What have you done to your 2.5 gen Tundra today?

Installed Vava dash cam with rear camera today.

installed with hard wire kit and used thedashcamstore.com mount for rear camera.

Did drill into the plastic cover on the windshield to have less wires to look at...

 

Installed Rad Rubber Designs replacement splash guards! 15 minute install, OEM fit and yes it’s time for a fender well detail!!! Great product and fitment and came with all necessary plugs/push pins to complete the job!
Eddie over at RRD was responsive when I had a question regarding shipment delay due to COVID as well. 2 thumbs up!!!

 

A few months ago I got Husky X-Act contours for the front of my 18 tundra and they fit great. So, I ordered the full coverage back mats and and their ultra fiber bed mat last week and installed them today. Its like they came from a different company. The rear full coverage mat seems like its a shitty knock off. It doesnt look anything like the front mats, both material and pattern. It fits terrible too. Its about three inches too wide.

The ultra fiber bed mat showed up absolutely hammered. There are multiple places it is torn along the side and the velcro they provided to install with is completely useless. Should have stuck with Bed Bug. Buyer beware.

 

Sumosprings installed

 

How was the install? How long? Tough to loosen bolts?

 

You can trim the line-x out of the holes with an exacto knife and then thread your bolts to make sure they are cleaned out enough to install your rails. Just go slow and watch the fingers.

 

I'm interested to hear how you like that much deadening. I've had people call me on the phone while driving and ask if I was on a Harley because of the cabin noise. I ordered 80 sq ft from Amazon and hoping to start on the doors first and the cabin once I have time.

 

I too have been waiting. This is a sign mine should be here this week.

Looks good. I'm gonna detail my wheel wells when I install mine

 

Went to my buddies shop today, best gunsmith in Cypress Texas....fixed my SDHQ terminals that had issues with yesterday, made a shim, machined a few washers and made some spacers for the stereo fuse from a gun barrel....looks and works great....

 

Had some fun today.

 

I think I ordered 36sqft boxes from Amazon and went through ~1.25 boxes for the floor, back wall, and 2 sheets on the roof. I think I ordered 3 boxes to make sure I had enough for the whole truck (guesstimated, not actually measured), I'll probably go through less than another box for the doors. Prior to deciding on the Thinsulate, I had also ordered 150mil CCF (to allow MLV to be laid over), so I have a ton of that just sitting around now

 

Finished the Raptor liner on my Rough Country DIY bumper today. Install to come in a week or so.

 

Is there enough clearance on the back wall for foam? I got 50 mil.for the doors but was thinking 80 mil or some foam

 

At least on my DC there is all the room in the world on the back wall. I could have done 2-3 layers of 80 mil CLD, 150 mil CCF, and probably 1" of Thinsulate and it wouldn't compress anything except the very top bit of thinsulate on the seat back... Now that you mention it, I do have extra thinsulate, so I may do another layer of it back there

 

Finally got to wash the truck and had my middle daughter help me a bit

 

Thats cute! They are fun at that age.

 

Very easy and fast.. took about 10 minutes.. just have a breaker bar and impact drill and you’re good.

 

@Fotnot Teach them young! She might need a step stool though. Ha

 

Very cute.

 

Just hit 600 miles on the Tundra and installed the TRD Rear Sway Bar. Fairly easy install, well with 2 people. Excited for the salt roads to melt and see how much better the truck handles!

Also removed the spare tire so it doesn't get trashed, lightened the truck up, +2MPG improvement

 

I have a 4yo, 2yo, and 7mo old. They're a blast. We live in the country and have pics of my oldest as a almost 2yo naked helping me wash vehicles. Trying to keep photos to embarrass them enough to not bring boys over lol

They love to help. Hell man....I prob need a step stool. 6" lift and 35s while I stand st 5'-8" haha

Thnx man

 

Perfect height for cleaning wheels

 

She is a cutie!!

 

Great setup, I'm curious about this as well. I'll be coming off 35x12.5r17 pitbull Rockers which are over 35" and weigh a ton. I'd love to throw on some 37s, possibly even same tire but I hesitate since I have no plans to regear. Pls pm me too and lmk what you think after some miles. I'm guessing in another 5k miles I'm gonna need some new shoes.

 

Finally got the system in and finished. Fronts are arc audio x2 components, rears are jl audio c2 650 components, x2 arc audio 1200.6 amp, 2 8 inch focal subs and jl audio cleansweep. Happy with the set up so far.

 

You take that cover off to make the mod?

 

if the seller doesn't help you out shoot us an email: info@chaosfab.com

 

After 3 damaged grilles from another vendor I ordered this one from Lewis Toyota and it arrived undamaged. Chrome delete is almost complete.

 

The finishing touch to the de-chroming: a tri-color badge.
Then banished her back to the tent since i’m on call and driving my work truck. But at least she isnt getting salted up.

 

Man, those were great bumpers. Sure wish someone would pick up the design...