TRD Pro Wheel Well Camo Trim

does anyone know if the trailhunters wiring kit comes with instructions for installation? i can't find any online and was looking to see how it done before buying. i'd be looking to do the quick disconnect kit. the Rave kit looks nice but it seems pretty pricy for what it is.

https://thetrailhunters.com/shop/exterior/2022-tundra-trd-pro-fender-flare-marker-light-plugs-kit/

 

I don’t believe so but it really doesn’t matter what kit or adapters you use as you can make the wiring as straightforward (or complicated) as you like. The easiest solution is to tap into the tail lights for the rear and the running lights for the front.
The instructions for R are attached and the video I used as a reference is below. Be advised that on my truck, the front wires I needed to tap were the middle and solid color wire, not the outers like he did so make sure you have a tester. For the rear lights, I used a 7pin dual output trailer harness from diode dynamics.
https://youtu.be/gsL99_euN0U?si=h1bLAsa6wcLA7qqb

 

You can’t tap into the running lights of the headlights if you have premium headlights. I’m wiring mine to a 7 pin to 4 pin harness. Super simple. If you want them on all the time when the truck is in you could also run an add a fuse to the fuse box.

 

How did you wire yours? I have a platinum and want to do the same thing. Do you have pictures of your truck? Thanks for any help

 

I haven’t installed mine yet, still waiting for the flares. But after a bunch of research, I am wiring them all the a 7pin to 4pin harness. This way no oem wiring is tapped/damaged. I am using deutsch y connectors, and connectors so everything looks oem, and on one harness.

 

Trying to order them but no one has them. I guess there is a back order of 200+ in the nation with no eta.

 

You can wire them to the fuse box in the front , eng igr 1 for passenger side and eng igr 2,3,4 I think you have choice (7.5 fuse) on driver side
They will stay on whenever your truck is on , kinda like how marker lights should be .
If you order the wiring harness from rave off road it was the easiest for me to do , I did have buy an extra fuse tap from the local auto part store , as I did not want to run the driver side wiring all the way to the passenger side to tap into.
I am still waiting on rear fenders but the rear wiring is all plug and play. So will be fairly simple

 

Thanks to all that contributed to this subject. I read all the pages that started since 2022.
Great mods.
I would suggest to everyone that is having fun modifying their truck, to Start thinking LONG TERM
Meaning you will be adding a lot of things to your truck and in no time your truck wiring it will look like a wiring hornets mess.

Add a light controller with a fuse box . I know this from having my Jeep for 9 years.
This will help you organize your wiring and make it easy.
Lots of options out there. Some are cheap , some very expensive. They all work great and do their job.
Good luck to everyone having fun

 

Taikowaza - Do you think this will impact service, with the technician seeing the modification? thx

 

I have had my wired marker lights installed for months and have had service and recalls performed during that time with no issues.

 

Same here. No issues.

 

thank you