TRD Pro Wheel Well Camo Trim

what wheel and tire setup do you have and how much does the fender cover

 

I went ahead and ordered just this piece. Looking at that diagram I feel pretty confident that is the piece we are looking for. I did order the lights assembly too. I will update when the parts arrive.

The whole assembly is over 2k because it includes the rear camera that is 1k by itself.

 

And this will include the lights, correct? If yes, will they easily connect to existing wiring or will you need to splice into a source?

 

Nice improvement! Waiting for mine to arrive the dealership....I thought there a few screws in addition to the snap pieces?

 

18 tis rims w 35 toyo at. I think the rims are-18 which gave me @ 2 inch poke. I'd say it covers roughly all but maybe 1/2 inch. It's a lot wider than stock . Especially appearance wise.

 

Thank you...I honestly didn't like the truck until now. At least not in white. It changes the whole look. Wheels tires and fenders. Well....and grill. Lol
There are i believe 5 bolts. 10mm. Really easy. I did it in the dark after work in the driveway. 4 minutes a fender.

 

Wiring?

 

Got the call today that my flares are ready for pickup..tomorrow will be a good day..

 

Please keep us updated..interested in that piece too...it expensive tho..lol

 

is there a part number for the front and rear bumper camo parts?

 

it was only $445 for the trim and the three marker lights were $340. Better than 2k. Hopefully it’s all I need.

 

Prohit....would you please provide part numbers for the two pieces u ordered.. my dealer parts depart is playing games...

 

I also ordered the matte black handle since I have a platinum and my handle was the shiny black.

Tailgate molding Part # 76085-0C060
Marker Lights Part # 81005-0C010
Handle Part # 76810-0C041

 

Thanks alot...when are you expecting yours to come? I'd like to know if it works before ordering..

 

update:

The light assembly is not available at the moment so they canceled that item. The trim piece should be here by Monday.

 

Curious, how long from ordering them online (assuming from your dealer) to having them at the dealer for pickup? I ordered mine on the 16th and the status hasn't changed (aside from "Received", as in order received). I guess I will give it until tomorrow and call the parts department.

 

3-5 days..I ordered in person

Btw..there is no pre-wiring for the lights..I'm trying to source a connect to plug into and run power ton the fender lights..if no oe connectors can be found I'll just solder wires the llights.i have one side installed.but didnt have time to take pics..was really easy install..

 

I'm open to selling mine as I plan on getting flared fenders eventually. would anyone be interested in buying mine?

 

I got the wiring figured out.



Here is a picture with the part number to the individual light. Unfortunately searching online yields nothing.

 

I can confirm these are the same lights for the grill. If you look at the diagram you can see each light has the same screw wings that mount to that bracket.

 

Nice, did you figure out where they wire into as well? I thought some of the wiring for the lights are CANbus on the Tundras.

 

I have them wired up to an ignition on fuse.

 

Are you talking about selling your Pro fender flares?

 

got the tailgate trim today. Unfortunately it doesn’t come with the lights like the flares.

 

Not this part but do you know if the tailgate handle has camo print?

 

Hi Prohit, can you show us a picture of the trim?
Thanks,
-curtis

 

So have you guys figured the final part numbers? I was reading that someone had 2 of the same side. Anyone installed them on a celestial silver platinum yet. I have a +0et and I think the thicker fender flares would look perfect. Thanks

 

The part numbers listed earlier in the thread are the correct part numbers. I was the guy that received 2 "left" rear fenders even though the box had a different part number (for the right rear fender). The challenge now is finding the correct OEM female plug for the marker lights OR build a DIY version

 

I was wondering, do your fenders have any holes for the fender flare mounting? I have an SR which is fenderless and love the idea of installing these. I just want to make sure they’re bolt on without any additional holes having to be drilled (except maybe for the wiring on the fender lights)

 

You might be slightly confused. The flares in this thread are for the new 2022+ 3rd gen trucks, and your profile lists a 2011, so they would not be compatible. Or do you have a 3rd Gen truck as well as your 2011?