5 ADS Rear Triple Bypass shocks
MCM Upper Control Arms
Wheelers Front Superbumps
Total Chaos Spindle Gussets
Front Sway Removed
Icon RXT Multi-Rate Leaf Pack - Option 3
Coachbuilder Carrier bearing drop
FN BFD 18x9 +12 Wheels
BFgoodrich KO2 35x12.50R18
Full FN spare on General Grabber 35x12.50R18 under bed - OEM location

Exterior/Interior/Lighting/Armor:
RCI Engine Skid
RCI Transmission/Transfer Skid
RCI Gas Tank Skid
SDHQ ABS guards
All-Pro DOM Upgraded Sliders
BAMF Full size bed rack- Milogen Fab welded tabs for LED pods/dual band antenna
Total Chaos Bed Channel Stiffeners
Pop and Lock Tailgate system
SwitchPros 8100
Rago Fab Ditch Brackets
OME Brake Line/ABS extender brackets
Baja Designs Squadron Sport Ditch lights - Wide spread amber lenses
Mini D2S 3.0 Retrofit
Morimoto 4500k 50w HID Kit
Sylvania LED cargo lights
eBay 48 panel interior LEDs
Hypertech Speedo-Calibrator
Smittybilt rear shackle hitch receiver
FRAC - Anytime front/rear camera/gps kill
Mob Armor Mag mount phone holder
BTech Mini 25w Dual Band Radio
Tram Dual Band Antenna

$90 Midland 75-822 40 Channel CB-Way Radio

Midland 75-822 Handheld radio
Wilson Mag mount whip antenna
Nagoya Dual Band Mag mount antenna (backup)
Center Console Organizer
Driver side Oshit handle
AVS Low Profile window Visors
Weathertech floor mats
Underseat fire extinguisher mount
UndercoverFlex Trifold tonneau cover
OEM Tundra Bed mat
42" Auxtings LED bar
RokBlokz rear mudlflaps
Nilight Bed rack/Chase Lights
Relentless Cab mount chop plates
Front bumper spacer mod
Rear Differential Breather mod
Front Tint match

Engine:
TRD OEM radiator cap
TRD OEM Air filter
TRD OEM Exhaust (Tail Pipes removed)
Custom Secondary Air Intake Pump Relocation

Gear:
Krazy Beaver Shovel
1 4g Rotopax Gas Tank
1 2g Rototpax Gas Tank
1 3g Rotopax Gas Tank
1 2g Rotopax Water Tank
Fiskars Chopping Axe
WaterPort Day Tank
TredPro Recovery Boards
Smittybilt Snatch strap
Trasharoo spare trash bag
Tepui Autana 3P Ruggedized tent w/annex

To Do List:
ARB Single compressor with single mount (waiting for compressor to come in)
Ubolt flip kit with wheelers super bump (needs new ubolt or more grinding/shaving)
Rewire my bed rack lights with a quick disconnect/Rewire+configure switchpro mount and wiring with blue sea terminal block/bus bar add custom fuse box plate
Rebuild Baja Design Squadron Sport from work/scene light to spot/driving lights, and put those in my fogs with the BD foglight kit.
Rebuild UCA's
Rebuild spare LCA w/ ball joints, and maybe some Poly bushings
Build spare Spindles with gussets and new wheel bearings/hubs/axle seal

Future Mods:
37" tires
17" wheels with lower offset
Gears/Rear locker
High clearance hybrid Front bumper w/12k winch
High clearance rear tube bumper


Quick Links:
DIY: Diff Breather mod
DIY: Rear hub grease cap
6 state run trip
Bodie/Kavanaugh/Copper Mtn trip
Hollister hills trip
NorCal Tundras Meet
Pismo Dunes Trip
Alabama Hills/Bishop Trip
Hollister Hills trip & Alamo Mtn. Trip
Mojave trip
Ho Ho Hollister Run
Death Valley Trip
Death Valley trip video

 

Good build you got going on... Can't wait to see it in person and I'm super jealous of the rims... I want those rims but in a different color

 

@Sean266 Thanks bud!
@2011_Limited_tundra Hey give dustin a holler at FN wheels. they got some cool colors. If you need powder coating done I have a buddy that can do some really cool colors.
I wanted to do these in Magnesium blue, but wifey didn't approve she wanted gloss black. So we left it as is lol.

 

I definitely will... They have the color that I want I just can't remember what it's called... I saw them on another thread on here and it was with my color truck and the combo went together really well

 

I think that would be the gunmetal..
I seen one in person on a Tacoma and it looks really nice!

I was gonna pull the trigger on these.. I thought they looked really nice for the price.
Level 8 mk6 18x9 +12 for our tundras.

 

Yea that is the color that I want to get... Hopefully I can get them in the next couple of months

 

Looks damn good. Keep it up.

 

@csuviper haha
this and the taco is a toughy.. Really want to LT both trucks. but wallet saying no.. and wifey definitely saying no.
As much as I want on the Tundra, I don't think i got the webos to cut it up.. at least not yet.
We'll see. Getting it ready for a trip this September from San Jose,CA to Sedona,AZ to Moab,UT then the hoorah @ Vegas.
Been thinking about a cover. But the one I want is almost 3k. lol.. Quality part though.

 

legit ! really nice.
what LED bar is it ?

 

I got the opportunity from HIDExtra.com. It was a 32" flood/spot combo with harness.
Its almost been a year, and its holding up really well.. Got a little bit of condensation, but over Light output is still good..
I'll probably upgrade to there newer version in the near future. And maybe upgrade the size. I'll post my DIY I made for them on here in a bit. I should still have the files.

 

@TheBeast
here ya go.. luckily i had it saved on my work pc
https://www.tundras.com/threads/diy-32-led-bar-install.5042/

 

truck looks great man!!

 

Did my CB carrier bearing drop during my break. Drove home around town less vibes from the driveshaft for sure.
Also put on my buddies rear lift and T4R Pro wheels

 

I like to stretch out before I go shopping at the mall

 

Real nice

 

This is one of my favorite builds yet! Love every mod you did.
Well done.

 

Damn this a sexy build. FN BFD's are my favorite wheel on our trucks, looking to get those same ones somewhere down the road when the wallet cooperates lol.

Diggin the Taco and the sticker in the rear window as well

 

Nice to see another white pro! Love the retros too, after my Tacoma I really considered doing the all chrome bowl and shroud OEM look. You made things super difficult for me now haha

 

Good looking truck.

 

muahaha!Hey Stefen, the one you had on Rinzler were pretty bad ass..
If I went back and did mine I would've done the FXR or the LS460 projector.
But if you did black out the bowls I would do like Rinzler's, maybe a matte housing?

But check this out if you wanted to play around w/ that sidemarker reflector, smoke/smoke/amber/clear.
http://klearz.com/products/toyota/tundra/2014_tundra_clear_headlight_markers

OEM look is really nice.. and im suprised how factory looking it came out. If you did the LS460 it would look super factory with the factory shroud it comes with!
Can't wait to see what you got in mind.

 

Just picked this up used yesterday.
Installed it on my break with new weatherstripping.
Undercover flex cover.
Gonna touch it up when I get the chance but hey it works!

 

hey @dcsleeper408, what do you mean by touching the cover up??? I have the exact same model and was wondering what are going to do to it!!! Thanls bud, and BTW, awesome looking rig you got there!!!

 

Thank you Omar.

First the cover I got was used.. It shows some age..
There are a few paint chips on the folds I will definitely respray or just touch up paint.
As for the rest of the cover. It does look a little faded.
So I cleaned it with Chemical Guys Green Clean Diluted 15:1 (15oz distilled water/1oz green clean), and it brought some life back to it..
Next I will use some McGuire's plastic polish and buff the whole cover out.(hopefully bring that shine back)
Then apply sealant.

I probably won't touch up the paint or Plastic Polish(fine finish w/ jeweling type pad) it until my next heavy detail on the tundra.. Maybe late fall before winter comes.

Sealant I will apply in an hour. on my next break.

Whatever you do plan to do or use on the cover make sure that it is Plastic safe.
http://www.undercoverinfo.com/warranty-information#flex

AND ALWAYS EXPERIMENT ON A SMALL AREA BEFORE ATTEMPTING A LARGE PART OF THE COVER.

 

@omaguz

Camera doesn't do much justice, but with just the sealant I used, it really brought it back. And not as much shine as I would want but it definitely is a lot more black than a faded black.. Not brand new but a lot better than it was when I first installed it.
Pretty happy with the results. Heading out to a hobby store to find some flat black touch up paint markers I can use.

 

Hey buddy, thanks for the prompt reply. I will have to copy your detailing process, love to clean my rig with some cold ones!!! Keep up the good work Mark I'll keep an eye out for an awesome build!!!

 

BTW how are you liking the KO2's???

 

@omaguz
Love em, On both my taco and tundra!
Going to test em in the sand hopefully at the end of the month. Lookin for a portable air compressor right now so I can air down and see how they do!!
And then maybe do some camping sometime next month.