Post Lift Torque Specs needed

Hello Folks

In preparation for a lengthy road trip to the Baja we've done a small lift to our 06 DC. We used 5100's and added a leaf to the rear to support extra weight. We want to leave this weekend but the lift needs re-torquing as requested by the shop and they are not open weekends (poor planning on my part).

I have a torque wrench and thought I could do it myself. I've done some searching in this forum but could not find torque settings. Looks like there are a number of folks that do this kind of work themselves. Anyone know the settings? Do I need to unweight the suspension to torque?

Thanks in Advance. I'll drink a cerveza in your honour.

Rob

 

Just the rear was done? Check the ubolts, shock bolts and the bolts at the leaf ends/shackles


Look up and see if the haynes manual has been posted, i think there is a sticky on one of the tundra forums

 

Front as well. Will poke around and see if I can find the manual. Haven't been able to find a hard copy locally. Thanks for the pointer. R

 

http://web.archive.org/web/20110102225436/http://www.ncttora.com/FSM/

Maybe one of these will download

 

The online version seems to be removed but have done some sleuthing at your suggestion and found this

https://drive.google.com/file/d/0B-5MhfqaHsHObmt6RDVhOGtKWjA/view

Thanks again for the kick in the ass to the right direction.

R

 

https://www.tundras.com/threads/suspension-torques.4740/

 

Amazing. Thanks. Will do my best to get better at searching (and find out more about stickies). R