WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Got some goodies installed. ARB dual compressor, Blaze Offroad Rear Power Kit, Garmin Powerswitch, SDHQ Under Hood Power Solution Kit, C4 Lo Pro Bumper, Warn Zeon 12S Winch and a bunch of Baja Designs Lights. Next things to be installed will be roof rack with Baja Designs LP6's. Install by @boatzNhoez

 

Quick mockup to test if the scan was scaled properly, and it was! eyeballed the orientation so it’s a lil tilted but I kinda like it

 

I bought another switch and black plastic fairing for it, I did it to make it easier. Wish I could do what the 25's had for the tail gate to raise without manually doing it.

 

Despite the cold and snow here in Kentucky I decided I was gonna put on my Rhino Rack Vortex Bars.

 

Shoutout to @Bnewman077 and OC Tire N Auto in Fullerton, CA. for taking care of me. Installed the leveling kit, Icon Recon SLX and new 35” tires today! Truck looks gorgeous!

 

which are you trying to do ? I have scanned and created STL's for almost everything in the front of the truck. ( just finished a custom camera mount for rear window (trucks with the slider window)

Would enjoy seeing what your doing as well....

 

First time she's seen snow

 

Thanks RC for stickering the hell out of the fender liners. Damn it

 

WD-40 is your friend

 

Steam too

 

Mine were on the back side, but I still removed them all

 

Nice! Was mostly trying to get a scan of the trim to the left of the steering wheel to make a flush mount for my auxbeam switch. Also wanted to get some of the cupholder geometry to design my own cupgrip-adjacent thingy. Was going to take off the front bumper to scan mounting points on the frame just in case I wanted to make my own front bumper but I think I’ll end up buying this one when I have some extra cash: https://outgearsolutions.com/products/2022-toyota-tundra-prelander
I’m going to add to my 3d printing thread with my files once I get some time to process the scans and design some parts. Would love to know what you’ve scanned and what you’re doing with those scans!

 

3d print folks - how about printing a hard frame for the cabin filter that would allow use of generic hvac filter material?

 

Takes like 3 seconds to peel them off.

 

Let me know specifics and I can do it...

 

This is a good idea, I like it.

 

This is awesome that you’ve gotten a lot of STL files. I’ve been looking at trying to recreate the top center dash tray piece that has the cigarette lighter outlet. Do you happen to have a file on that one?

 

Nothing major...

Blackout of door handles.

I KNOW, TRUCK IS A HOT MESS. Was Minus a Bazzillion here the other day.

 

are you looking for a "cover for it" or the actual stl of the tray itself ?

I have a 2023 SR5 Tundra , so if its the same, then I can covert it this afternoon. I went alittle crazy on scanning everything I could when I took my dash apart to put some simple mods on/in.
I started to create some custom items and listed them for sell, but I also like to share the files with the group.

Had 1 person already take a file and try selling it.. (which sucks) but ohh well...

 

I was wanting to get the tray itself. I'm trying to make mine into a wireless charger for my phone up in that area. I tried scanning it with an app on my phone and drawing from it in SolidWorks but didn't turn out like I wanted. That piece is surprisingly more difficult to model than I thought. I'm not looking to sell it, just wanted something to go by so I can draw something up and 3D print my own custom tray there that would have my integrated wireless charger for my phone. The trays should be the same for all of our third gens. Any help would be great!

 

This might be irrelevant if you popped that tray out to scan it / already thought of this but: What you could do is pop the tray out, mark and drill some holes for an adapter plate and then print whatever customizations you want to do and mount it to that plate. I wouldn’t drill into that tray while it’s mounted to the dash bc there is some wiring / the head unit behind it. Double sticky tape sticks really well to those plastic trim pieces, so that honestly might work too. Love the idea of a plug n play tray replacement but designing the drafts / mounting locations to the rest of the dash seems like a pain.

 

That's a good idea. I have popped it out a couple times to check what's below and you're right - definitely don't want to drill into it while it's mounted. I started up trying to recreate the drafts and all but you're right it's been a pain so far. I'm still making tweaks and printing examples for myself. At some point, I think I'll get it then can hopefully share that with others here. I've already purchased a wireless charger body that would go with my setup as well as a way to plug it into the connector that the cigarette lighter plug was connected to so that there is not splicing into factory wires. Just need to get the tray piece correct!

 

@TundraWA2017 dude, you're profile pic and caption under your name is amazing. Love that movie.

 

How long was your wait on the Blaze gear? I have their Garmin mount, rear bed power, ditch light harness and SDHQ terminals on order. Going on week 9 of 6-8 week wait. I know they are slammed and not complaining, just curious.

 

That sounds like a long weekend of installing. You are gonna hate having that compressor inside your cab they are so loud. I hated listening to mine in the engine bay of my tacoma.

 

Installed VLEDS LPX License Plate Light bar with Frame. Install was 15-20 mins. Thanks to this thread! I would have never known it existed.

 

same. Installed mine 2 weeks ago. I like it

 

You guys have pictures? Have you towed yet? Curious to see if it messes with any of the tow systems.

 

no pictures. Haven’t towed with it. But it’s exactly like the photos in the website. The $170 one comes with a 7 pins connector that you “piggyback” to the oem trailer connector. Shouldn’t mess with the system

 

I bought my '23 Tundra used and the recall showed up in the app right away. Dealer provided the second fob no problem... only catch is it does not include the shank! Apparently, the original buyer should have had two shanks one one fob, so the recall only provides the second fob. New (second) shank costs around $60.