What have you done to your 2.5 gen Tundra today?

Best kind

 

Repaired the threads on one stud on both sides of my front end, all due to a locking lug that wasn’t deep enough to accommodate my extended studs. Also picked up a set of pro comp fenders. Going to order a set of new aftermarket fenders and cut those up opposed to my stock ones, then have it all painted Cavalry blue. Taped them on just for a mock up.

thanks again @LILTRD

 

Many of those taillights let moisture in and they can short out the boards. Also, there is an error on some of those taillights where there’s an option to connect a resistor to the brake/parking light circuit in addition to the turn signal circuit. If that resistor fails from working overtime, you will have a short.

 

Look at that travel! I love new tire days.

 

Took the family down to the snake river for some fishing.

 

If that happens, is it as simple as removing the aftermarket LEDs and installing factory ones? Or would there be catastrophic electrical issues that could happen?
Reason I ask is because I replaced my factory tail lights with aftermarket LED ones after I found a cracked hole in my passenger tail light. So rather than replacing just the one I thought I'd give it a go with LEDs.
I do love the look of my LEDs

 

Little late afternoon run to break in the new tires and see how these containers hold up. Confirmed all fluid still contained.

 

Making me think twice about keeping my LED tail lights, I hate my back up lights as it is. They are not bright enough and I cant change them. I'm glad it worked out for ya.

 

Kind of like assless chaps, huh? I dig it.

 

Where's the 0w20

 

Correct. The turns aren’t the issue. My point was that if these aftermarket tails are connected to a resistor on the brake light circuit that the light manufacturer provides, it can cause issues.

 

Got em exactly ... maybe 6 mos ago
Just can't believe how much floor liners cost
They are fine fit perfectly & s33m solid
Anxious to see if they hold up but I can vouch they're great 6 mos in

 

You’re so cheeky…. lol

 

Hahah right next to the blinker fluid

 

Thanks! I did end up buying them and got em installed next day. I love the fitment

 

Washed it. And listed it for sale

https://www.tundras.com/threads/2019-cement-limited-crewmax-trd-or-39k-81k-miles-arkansas.146365/

 

Dislike.

 

I have mixed feelings. Still have my 2000 which will be my daily again. In the midst of a rejuvenation project for it. Just don’t need 2 trucks, or a really large one. Sold my camper, so the camper we are buying to replace it will be 4200# and could be pulled with anything else we own.

 

I totally get it and I’ve been loosely following your conversations about it on some of the BS threads. I’m glad you’re at least staying in the Tundra fam. And, of course, GLWS

 

It’s not the trucks fault. All it’s ever done was all I asked of it. Roomy, comfortable, capable, dependable. The 2.5 is Toyotas best full size truck to date.

 

Drove the tundra along the Columbia and found a nice beach. Had it all to ourselves.

 

I swapped my ditch lights from XL sports to lp4's.

 

Had it washed and polished.

 

Y tho

 

But really, looks great! Can’t wait to see you get it dirtied up again

 

Just to get it dirty again lol

 

Jinx

 

Kinda like making the bed in the morning.