Transmission Cooler Mounting Bracket - Setrab Series 9 - 20 Row

I have a transmission cooler mounting bracket that was made the fit the 2.5 gen trucks and should fit the 2nd gen models as well. It’s a bracket designed by Pman9003 to fit a Setrab Series 9 - 20 row cooler. It uses these Setrab mounting brackets, you will need (4) brackets which I believe is two sets: 23-MPSTD-UB1-9.


I had this plasma cut out of 11ga steel when I had other items cut. A friend wanted one but is now changing the direction he’s going. It uses factory threaded holes and has a mounting point for the horn that gets moved.


I can include the following stainless hardware: top and bottom mount bolts, washers, horn relocating hardware, and a spacer for the top bolt. I have not bolted this up myself, others have mentioned getting them made and didn’t not any issues.

https://www.tundras.com/threads/transmission-cooler-bracket.136129/page-3#post-3572837

SOLD


Note: I may have a bracket or two left for the series 9 - 15 row Setrab cooler, PM if you’re interested. I had a few extra cut when I made mine and will not be getting anymore cut.

 

PM’d.

 

The series 9 - 20 row bracket is sold. If anyone is interested in a Series 9 - 15 row bracket send me a PM.

 

PM sent on the 15-row cooler bracket...

 

I have one 15 row bracket left, I’m not getting any more cut. It’s raw steel, will meet painted or powder coated.