FS: 2018 Tundra LED Headlights Plug N Play wire Harness for 2014-2017 models

If you are planing to buy headlights, go to your local dealer and ask them to match @Roman's price. You will save $ on the shipping. My lights came in next dsy. I paid $630 total.

 

I paid 287$ a light plus shipping and the harness on here are about $175 shipped then the motocontrol is $35 plus shipping

It’s pretty simple to swap lights I’d guess this would take me about 30-45min tops to do.

 

Any help please, i did everything as the instructor say took my time, unplug the battery, connected everything, then when it was time to check, the light and the high beam did not work, the hazard light was good, signal work fine, the led drl work , except for the lights, please help anyone.

 

Please make sure connections are good and sometimes people forget to plug the motocontrol 3 way Plug to the old headlights connector

I PMed you, sorry for the delay responding, currently at my work

 

He's got it fixed. He just didn't seat the connector under the dash all the way. Post up photos Ely010606!

 

First of all i would like to give a shout out to @rocky_mtn_trd , for being the technical support helped me through out even though he had other project he was doing , he still took the time to help me out thank you and greatly appreciated .Second of all @iHacker this is bad ass, thank you also for the help. Here it is.
This forum totally kick ass, nice people all around.

 

If anyone's on the fence on this upgrade, just do it. No comparison to my oem 17 lights. Special thanks @iHacker for the harness and his tech support at 10:30 on a Friday evening.

 

Thank you @iHacker , this is sweet

 

Im definetly on the fence because i have a set of brand new retros sitting in a box that look badass but like the new oem lights

 

Same here, I bought the GTR Lightning headlights and fog lights from Headlight Revolution, and on Black Friday I pulled the trigger and just bought the 2018 oem lights and fog lights from Roman, after reading @iHacker thread, and what everyone was saying about it , I have no regrets and this is bad ass I totally like. Just need to sell the GTR now, lol.

 

OK, completed mine a couple of days ago. OMG.. what a difference!
Used iHacker harness (nice piece of work) which went in easily but having an SR5 what I thought was the white wire wasnt so Hi DRL intensity no worky...
Reading the build threads and confirmed by iHacker.. i ended up running a line for power back to the main fuse box under hood (thru same nipple in firewall) and tapped the LED DRL empty fuse slot (how conveniently named and I dont have to pierce any wires or store the "in cab" junction box cover in the glove box ).

Now I am eager to do the anytime fog mod.

Advice for those who are planning this... to de-pin the grey wire.. you dont have to force it or be aggressive... positioning a tiny screw driver (like comes in an HF eyeglasses set) in the notch and gently lifting away from the pin will set it free!!!

And 100% agree with the others who have become addicted by the builds on tundras.com

 

Everything worked perfect. Thanks iHacker.

 

Believe me when I say I really want to do this, but I admittedly am confused about a few things. BBQ I get, electrical shit goes right over me, lol.

 

Guys Please check my updated post #1 in this thread, now added all my instructions for DRL harness install pdf

 

I have a limited and just tapped the two wires in the cab and my DRL is not working. Before I hooked up the two wire in the cab my the orange DRL was working and now it quit working even with the Posi tap removed from the gray wire. Everything works except the DRL.

 

Did you unplug the flasher harness to posi-tap it? If so, make sure it's fully seated back in its home. Do the turn signals on the same amber bulb work? Is there a chance you severed the gray wire w/ the posi-tap? Post up photos of your tie-ins. Also check fuses and check to make sure you have 12v power where you tied in under the dash with the key switched on. Sounds like you possibly had the battery connected while doing this mod? This may have blown a fuse or two.

 

I made sure the battery was disconnected, the turn signals are working and both wires are getting 12 volts. I am gonna recheck the gray wire tomorrow when their is more light to see if I severed it with the Posi-Tap.

 

Got it to work, I guess I didn’t have the flasher plug seated properly.

 

Word! Definitely not the first time this has happened. Glad it's up and running!

 

Another satisfied customer!

 

hi ,good job on your headlights looking great,can you please tell me what should I get to have my LED headlight works?parts number or links will be awesome. thanks in advance

 

The very first post gives you all of the part numbers and everything you need to order, just have to read through it. Welcome to the board, go introduce yourself

 

Hello iHacker. Thank you for your work on this harness. I have a 2015 TRD PRO. Do you still have harnesses available? Please PM me the payment information. Thank you.

 

Ihacker, you are the bomb! I appreciate you answering ALL of my questions and helping me with the install! Love the new look, before and after. Now it's time for a bath!

 

Can someone post up pics of the 2018 headlights showing black housing and the chrome housing? Not sure which one to order. Pics aren't available on the site I went to order from when putting in cart. I want to see if there are any differences. Thanks

 

Thanks! Wasn't sure if the front of lights were any different.

 

Here is a side by side. Chrome on the left, black on the right. Image courtesy to @anthony17plat

 

Thanks guys. How long after you ordered lights, harness and motocontrol did it take to receive them?