1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DIRTY SEVEN CLUB

Discussion in '3rd Gen Tundras (2014-2021)' started by matictundra, Feb 18, 2019.

  1. Apr 6, 2021 at 6:40 PM
    #1531
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    128
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM Limited
    7" BDS ICON 2.5 remote res w/ cdc 37" Micky T Baja AT3s Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    I ran 37s for a while with 4.3s and it drove OK, but I did see a big improvement with 4.88s.
    My 2 cents and I'm sure you have heard this many times: if you are thinking you might add a a locker in the future, suck it up and do it when re-gearing (I had the ARB lockers installed with the re-gear) a lot of $$$ but save a lot in labor if do them together.
     
    Mountun Goat, Classy63 and Hightide like this.
  2. Apr 6, 2021 at 6:45 PM
    #1532
    Hightide

    Hightide Kinda’ new, but old

    Joined:
    Aug 14, 2020
    Member:
    #50791
    Messages:
    1,423
    Gender:
    Male
    First Name:
    Chad
    AlahhBama!
    Vehicle:
    2016 Limited
    Lots of do-dads.
    Buy once cry once.
     
    Trabs00 likes this.
  3. Apr 6, 2021 at 7:26 PM
    #1533
    Classy63

    Classy63 Valhalla’s Shield guy Vendor

    Joined:
    Mar 1, 2021
    Member:
    #59825
    Messages:
    278
    Gender:
    Male
    First Name:
    Tyler
    Cypress Texas
    Vehicle:
    15 platinum Barcelona red
    Toytec Aluma 2.0 front and rear, Toytec shackles, Toytec add a leaf pack, Tuff Country UCA’s, Firestone bags with daystar cups. JBA long tubes, w/3” cats, Dirty Deeds TRD replacement, DAP tune, AFE filter
    Ya, if I decide to go 37’s I will regear and of course lube up, and get a LSD
     
    Trabs00 likes this.
  4. Apr 8, 2021 at 12:37 PM
    #1534
    The Juice

    The Juice THE JUICE IS LOOSE !!

    Joined:
    May 4, 2016
    Member:
    #3299
    Messages:
    330
    Gender:
    Male
    COLORADO NATIVE
    Vehicle:
    2013 TUNDRA W/ ROCKET BOOSTERS
    FLUX CAPACITOR/ HOVERCRAFT CONVERSION
    P.S. How much lift do you have in the back to get that much rake?!!! Or how many inches higher is the back than the front? Thanks again!
     
  5. Apr 8, 2021 at 1:59 PM
    #1535
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    128
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM Limited
    7" BDS ICON 2.5 remote res w/ cdc 37" Micky T Baja AT3s Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    Actually for those that love the rake, that pic is a bit impacted by my driveway slope to the right and front.

    My truck is actually only 1" higher in the back at the moment. But actually today my new Alcan leafs are being put on which should give me ~2" rake unloaded.

    I'll post up some pics with the Alcans and front coilovers adjusted

    20210403_081026.jpg
     
  6. Apr 8, 2021 at 2:18 PM
    #1536
    The Juice

    The Juice THE JUICE IS LOOSE !!

    Joined:
    May 4, 2016
    Member:
    #3299
    Messages:
    330
    Gender:
    Male
    COLORADO NATIVE
    Vehicle:
    2013 TUNDRA W/ ROCKET BOOSTERS
    FLUX CAPACITOR/ HOVERCRAFT CONVERSION
    Hell yes!! Thanks man!! LOVE that truck..... LOVE that it is a second Gen as well. I can't stand the front ends on the 3rd gens.
     
    Trabs00 likes this.
  7. Apr 8, 2021 at 7:03 PM
    #1537
    Hightide

    Hightide Kinda’ new, but old

    Joined:
    Aug 14, 2020
    Member:
    #50791
    Messages:
    1,423
    Gender:
    Male
    First Name:
    Chad
    AlahhBama!
    Vehicle:
    2016 Limited
    Lots of do-dads.

    I always enjoy seeing pics of your truck.
     
    Trabs00 likes this.
  8. Apr 9, 2021 at 10:15 AM
    #1538
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    128
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM Limited
    7" BDS ICON 2.5 remote res w/ cdc 37" Micky T Baja AT3s Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    Not sure if this is poor etiquette for this forum, and if so I apoplogize to the Mods. I thought some of you in the 37 club might be interested in a front CV axle upgrade opportunity.

    I am organizing a group buy on RCV Axles in another thread and just wanted to cross-post for those not directly searching for these axles.
    They are supposed to be the strongest axles on the market for Tundras. They are not cheap, but if we get 5 people 25% off, 10 people 30% off

    https://www.tundras.com/threads/rcv-axle-group-buy-2021-07.84948/

    IF you have comments, questions, want to have a discussion, please DM me or do so in the other thread so as not to high-jack this one.
     
    Last edited: Apr 9, 2021
  9. Apr 9, 2021 at 1:44 PM
    #1539
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    453
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    Friday pix update

    Box Canyon.jpg
    Side.jpg
     
  10. Apr 9, 2021 at 9:26 PM
    #1540
    Bigboitundra

    Bigboitundra New Member

    Joined:
    Jun 3, 2019
    Member:
    #31417
    Messages:
    74
    Gender:
    Male
    Vehicle:
    2018 tundra crewmax
    7 inch lift
    I want to get that front bumper... nice truck
     
  11. Apr 10, 2021 at 12:17 PM
    #1541
    Lightning_Lad

    Lightning_Lad New Member

    Joined:
    Dec 23, 2018
    Member:
    #23376
    Messages:
    237
    Gender:
    Male
    First Name:
    Tom
    Orange CA
    Vehicle:
    2017 Silver Sky Platinum Pro
    Line x Bed liner Trifold Tonneau cover TRD PRO Dual exhaust TRD PRO sway bar TRD PRO air intake TRD PRO suspension TRD PRO LED 2019 Headlight conversion TRD 2020 Wireless charging tray TRD shift knob TRD PRO Grille TRD red anodized dust caps (+25 hp per wheel) Matt black mirror caps and door handles Tesla style Headunit KTJO 4x4 tail gate pop n lock upgrade Driver side grab handle Viper Remote start Viper alarm system 18” Method NV’s 33.5” Toyo R/T ESP Long box underseat storage 3M ceramic tint
    Mornin’
    Need help deciding between the following;

    1) Icon Delta UCA’s or SPC UCA’s (adjustable)

    I’m running 37’s with the 2017 TRD PRO suspension. No rub, full turn to turn and articulates. Alignment came out 95% spot on.
    However... I want to beef up the UCA’s and not over stress the components.
    I subscribe to buy once cry once economics.

    I will also be adding the Coachbuilder TRD PRO kit within the next month or so..
     
    Mountun Goat and cctxquicksand like this.
  12. Apr 10, 2021 at 12:21 PM
    #1542
    cctxquicksand

    cctxquicksand IG - TRDistheWrd

    Joined:
    Jun 3, 2019
    Member:
    #31410
    Messages:
    721
    Gender:
    Male
    This gives me confidence in going up to 37s on a westcott lift. Do you happen to have any pictures? I’d love to see
     
  13. Apr 10, 2021 at 1:41 PM
    #1543
    blackoutt

    blackoutt YEAH BUDDY!

    Joined:
    Oct 21, 2018
    Member:
    #20805
    Messages:
    684
    Southern IN
    Vehicle:
    17 DC Adventure Build + 07 DC Truck Stuff
    The billet icon delta joint arms that are adjustable are one of the best. If you're comparing to the tubular non adjustable icon delta joint arms then I vote to go with the SPCs. High adjustability and good quality at a fair price. If my truck didn't come with billet icons I would have bought SPC.
     
    Mountun Goat likes this.
  14. Apr 10, 2021 at 2:00 PM
    #1544
    SK_Tundra

    SK_Tundra New Member

    Joined:
    Aug 19, 2018
    Member:
    #18354
    Messages:
    248
    Gender:
    Male
    Stockton Ca
    Vehicle:
    2015 Tundra Mall Rated
    Any pictures? I’m on trd pro suspension also and would like to know what had to be done to make 37s fit
     
  15. Apr 10, 2021 at 3:12 PM
    #1545
    Lightning_Lad

    Lightning_Lad New Member

    Joined:
    Dec 23, 2018
    Member:
    #23376
    Messages:
    237
    Gender:
    Male
    First Name:
    Tom
    Orange CA
    Vehicle:
    2017 Silver Sky Platinum Pro
    Line x Bed liner Trifold Tonneau cover TRD PRO Dual exhaust TRD PRO sway bar TRD PRO air intake TRD PRO suspension TRD PRO LED 2019 Headlight conversion TRD 2020 Wireless charging tray TRD shift knob TRD PRO Grille TRD red anodized dust caps (+25 hp per wheel) Matt black mirror caps and door handles Tesla style Headunit KTJO 4x4 tail gate pop n lock upgrade Driver side grab handle Viper Remote start Viper alarm system 18” Method NV’s 33.5” Toyo R/T ESP Long box underseat storage 3M ceramic tint
    I’m leaning towards the SPC’s but the Billet ICON’s seem to have fairly solid reputation. I considered camburgs (also coz they local) but they build in a lot of caster to their UCA’s and are not used on a lot of Tundras from what I’ve researched so far.
    I don’t “wheel” hard, I’m not a Bro verlander.
    I just go off-road 7 or 8 times a year to the high desert to go shooting or some fire roads and forest trails for hiking/biking. My truck is 95% driveway princess. If you’re thinking 37’s be aware there’s several ways of doing them.

    I’m at work just now so I can’t take pictures of under carriage but here’s a few.

    AEF9B50D-BF1C-43CA-AB9B-354B06E08C99.jpg
    EB470720-C9E4-4681-BE4D-54A109BE8D4A.jpg
    585F4212-9595-46A6-A4E3-6D68F15C1668.jpg
    04A82B18-2D8C-432F-BC90-CAAD76D4E4BB.jpg
    0B05C2B4-5CA4-4A4B-9566-1A002FFC0443.jpg
    4B6757CB-521C-4979-8631-FEAA381B5E39.jpg
    AB2133D4-B850-493E-A545-34AB0D8F0D07.jpg
    76848BC8-AB62-43CD-B2BA-AFD0309E4153.jpg
    D57A4EB9-C67E-4FE1-9362-37037E0C51D7.jpg
     
  16. Apr 10, 2021 at 3:15 PM
    #1546
    so_juanderful

    so_juanderful New Member

    Joined:
    Oct 21, 2017
    Member:
    #10429
    Messages:
    122
    Gender:
    Male
    Honolulu, HI
    Vehicle:
    2017 Cement Tundra TRD Pro
    Yesterday’s shenanigans
    3532ECBD-0C58-424A-9C9C-6B63999EDD8E.jpg
    F1B02DCF-3B07-468E-842B-39751A258E4D.jpg
     
  17. Apr 11, 2021 at 7:15 AM
    #1547
    5.7TRDProm

    5.7TRDProm What's bothering you?

    Joined:
    Jun 3, 2018
    Member:
    #15847
    Messages:
    547
    Gender:
    Male
    First Name:
    Dara
    Vehicle:
    2018 Cement Tundra SR5
    All stock-ish. Powdercoated blue suspension.

    Who did this Body Mount Relocate?
     
    Mountun Goat, Hightide and BlackSheep like this.
  18. Apr 11, 2021 at 5:26 PM
    #1548
    5.7TRDProm

    5.7TRDProm What's bothering you?

    Joined:
    Jun 3, 2018
    Member:
    #15847
    Messages:
    547
    Gender:
    Male
    First Name:
    Dara
    Vehicle:
    2018 Cement Tundra SR5
    All stock-ish. Powdercoated blue suspension.
    Quick shot today at a quick stop.

    53-FBA9-DE-C492-4-B18-B604-5-C0-ACE0-C8-_3c6bf5e897773e6a3c70ad1bc6cb98da3effab5e.jpg
     
  19. Apr 11, 2021 at 5:47 PM
    #1549
    Lightning_Lad

    Lightning_Lad New Member

    Joined:
    Dec 23, 2018
    Member:
    #23376
    Messages:
    237
    Gender:
    Male
    First Name:
    Tom
    Orange CA
    Vehicle:
    2017 Silver Sky Platinum Pro
    Line x Bed liner Trifold Tonneau cover TRD PRO Dual exhaust TRD PRO sway bar TRD PRO air intake TRD PRO suspension TRD PRO LED 2019 Headlight conversion TRD 2020 Wireless charging tray TRD shift knob TRD PRO Grille TRD red anodized dust caps (+25 hp per wheel) Matt black mirror caps and door handles Tesla style Headunit KTJO 4x4 tail gate pop n lock upgrade Driver side grab handle Viper Remote start Viper alarm system 18” Method NV’s 33.5” Toyo R/T ESP Long box underseat storage 3M ceramic tint
    It was a local performance shop in SoCal. I shopped around all the usual suspects; 4Wheel Parts, Outlaw Off-road, ORW, 88 Rotors, Socal Supertrucks and a few other smaller shops.
    Pretty much everyone told me “Bro, ye gotta get 4” - 6” lift minimum, coil overs, BMC, UCA’s to run 37’s.”
    I.e spend north of $6,000 to then be able to buy and run 37’s...‍♂️

    Thanks Bro.

    So I kinda wanted to try a different route and report the results to the Tundras.com forums whether I nail it or eff things up.

    The body mount chop was gonna be $350 (several other places were $400-$600 for a CHOP)
    Body mount relocation was $700 and eliminates almost all the headaches of clearance, wheel offset and the paltry 2” lift with the Bilstein TRD Pro suspension.
    I’ve spoken to Coachbuilder and will be ordering the +3 TRD PRO kit. This should give another 1” up front and 1.75” in rear. I’ll be going with SPC’s adjustable UCA’s and installing them about a month after the Coachbuilder kit. Just trying to see what improves things piece by piece.
    If anyone local is considering this and wants to drive my Tunny or check it out I’m happy to meet up.
    My 5.29 gears have almost 400 miles on them and I’ll be having the diff oil changed at 500 as recommended by the installer.
     
  20. Apr 11, 2021 at 6:04 PM
    #1550
    5.7TRDProm

    5.7TRDProm What's bothering you?

    Joined:
    Jun 3, 2018
    Member:
    #15847
    Messages:
    547
    Gender:
    Male
    First Name:
    Dara
    Vehicle:
    2018 Cement Tundra SR5
    All stock-ish. Powdercoated blue suspension.

    Sorry to keep digging in on this, but what shop in Socal? Unless it/they are exclusive then I get it if you don't want to name them out. I've been hunting and searching around to find someone or a fab shop that is knowledgeable to do this on my tundra since no one else does and most little fab shops around does it for all those tacos and 4R.
     
  21. Apr 11, 2021 at 6:24 PM
    #1551
    Lightning_Lad

    Lightning_Lad New Member

    Joined:
    Dec 23, 2018
    Member:
    #23376
    Messages:
    237
    Gender:
    Male
    First Name:
    Tom
    Orange CA
    Vehicle:
    2017 Silver Sky Platinum Pro
    Line x Bed liner Trifold Tonneau cover TRD PRO Dual exhaust TRD PRO sway bar TRD PRO air intake TRD PRO suspension TRD PRO LED 2019 Headlight conversion TRD 2020 Wireless charging tray TRD shift knob TRD PRO Grille TRD red anodized dust caps (+25 hp per wheel) Matt black mirror caps and door handles Tesla style Headunit KTJO 4x4 tail gate pop n lock upgrade Driver side grab handle Viper Remote start Viper alarm system 18” Method NV’s 33.5” Toyo R/T ESP Long box underseat storage 3M ceramic tint
    I’m being respectful to the shop, they wanted me to wait until I was completely happy and driven the truck a wee while to report any issues before dropping their details. It’s only fair given I went a very different route to 37’s...

    Gimmie a call, for a wee chat.
    happy to answer any questions.
    714-three hundred-5167

    Tom
     
    5.7TRDProm and Mountun Goat like this.
  22. Apr 16, 2021 at 10:31 AM
    #1552
    King R 808

    King R 808 New Member

    Joined:
    Dec 1, 2019
    Member:
    #39409
    Messages:
    197
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    2020 White Tundra TRD Pro
    37s here i come! everything ordered just waiting for install in a couple weeks!!!
    Fuel.jpg Baja Boss.jpg Ready lift.jpg
     
  23. Apr 19, 2021 at 8:01 AM
    #1553
    blackoutt

    blackoutt YEAH BUDDY!

    Joined:
    Oct 21, 2018
    Member:
    #20805
    Messages:
    684
    Southern IN
    Vehicle:
    17 DC Adventure Build + 07 DC Truck Stuff
    I thought my fenders were the limitation for 17x8.5 0 offset? Looks like my front bumper might be saving them. Here's what lots of caster does.

    20210417_115220.jpg

    Rear bumps tuned in nice, just grazing plastic liners at full hard stuffed. I have a little more plastic liner trimming to do on the rear of the front wheel wells. Maybe you guys are talking about the bottom corner of the fender behind the front wheel? Mine looks a little bent there? I'll just trim that off too.

    Duro bumps on one bump and stock with a spacer for 700# coils on the other front bump spot.
     
  24. Apr 25, 2021 at 2:57 PM
    #1554
    Trabs00

    Trabs00 New Member

    Joined:
    Mar 11, 2016
    Member:
    #2890
    Messages:
    128
    Gender:
    Male
    First Name:
    Travis
    Seattle, WA
    Vehicle:
    2012 Black Tundra CM Limited
    7" BDS ICON 2.5 remote res w/ cdc 37" Micky T Baja AT3s Front bumper Demello Offroad Rear Bumper Expedition 1 ATC canopy AMP power steps Alu-cab RTT Alu-cab shadow awning Alu-cab shower cube
    New custom Alcans. About a 3" rake with Icon 6" coilovers up front. Should settle a bit and when truck is loaded up for trip it in theory should have about 1" rake.



    20210425_110634.jpg
     
  25. Apr 25, 2021 at 8:33 PM
    #1555
    Trdwillie14

    Trdwillie14 New Member

    Joined:
    Sep 23, 2018
    Member:
    #19743
    Messages:
    1,522
    Gender:
    Male
    First Name:
    Billy
    Coastside
    Vehicle:
    2014 trd off road
    2.5 fox 2.5 ads triple bypass T/C uppers Nfab front bumper Westin rear Bajas Rci skids All pro sliders Icon rxt leafs Stt pros Method 701s
    Holy close lol
     
    blackoutt likes this.
  26. Apr 30, 2021 at 12:17 PM
    #1556
    cctxquicksand

    cctxquicksand IG - TRDistheWrd

    Joined:
    Jun 3, 2019
    Member:
    #31410
    Messages:
    721
    Gender:
    Male
    Tomorrow is the day...

    Hopefully all goes well... my setup will be as follows

    Fifteen52 turbomac 17x8.5 0 offsett
    Nitto rg 37/13.5/17
    Jba upper control arms
    Demello high clearance bumper
    Icon rxt option 2 out back.

    pretty aggressive but I’m hoping I can make the 13.5 work, discount said I would bring them back for 12.5 if they don’t fit.

    many advice from you fine gentlemen?
     
  27. Apr 30, 2021 at 12:28 PM
    #1557
    Jman245

    Jman245 Just moving about my way.

    Joined:
    Jan 22, 2019
    Member:
    #24904
    Messages:
    241
    Gender:
    Male
    First Name:
    Jay
    R.CUCAMOMGA,CA to Austin,TX
    Vehicle:
    '19 Tundra TRD SPORT
    Gonna need a Hella bmc!
     
    cctxquicksand likes this.
  28. Apr 30, 2021 at 12:33 PM
    #1558
    blackoutt

    blackoutt YEAH BUDDY!

    Joined:
    Oct 21, 2018
    Member:
    #20805
    Messages:
    684
    Southern IN
    Vehicle:
    17 DC Adventure Build + 07 DC Truck Stuff
    13.5 might hit your fenders if you ever flex like the picture quoted directly above your post. same wheel spec with a 12.5. different tire brands have different true dimensions though so you might be okay.
     
    cctxquicksand likes this.
  29. Apr 30, 2021 at 12:34 PM
    #1559
    cctxquicksand

    cctxquicksand IG - TRDistheWrd

    Joined:
    Jun 3, 2019
    Member:
    #31410
    Messages:
    721
    Gender:
    Male
  30. Apr 30, 2021 at 12:36 PM
    #1560
    cctxquicksand

    cctxquicksand IG - TRDistheWrd

    Joined:
    Jun 3, 2019
    Member:
    #31410
    Messages:
    721
    Gender:
    Male
    This was kind of my fear. I’ll admit I was impatient as the 13.5 was the only size they could get in time for my only two days off this month. If they don’t work I still have my 295/70/18 gramlights I can use until I can get some 12.5 in
     
To Top