Tundra is finally here!! Let’s the mods begin

welcome to the neighborhood, nice truck

 

im powercoating the stock 20's black. selling the factory tires. yes its a roll up. and it quick disconnects so u can remove it.

my old tundra had a broke coil spring so i ordered the ome struts with the heavy duty coils the extra 200lbs ones cuz i also plow with it. and i decided to trade the truck in so might as well put them in the new truck. i dont remeber the part number sorry

i think 33's would be fine with out rear gearing. if you have the money. just regear it. i really want to regear but might be little later down the road. i had 35's on my 2010 and never re geared but hated the power loss and always downshifting on the highway. everyone raves about regearing and it makes sense.

 

Lift and tires going on tomorrow. Sneak peak of the wheels.

 

Are those the stocks powdercoated? Looks good will look even better with the mts on em! I like how you have them in the seat make sure you put the seatbelts on your new babys so they dont get scratched when u hit the brakes lol
You should ask a mod

 

Ya they are the stock 20’s. I had the camry today with 2 car seats in the back. So 2 in the trunk and one on the floor and 1 on the seat lol. Had to make it happen.

 

Oops didnt finish my post. I ment you should ask a mod to move this to the build page so ppl can find it easier if there looking to see if you have a build..

 

Anyone no a mods username so I can tag them?

 

@T-Rex266 @ColoradoTJ @Pinay
That's all I can think of also not sure if there mods or staff but they can help

 

You can also use the Chat with Staff feature.

What’s up??

 

Wondering if I can move this thread to the build section.

 

Yes, that can be done. Did you want to have the welcomes removed when its moved or maybe just start over on your build page? Up to you.

 

Welcome aboard fro E. WA

 

just moved is fine thank you

 

Everyone I need help. Running stock wheels. And tires are just about running on upper control arms. I don’t want spacers. Does anyone know if upper control arms give me more clearance to the tire? I’ve tried searching and googling and can’t find anyone that did that. I’m fine with buying control arms if I need to. But not if they don’t give me any extra room. Please help anyone. @Getmeacoors your thoughts. Attached picture for reference. Not my picture.

 

Here’s some almost done pics. Have to finish in the morning.

 

Dang I didnt even think that the stocks with mts would hit. I feel like I've seen people run mts on stock.. Are they close or rubbing? I ran into this problem with my Tacoma and just got different rims but you just spent money on powder coat.. I think some UCA do offer a small amount of space but I would hate to recommend it and it not work. Spacers may be your only only fool proof option. Wish I could help more but when my stuff doesnt fit I go bigger wider or get the grinder and a hammer..

 

I mean I barley had room on my rock warrior but never rubbed. There is less room with these. But they don’t rub. But I don’t feel safe doing it

 

If they arnt rubbing give it a few days flex the suspension a few times then check for any rub if its barely touching mabe new UCA or slight alignment adjustment?
I believe rock warrior wheels are different offset further away from uca

 

Welcome!

 

Gots tail lights done and bed decals replaced. Spacers just showed up so tires will on and done Monday!!

 

Oh nice you did the exact opposite with your tailights as I did. Looks good. Are you going to try and run the wheels without spacers or just going to run them anyways? I like the look of a wider stance anyways

 

Going to run the spacers. I have my buddy’s winter wheels on now till they get installed. Going to pick up a side by side today so needed the truck this weekend. Hopefully dont have much rubbing on inner fenders with spacers.

 

Got the spidertrax spacers on. And everything is good. Moved the inner fender forward a bit so tires don’t rub. No rubbing at all. Very damn close to body mount and inner fender but doesn’t hit. Just debadged it tonight. Still waiting for headers to come in. And then trd exhaust will go on at same time.

 

Got the headers finally. Just dropped the b pipes and trd cat back off to get ceramic coated. Worse news is I bent a valve in the xrunner so that’s down and engine is gotta be pulled. So that’s next on the list. Havnt been on here much due to that.

 

Went for a cruise today with xrunner buddy’s. Took the tundra. Tons of leaf peepers out about in the white mountains.

 

What plow setup are you running? I looked at Snowdogg B/C I can get a smoking deal on one but I hate how low the frame mount hangs.....

 

Fisher ht. It’s off my 2010. Waiting for headlight harness for the 2019 tho...

 

nice setup

 

This thing is clean!

 

Ok a little update. Been a while. Got Doug thorley long tubes on with trd cat back. Had it all ceramic coated. Had to cut up the Doug thorley b pipes. Not made for 38 gallon gas tank. Sucked but got it done. Sounds great. Love it.