Wheel spacer help?!!!

im installing my wheel spacers, and the studs don’t come all the way through the nut.
How bad is this???

 

Are they at least flush?

 

Pretty common. You need a different set of nuts that extend into the bore to catch more threads.

 

Nope.

 

Yea. That ain’t gonna work.

 

What brand spacers you have?

 

I guess I could drill them deeper, but then there’s less of the spacer being held on.

 

I don’t know the brand. I bought them used from Amazon.

 

You need these.

 

First mistake honestly. You’re putting your life in the hands of no name brand used parts.

 

Got to be careful, you definitely need hub centric spacer. Most guys go with Spider or Bora

 

x2, I would return them and go with the 2 mentioned

 

^^ Agree with above comments.

 

Ok. What are they called? What are the odds anyone local might have them?

 

Just in case

http://www.spidertrax.com/2007-Up-Toyota-Tundra-Wheel-Spacers

 

I had read that on here, which is why I made sure to get hubcentric spacers.

 

But you bought no name brand used ones. That’s a big no no in spacer land. You’re trusting these parts with your life.... And you don’t even where they came from

 

Maybe check with 4WP? They might even have the Spider or Bora spacers in stock too.

 

Send them back CRASH , seriously. You do not want to lose a wheel rolling @ 70

 

I guess I’ll be sending them back and just going without.
Spydertrax doesn’t show to manufacture 2” for our trucks and Bora is over $300.

Everyone in here can just keep telling me how terrible my fender flares look with the wheels tucked in. Lol

 

Those are called ET (exrended thread) lug nuts. Most aftermarket wheel shops will have them. I dont use paypal but I do have a set of Spidertrax not being used. I used them for about a month before getting my wheel package.

 

Check with your local tire shops they might have them. They are called shank lug nuts
You need to measure the wheel spacer for thickness and buy the nuts that are a 1/4 to 3/8 shorter than that spacer thickness.

 

Serious question here... Do wheel spacers have any effect on ride quality? Would it make for a harsher ride?

 

I have 1 1/4" , been running them for about a year. No problems or complaints

 

SOB! I was curios looking at Spydertrac wheel spacers and I accidentally put in a order. I just wanted to see how much they would be shipped to me And I just saw a statistic today quoting how much Americans spend online when there intoxicated

 

That's how I got my lift and tires

 

YOLO! i did the same on my last Tundra. This sight is the devil.

 

If my wheels are a +20 and adding 1.25’s spacers. Will this put me at 0 or a little past? I have bushwaker flares on right now. I used to have CST spindles on that kicked the front wheels out 1.25. So is this the same as the wheel spacers?