What have you done to your 2.5 gen Tundra today?

Yessir
Factory painted under the black vinyl.

 

I think the low grade (SR) models came without the black vinyl from the factory.

 

Awesome, thanks for letting me know! May need to take a stab at this. Use goo gone or equivalent product to get rid of the residue?

 

Yep. I was trying to find the pic that I saw of what the Barcelona looks like with it removed.

 

Here's a couple more pictures, had to remove the front mud flaps. But what a big difference 35"s and a wider tire / half an inch of more offset make

 

And here's the almost final product of these other wheels I attempted to paint.
Once I can find out how to get the paint of the tires, i'll put them up for sale. I found too good of a deal on a almost new set of those at3s in 17" wheel, so that's why I went with the Alphas foxtrots in the previous post.

 

Update:
Using some Google-Fu, I ran across this thread on site. Just an fyi, post #8 in that thread got my XM radio back up and working for me:

.

 

So I guess they went back to Fox? How many miles were on them before the service? Street mostly, some off road? So, 3 weeks was the turn around time? Thanks. Just picked up my '21 with 31k and was wondering on service time. Thanks.

 

Hey @War_Wagon312 Send me a PM!

 

If you’re in CT or near by areas and want to get your exhaust done, Ravy Discount Mufflers in Waterbury is the place to go.

Added the Carven R muffler to the truck and Beluga definitely sounds like a different white whale…

 

We need a sound clip sir.

 

As requested:

https://jmp.sh/s/jpQbaUKS48s38MmH38Pg

 

Nothing too crazy, I hit a mileage palindrome this weekend.

 

Taco Tunes Cat Shield installed:

 

Just shy of 50k. Had a week of vacation planned so I shipped them off prior to use that as time I didn’t have to drive it. Daily driver with hunting and fishing trips off road. Fox had them less than 2 weeks. They didn’t provide a shipping notification so I got lucky with my dog sitter seeing them on the front porch and bringing them in.

 

I just looked at your pic again. Did they do any cosmetic referb to them? They look brand new.

 

Just did a transmission drain and fill earlier today. Should be good for a while now

 

Thanks Ronius, I also thought it was a strange response from the company since I watched their promotional/install video and they expressly mention that it is a direct fitment for any 2 inch receiver/7pin harness. I only emailed them to confirm the steps necessary to return a product (if by chance there were any issues) and after I mentioned what product I was looking for and for what application, they then said there 'may' be custom wiring required to avoid warnings, then I held off ordering?

After your feedback, I may just go ahead and order the light considering it's on sale right now anyway.

 

Changed the oil, cabin air filter, and engine air filter for the first time on the 4runner and Tundra. The 4runner was super easy - the vertical oil drain was cake. Because of that, I figured the tundras would be easier, but that angled drain hole is a doozy. Poured probably a quart onto the ground/wheel/inside of skid plate... What a mess. After doing the 4runner I was on the fence about installing the fumoto valve I got for the tundra, but definitely put it on after that mess.



I wish the threads were just a bit different because the valve arm is pointing forward (I'd rather have it point aft), but no matter how many times I started it, it would end up in the same place. Oh well.

I bought the lever lock clip also, but I cannot get it over the head for the life of me. Is there an easier tool for squeezing these?

 

I think this might be the thing.

$13 2PCS Hose Clamp Pliers Repair Tool, Angled Band Hose Clamp Pliers and Swivel Flat Band for Removal and Installation of Ring-Type or Flat-Band Hose Clamps

#NA 2PCS Hose Clamp Pliers Repair Tool, Angled Band Hose Clamp Pliers and Swivel Flat Band for Removal and Installation of Ring-Type or Flat-Band Hose Clamps - Amazon.com

 

Anyone know which rims these are? On a members truck but he hasn’t seen my reply asking

 

Per Google lens

https://www.customwheeloffset.com/w...ion-rocker-rough-country-suspension-lift-35in

 

Nice, yeah, those looks like they'd work. Thanks!

 

I need to do this. I have the fluid in the garage along with the o-ring and crush washer. Did you just drain and fill what came out or did you perform the temp check?

 

Save those empty paper envelopes that you get from ordering stuff on Amazon and then use it to create a shield from the skid. That’ll make sure your oil only goes into the oil pan.

Or use plain old newspaper. Learned my lesson to not use any of that and had a ton of oil inside my RCI skids.

 

When I did mine, engine was cold so ATF was cold too. Drain and fill same amount. Bought a plastic food container on Amazon that was 16qt. Clear and precise!

 

Wednesday I installed a motofab 3” front 2” rear leveling kit. Friday on the way out of town, I mounted up some 285/60r20 Toyo Open Country RT Trails. Immediately took her up to McCurtain county Oklahoma and found some FUN trails to hit! Wife and I enjoyed a long weekend and spent most of our time driving around the sides of the mountains up there.
VERY pleased with the Tundra’s ability to tackle all the terrain with ease and comfort. Had so much fun and can’t wait to go back. Now looking into skid plates, and cat covers.
Open for suggestions…. Lol.

 

Perfect. Thanks!

 

Truck is looking awesome.

 

Mccurtain county? I’ve got a ton of family in Idabel. Gorgeous country up there.