WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Let's see them platinum and 1794s with 2" or 3" lifts on stock wheels and tires!

 

Do you have a picture of the bikes in the bed and the cover closed?

 

Any chance you can provide some pictures of the switch on the dash and the wiring in the door well?

Looks great!!!

 

What are the brand and model of the fork bike mounts you used?

 

$25 MBP Versatile Bike Block - Thru AXLE (15x110 12x100 15x100) & Quick Release 9x100mm - Bicycle Truck Bed/Storage

https://www.amazon.com/dp/B08DHDHZMX?ref=ppx_yo2ov_dt_b_product_details

$17 MBP Alloy Quick Release Fork Mount Bike Block (9x100mm) Truck Bed/Rack/Storage

https://www.amazon.com/dp/B07MDXZGMB?ref=ppx_yo2ov_dt_b_product_details

$13 RED WOLF 3/8"-16 Thread T Slot Nut for Toyota Tacoma Tundra Pickup Trucks Bed Deck Rails Stainless Steel Tie Down Accessories

https://www.amazon.com/dp/B07Q8JWB88?ref=ppx_yo2ov_dt_b_product_details
i had to drill out the outer holes of the mounts to fit stainless steel 1" hex bolts and washers from Home Depot. 2 T Nut in the bed rail per mount.
https://www.homedepot.com/p/Everbil...inless-Steel-Hex-Bolt-5-Pack-812370/302007727
https://www.homedepot.com/p/Everbilt-3-8-in-Stainless-Steel-Flat-Washer-812176/301928671

 

Fixed a flat… nail in one of the tires.

 

Put some rb20 running boards on. TBH they could be up to six inches longer to go flare to flare. But they do the job and look pretty sweet.

 

Where did you find the covers for the hood emblems?

 

vendor who we shall not name here

 

Yeah. Don’t recommend. Good from far but far from good.

 

This looks nice! I'll have to check that out. I liked the OE a lot but last I looked you couldn't get it.

 

I had a bakflip on a previous truck and I’m liking this better. Not sure about waterproof yet but it’s not a huge issue in AZ.

 

Thanks

 

Just installed RC Vertex Crossovers, need to set the height, didnt realize you need a spring compressor to do so. Expected to jack up truck and make adjustments.

 

As it sits after install

 

What size lift?

 

Those are Vertex 2.5 coilovers, no lift, just level

 

I talked with a local shop who builds some nice trucks and semis, they said the front could easily settle the 1/2" to 5/8" needed to be more level. They are going to do an alignment on Friday and I will run it for a few thousand miles to see how much it drops. I will say, testing the coilovers, I feel the ride is as good as, if not better than the stock front suspension. And I used a rough train crossing, PA roads, and some road to bridge transitions to test it out.

 

Wheel and tire specs? I am LOVING this setup! Nicely done

 

Wheels are Vossen HF6-4 Terra Bronze 22x9.5 @ 20 offset
Tire are Toyo Open Country AT3 305/45R22 (32.8x12x22)

If I recall, I have 1.25 inches of poke past the fender flare edge.

As dumb as this will sound, the truck is taking on a different stance than I was expecting. I didn't think it would sit as high as it does, which most will think is nothing really. I am 6'4" and it feels bigger to me, lol. I can't imagine driving a truck that has a 6"+ lift on it. All said and done, I am happy with it so far, plan to lay off the mods for now.

 

I think you put it together perfectly. Never realized how much I like a Wind Chill 1794 with bronze wheels. Those Vossens work just right.

 

I owe the coilover install to my son, he got home from work and seen me in the garage and immediately jumped right in and knocked it out. So glad he is a go getter, lol

 

I have added 2 K&N Air Filters, and a stage 3 for more HP, and torque!
I like the difference. Check out Thorton Chip Tuning!
They say 50 to 60 more H/P and more torque with a bump in MPG!

 

They claim 60hp and 5 mpg for my 2024, sorry man, aint no way that is gonna happen. Read alot about this across many forums and it just doesnt live up to the claims.

 

Also be careful with the K&N filters they can cause you some issues.

 

1st time truck owner, long time lurker, 1st time poster... Thanks for all the inspo!
Got my new 2024 Platinum Hybrid in Wind Chill Pearl in Feb 2024.
Ceramic tint all the way around, including moonroof from Roman Tint Company in Sarasota, FL
Weathertech Alloy Cover - I haven't seen anyone else with this tonneau, I love it
Cali Raised center console tray liner - essential upgrade but pricey for what it is

$130 RefitEco Bed Mat Compatible with 2022 2023 2024 Tundra Exterior Accessories Rubber Trunk Bed Liner Heavy-Duty Cargo Mat All-Weather Protection (Only Fit CrewMax with 5.5ft Bed)

RefitEco bed mat - exactly what I wanted

$45 CARISTA OBD Scan Tool and App: Diagnostics, Customizations, Service Procedures and Live Data for Your Vehicle

Carista OBD - killed engine noise, lowered AC temp, killed seatbelt alarms

$34 HCMAX 2 Pack Kick Mat Car Seat Back Protector Waterproof Easy to Clean Multifunctional Organizer Storage Bag Travel Accessory PU Leather Black

HCMAX 2 pack back of front seat protector - these kids are just brutal



In Feb 2025 (after I get my bonus check) I will add wheels and tires:
Wheels: WELD CINCH W104 20x9 6x139.7 +20 W10409098576-P2 - 31 lbs (confirmed by Weld)
Tires: Toyo Open Country A/T3 275/60R20 115T SL - 42 lbs
Total weight: wheels 31 lbs + tires 42 lbs = 73 lbs (stock Platinum setup is 76 lbs)
This super lightweight setup will have minimal impact to gas mileage and ride quality. Anyone running a similar setup today?

 

Finally put my chase rack together.

 

Installed a FitCamX dash cam today. Pretty easy install and a very clean finished look. So far so good.

 

I installed GoRhino RB30 originals on my 2024 TRD Sport yesterday. I did flip the boards the opposite direction after looking at photos preferring the square facing the back. Youtube videos helped a lot! Definitely like my choice with originals with bed coating, though GR only uses powder coat on bottom. We hit that with Rustoleum bed liner & primer along with the mounting brackets. Will see how it holds up. Bought from vendor santanaRT here. Happy I can now get in much easier at 5'5" lol...

 

Installed the OEM bed step and the Rough Country tri fold flip up bed cover. All in all, took me three hours total.