What have you done to your 2.5 gen Tundra today?

Second guessing the shackles, pretty happy with how it looks and how it rides. Thanks @InfernoBoyz for the suspension!

 

Went back out to the pick and pull to grab the two extra screw retainers since I'm off on Mondays....cost me the $2 entry fee and they gave me the two fasteners for free, so, the cost of gas essentially.

A word of advice....dont accidentally cut the rear light wiring as it will blow the 7.5A fuse in the engine bay....I taped the cut wires up and tucked them away.

There are three sets of retainers, the middle ones can be removed easily...not the others. Found the screws I needed too, so that was cool.



This one was snapped before final tightening...and after replacing the fuse...


I swapped over the old LEDs I had installed, and everything is GTG.

 

That driver side bag doesn't get in the way?

 

Baltic Birch

 

unsure at this point in time. I haven’t tried it out yet. If so - it’ll be a pistol holder instead

 

That is a beautiful truck.

 

Racking up the mileage lol.

 

Looking good. They are a lot of fun to build.

 

Jealous. I couldnt get two on the passenger side to fit without interfering with the plastic locks and the driver said one (with the bottle in it) interfered with my leg and the gas pedal. I will be looking for one of those cup holder insert things next.

 

Just unloaded the truck from a long weekend going across North Florida. She gets dirty quick up here, but damn the truck runs strong and feels good on the road. Funny, does anyone else look at theirs and go through a roller coaster of what they want to do? For example, here she sits. I hate these rims more than I have ever hated stock wheels before. I know what I want to replace them with, but I want to keep my focus on towing and comfort ride. So the offroad look may not be the best blend options. So, instead, I just stare and wonder.


Then, while looking it over after the trip, I found the mark.... Looks like NFab quality struck again. I will wait a bit and then remove them and raptor line them myself. But damn, not even a year.

 

Friggin love this mod! Nice work.

 

Howdy

Just finished my first round of modifications on a 2019 Tundra. I created a PROJECT BIG BLUE BUILD THREAD where you can follow all the details and ask technical questions.

This forum has served me well so I aim to educate, inspire, and learn.

My first round of modifications focused on interior, aesthetics, and utility. Here’s a list of all the main mods I installed as well as a doc and youtube video…

• EXTERIOR
  Headlights: Alpharex MK II Nova
  Rear Tail Lights: LED Replacements
  Grille: TRD Heritage
  
  
• INTERIOR
  
  $23 18pcs Tundra Interior LED Lights Kit Ultra Bright Map Dome LED Replacement Bulbs for 2007-2017 2018 2019 2020 2021 Toyota Tundra all Cab Sizes
  Interior Led Light: Amazon Knockoff:
  Seats: Katzkinz
  Head Unit: Alpine Halo ILX511
  Sound System: ********* Amp & Speakers
  Subwoofer: KICKER (48CVTDF122)
  
  Center Console Wireless Charger Tray 00016-34506 Compatible with Toyota Tundra 2014-2021 Car Wireless Charger Tray Accessories, Wireless Charging Tray 0001634506 Wireless Phone Charger
  Console: Wireless Charger
  
  $30 ESR for MagSafe Car Mount Charger with CryoBoost, Magnetic Wireless Car Charger Compatible with MagSafe Car Charger, for iPhone 15/14/13/12, Fast Phone Cooling Charger
  Phone Charger: ESR Magsafe

• UTILITY
  Tailgate Lock: Etrailer
  Trim & Keys: AJT Designs
  
  $200 Start-X Complete Plug N Play Remote Starter kit for Tundra 2010-2017 || Zero Wire Splicing!
  Remote Start: Start-X
  LINE-X: SAN DIEGO

Feel free to follow along, I’ll answer any questions you throw at me

 

Jesus I wish my undercarriage was that clean haha Great looking truck!

 

Added more lights, new HF lights - Roadshock Edge, supposed to be good. Work with BD harness, loomed all the wiring and mounted the relays for low/high beams and connected it all to my auxbeam switch (with relays).

 

Did some routine maintenance to the truck. Oil change, tire rotation, change engine and cabin filter.

switching to the fumoto valve next oil change. I’m getting tired of the messy oil changes

 

Heck yeah! I also call my truck Big Blue lol.

 

Not only a badass product - but outstanding customer service. Somehow lost a shackle on a trail run with @TRDFerguson - emailed the company and they are replacing it free of charge and let me know they’ve updated their install instructions to prevent further issues.

 

Thats darn impressive.

 

They offered to replace both if I wanted a different color.

 

Installed my front of bed MOLLE panel yesterday. Went pretty well, but for two things: 1) the far right side M6 bolt and nut for the cargo track was stripped (came that way?), and 2) I did not have a T55 Torx bit for the bed bolts. So, after using a box cutter and pick to peel off the bed liner from the bed bolts, I ran to Lowes; $9 for a T55 and $69 for a Metric Tap & Die set. I did have to trim my bed rug to fit around the bottom brackets of the panel. Sorry, it was dark when I finished up, so no pictures, but this is where I purchased (they didn't charge sales tax, and free shipping): https://yotaforce.com/collections/c...tundra-bed-molle-panel?variant=41000524021869

 

Got new tires, Toyo Open Country A/T III

 

After putting this off since I bought the truck, I finally bought a ProClip USA mount and holder. Prior to making the order, I messaged ProCip to confirm what phone holder they recommended. Jack M was a lot of help, but unfortunately the holder they recommended did not work. In fact there was a fairly large discrepancy in their sizes for thickness, which listed on their site and the sizes listed in the product instructions. (Refer to standard dimensions shown below)
My phone case is .5 inches thick and it was not secure in the original holder they recommended. I called up ProClip and talked to Jack and together we confirmed the holder would not work. I had to place a 2nd order for the next size up holder but he upgraded to 2nd day shipping (at no cost to me) and applied the original discount I used (15%)
He also sent a pre paid shipping label for the first holder which I’ll receive a full refund for.
2 days later, the new holder is delivered.
I confirmed it would hold my phone correctly and proceeded to install it.
The install went smoothly following the instructions they provided.
Time will tell how it holds up, but based on testimonials I’ve read, I don’t anticipate any issues.
If you’re on the fence about buying one, I would recommend messaging them to confirm what you need and so you have some back up if it doesn’t work. Communication was fast and to date they have stood behind their word.

 

Been eyeballing these holders.

 

Washing day!!!

 

LS 103mm throttle body and a larger intake pipe from 4.5” to 5” being made up.

 

$$$$ to burn....

 

dang that's a big boy

Reminded me that I've just had my ported 85mm TB sitting in its box since I got it Saturday. Need to get off my butt and install it...eventually

 

I wish… hopefully recoup some back after I sell the RCF throttle body lol

 

let me in guys!