disable alarm on 2016 Tundra Platinum

Hello, Does anyone know how to disable the alarm on a 2016 Tundra Platinum. Our dog will bark for a few minutes and set the alarm off. I have removed the fuse for the horn but there must also be a second horn for the alarm only as it sounds off but with a different tone. Even leaving

 

why no just turn down the GBS sensor a little.

 

Thank you for your reply. Was not aware of a GBS sensor but now know what it is. I will have to locate it and see how it is adjusted. Any tips on how to adjust

 

Tuffy, searching this site or even a google search will enable you to find almost any info.

look here https://www.tundras.com/threads/adjusting-glass-breakage-sensor.64562/

 

these may be helpful too

https://itstillruns.com/disable-tundra-factory-alarms-7771263.html

https://www.tundras.com/threads/factory-alarm-keeps-going-off-every-20-min.32755/#post-812393

https://www.tundras.com/threads/help-alarm-still-going-off-updated.73983/

How do you turn off the alarm on a Toyota Tundra?
Keyless Remote

1. Insert the key into the ignition. Turn the key to the "ON" position. ...
2. Press the "Lock" button on the driver door panel. Press the "Unlock" button on the driver door panel. ...
3. Press and hold the "Panic" button on the vehicle remote control for two seconds to disable the alarm.