DC rear sliding window assistance needed

It's looking like the main window will have to be changed as well.

 

I have the center power slider that I ordered. If you look at my pics versus Cruzers, the tracks are different. I'm pretty positive now that I will have to change out the fixed window as well.

 

I see these, but I have no idea if it is what is needed for a power slider.
I think they only came on the Limited years ago.

2009-2021 Toyota Tundra Back Glass 64810-0C080 | LaGrange Toyota



I'd love to have a power slider that closes when I lock the doors.
I haven't opened my manual slider, ever, in the 9 years I've owned the truck..

 

Yes that is the main window. The center sliding window comes separately. I have all of the parts that I need other than the main fixed window. My 2013 SR5 DC had the power slider.

 

That's a bummer. I'm surprised that the power window upper and lower trim is not all you need, and the whole window is different from the non power window.

 

Look closely at both tracks and see what you think.

 

Yeah I see the difference but I thought that was the difference in the trim. I'm probably wrong? It states the trim is different between the power and no power windows. Or atleast they are 2 different part numbers.

 

The tracks are physically different

 

Yeah that's a bummer man. Oh well, it will be nice to have that window with power. Just wish you didn't have to replace the whole window.

 

Hey could you please do me a favor and snap a picture of where the window motor and regulator is mounted to the back wall? Thanks

 

Sure but I don’t get back home until Saturday.

 

Thanks. At this point you seem to be the only one that has one that can get photos easily lol. I got the glass swapped out so now I'm in limbo.at this point.

 

I found this in a pdf of the 14-17 manual. This diagram shows where it goes, however there are no studs to mount the plate with the flange nuts. Is this where I would have to mount it myself using something like rivnuts and stainless bolts? Do these diagrams give a "to scale" on where it needs to be mounted?

 

Seems accurate to me.

 

Awesome! Thank you so much. These pics help tremendously! Mine doesn't have those mounting tabs so it looks like I will space it out and then have to install rivnuts and bolts.

 

Rivnuts should be good enough. Hope it works out!

 

Made some progress.

 

Everything is done except for running the 2 wires to the motor. I still need to find the part number for the connector. I used a piece of maple that I had left over from the kitchen upgrade to make a mounting plate for the motor. It was easier than risking crooked rivnuts where the bolts for the motor plate would need to go. I'm really surprised that mine did not have the mounts for the motor. I also put some Stinger Roadkill on the back wall while I had the seats out. I forgot about the sharp edges on that stuff.

 

I had to make my own mounting plate but it's all done and operational. Tomorrow the tint gets done. Thanks again @Cruzer for all of the help and pictures.

 

Did you order 2 quantity of #4 or just one and it comes in package of 2 stoppers... and did it come with the scews?

I am in the process myself to convert my 2013 dc sr5 from manual back glass to power... someone was able to do power sliding with their existing manual back glass and track; https://youtu.be/8M-38aXCnqk?feature=shared
I am replacing the entire assembly tho because someone broke into my truck by breaking the middle glass.

 

You just need to order 1 of the #4. It comes with 2 stoppers and 2 screws.

 

Full parts list here minus the connector housing for the motor.
https://www.tundras.com/threads/how...-power-rear-sliding-window-conversion.130717/