What have you done to your 2nd gen Tundra today?

Made some quick changes to the front end and got rid of the chrome... now looking for hood bulge replacement.

 

Almost got it

What have you done to your 2.5 gen Tundra today? | Toyota Tundra Forum (tundras.com)

I think the below is it, might want to double check
2014-2020 Toyota Tundra Hood Molding 76180-0C030-C0 | OEM Parts (oempartsource.com)

 

Gave the Truck a rare winter wash.

 

Installed a 2020 Toyota Sequoia TRD Pro grill on my 2013 Tundra

 

Crap!

 

Bought another 2nd gen. (Wifey's new ride)

It's a 21 sr5 4x4, already have some goodies on the way

 

Poly bushing swap - LCAs and steering rack, with LBJs. Drives firmer, but good for a lifted truck and closer to new/stock. OEM rubber was toast.
Had to drop the bracket lift to get to the steering rack, which required disassembling the entire front end, that was fun. A ton of work alone, but well worth it.
Final project - repainting hood and roof. AZ sun baked the clear coat off.
Then I'm planning on selling... unless I can convince myself otherwise.

 

Temporarily mounted one of the platform on the canopy. Temporarily because I will transfer it to the cab after I get the Backbone mounted this week and I didn't want to haul it in the bed. I'll mount the other one on the canopy and add the rail kits next time I go down off the mountain. I also put new struts on the canopy glass (now I don't have to use a prop rod) and lubricated all the door hinges, handles, and latches.

 

ooops

 

Added MOLLE storage to the DC folding chair back.

 

This right here is a great idea, even on the models where the seats fold up from the ground. Thank you for the paradigm shift!

 

I've never bought anything from this company but some of their products look like good ideas. https://www.roaringfiregear.com/new-items-and-deals

 

Put in some work.

 

Mounted the RR Backbone on the truck. If anyone installs one, I highly suggest skipping using the included rivnuts. Instead, drop the headliner and use bolts and nuts with SS fender washers. The rivnuts don't all expand below the lowest layer if metal an instead I had half of them expand inwards. I am also going to change out the RR stainless internal hex bolts and put in stainless bolts. The included bolts have very small heads and the included washers leave a bit to be desired. So, I will use 1/4-20 ss nuts and bolts with SS washers that are a bit bigger.

 

Has your truck ever seen these substances called rain or snow? That truck looks like it came off the factory floor.

 

spent this morning finding a place with spring press machine since after I pulled the passenger side coil over out the table top plastic case spring compressor wouldn't fit in the coils. Pulled the drivers side coil over dropped both off to get new 5100s put in em. And then spent my time cleaning hardware and cleaning the frame and suspension and hitting it with black paint. By that time I got the call they were ready and picked em up stuffed them back in. Hour day well spent

 

Re-hardwired my escort radar detector
Tapped into floor light so it comes on and off with that cycle.

 

California....

That's his wife's '21 sequoia, but still.... California...

 

Openend up the bottom,rod bearings of cilinder 2 are f*cked,hoping to save the crankshaft and blue marks on the rod end.

 

Y’all know the deal

 

cleaned and painted my tow hitch , just trying to keep things from underneath looking horrible.

 

Is that a home plow? Not tilt from side to side right?

 

Yep. Side to side manual 3 point. Auto winch lift/lowering. Dk2 summit 2. Absolutely love it

 

This is my bad boy

 

Saweet

 

Lol it only has 300 miles on it. It's a 21 sequoia, still more goodies comming in

 

Morimotos and TRD Pro Sequoia grille conversion. Yota LED amber Raptor lights are next.

 

Moved the platform from the canopy to the cab to get everything marked for it's final location. I'll take it off next time I go off the mountain so I can wash the truck and wax the roof and canopy. Then, they both go back on with their rail kits.
I also pre-drilled holes to mount side lights on the backbone. I'll tap them before I wash the truck.

 

Did you get cloth interior or leather? I'm curious if the newer cloth SR5s still get the folding passenger seat.

 

Installed a diff drop (3.5 inch lift), installed a swing out bike carrier and my RRW came in. 17 inch, 0 offset