What have you done to your 2.5 gen Tundra today?

Which tonneau and which tape did you use?

 

Running bilstein 6112 at 1.9” on the front, 5160 on the rear with a +2 coachbuilder shackle

 

Gave her much needed bath this morning and then took the family to the park to burn energy! Mission accomplished lol

 

What brand are those? Looked around, couldn’t come up with anything.

thanks!

 

Thanks! It is a dealer installed bumper step/guard. The supplier is Borla. I like it, looks good and with the built it step makes it practical as well

@batman900 did a little digging and was able to get one directly from them.

 

Go Rhino D6 Dominator boards. I have the same ones installed. Can see them in my picture I posted above.

 

Installed some 5160s in the rear, and grabbed a Badlands Off-Road jack. Now to fab up a mount for the bed.

 

Impulse buy, but so glad I did it.

Rhino rack cross bars.

 

LEER tonneau cover. Used foam tape from hardware store. Cleaned surface with rubbing alcohol first.

 

Thanks

 

Just picked up this awesome trailer. I'd say the truck is nearly complete. Mods list below:

Motor/Drivetrain:
- Runnin4tacos Exhaust
- Tk421tuning Overland Tune
- Nitro 5.29 Gears
- Balanced Performance Shaft

Suspension:
- Coachbuilder Ekstrom Front Spacer
- SPC Upper Control arms
- IVD Suspension Stage 9 Suspension
- Camburgracing Racing rear lift shackle
- Timberen rear bump stops
- Total Chaos Diff Drop Spacer

Overland/Other:
- Warn Industries Winch
- Factor 55 Fairlead
- UpTop Overland Bedrack
- Prinsuracks Roof Rack
- Roam Adventure Storage Boxes
- Gofsr High Country 63 Tent
- Huracan Fabrication Tailgate cabinet
- Decked Bed cargo slider and pan
- Center counsel safe and rear seat safes
- Weathertech Floor Matts
- Rago Dash Mount
- 8 Gallon WaterPort

Wheels/Tire/Other:
- Nitto Ridge Grappler 37” tires
- Method Race Wheels 17" wheel
- Coachbuilder Ekstrom rear brake relocate kit

Electrical/Lighting:
- Sierra Wireless
- WeBoost
- PCI Icom Radio
- Race Siren with 200-watt speaker
- Rago Tundra mount
- ARB Dual Onboard air system w/ internal bed hookup
- Ram mount tablet holder with RAM hub for power supply.
- 12v and USB, power ran and installed into the bed of the truck.
- ATAK Android Base Station
- Switch-Pros
- 4 Baja Designs LP 6s
- 2 Baja DesignsXL Sports
- 2 Baja DesignsSquadron Pros
- 4 Baja DesignsS1 camp lights
- 7 Baja Designslinkable kit for light bar
- 2 Baja Designs IR Lights
- 2 Baja Designschase strobe lights
- Alpharexusa Headlights
- Alpharexusa Taillights
- Anytime front and rear camera
- Sharkee Mimo

Body:
- CBI Offroad Hybrid Front Bumper
- CBI Sliders
- CBI front skids
- CBI Rear Bumper
- CBI Full Armor Kit
- Retrax Bed Cover XR Bed Cover w T Slots
- UltraSwing™ Mega-Fit Spare Tire Hitch Mount Rigd
- Tailgate Camera Relocation Kit RiGd
- License Plate Light Kit RiGd Supply
- Bed Molle left and right side with HiLift mount bracket
- CBI Lower Control arm Skids
- Evil Manufacturing 3rd break light with Antenna

 

No wheel spacers? No rubbing?

 

Was this Jason's / Overland Eat's tundra? i swear I've seen it before lol

 

Looks great! Did you have to get a second mortgage to afford all of the Baja Designs lights?

 

50,000 service the other day. Missed the shot by 10 miles. 2 years and 3 months on the road, daily driver.

 

How do you like that jack?

 

It’s killer. I had a Husky before, and it barely got the wheels off the ground. This one, with just a few pumps gets the truck in the air. It’s absolutely worth the cash. Plus my driveway is all rock, so I basically need an off-road jack every time I use one.

 

Finally installed the ARB air compressor using an SDHQ mount. And added some battery termonal covers.

 

omg ... @RustyShackle323 and @Quicksand_Tundra there goes $616 pretty easily, ORDERED. I really like the line-x idea as well. copy & paste

Edit, Go Rhino has a 20% site wide right now "TAX20"
https://www.gorhino.com/

 

What about… *hits blunt* Husky with a PE extension?

 

It was. Snagged it and added a bunch of more things to it. Awesome build.

 

How do you like the Garmin mini 2? I’m looking to pick up a dash cam and can’t decide which one to get.

 

Pretty sweet.…*farts silently* still a real pain to use on my rocky driveway.

 

Just ordered some front and rear glass fenders for the truck one step closer to finishing the LT build part list! I’ll post pics once they arrive

 

I thought mine bit the dust a few weeks ago, but a quick fluid change and some new orings fixed it. I was really looking forward to grabbing a Badland one.

 

Oh nice. I’ll keep that in mind. Plenty of times it’s nice to have two jacks in use.

 

Yes!! Glad I could help. I got mine when RealTruck.com had a nice discount for forum members I think it was around last Christmas. Came out to be ~$400 something! Couldn’t pass up the deal.

 

I’ve been debating getting a set like this to throw up an awning when we drive out on the beach. Those don’t require drilling or leave scuffs/scratches on the paint do they? Assume there is some rubber protection between the bracket and paint?

 

yes everything is rubber coated. I did clean the area and wax the paint before attaching the rack, but it actually has a small contact area for what it is.