1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tire rub issue with 285/60/20

Discussion in 'Wheels & Tires' started by Jay-U, Feb 21, 2016.

  1. Feb 21, 2016 at 4:08 AM
    #1
    Jay-U

    Jay-U [OP] New Member

    Joined:
    Feb 14, 2016
    Member:
    #2679
    Messages:
    2
    Gender:
    Male
    Hello. I am Jay2theU from So Cal. I just purchased and installed -12mm offset 20x10 Fuel Throttle wheels and Nitto exo grappler all terrain 285/60/20 on my 2014 Tundra limited with TRD package and spacer in front. I am not an off-road enthusiast yet but want to take my truck out for adventurous trail rides in the future. However, going with the aggressive look, My front tires are rubbing against the bumper (minor) and back wheel well and the frame. Americas tires advised me to trim the bumper and cut small portion of plastic well and to hammered down the frame to make it smoother with no sharp edges. This was the most inexpensive option and live with minor rubbing when I make full turns. I am still not sure if I should lift the truck for more clearance or do a frame modification specified here in this website: http://www.off-road.com/trucks-4x4/project/fixing-tire-rub-from-large-offroad-tires-53862.html

    Any recommendation from Tundra experts are appreciated. If lifts are recommended, please give some reputable brand suggestions.
     
  2. Feb 21, 2016 at 5:04 AM
    #2
    mdavis

    mdavis Tiger Life

    Joined:
    Feb 13, 2015
    Member:
    #966
    Messages:
    2,265
    Gender:
    Male
    First Name:
    Michael
    Rock Hill, SC
    Vehicle:
    2015 Tundra SR5, 5.7, 4X4
    Tow Mirrors, 275/60R20 Toyo AT2's
    Welcome to the site!
     
  3. Feb 21, 2016 at 6:06 AM
    #3
    Virgils12

    Virgils12 New Member

    Joined:
    Dec 21, 2014
    Member:
    #816
    Messages:
    926
    Gender:
    Male
    Vehicle:
    2012
    Camburg Fox factory 2.5" lift Xd monsters with 295/70/18 nitto terra graplerrs Corsa cat back Weather tech liners Wet okole covers
    If your close to them I would have them do the cmc for you. If you can do the job yourself @Relentless fab on this site can hook you up with the plates. If you would have went with less offset on your wheels you probably won't have any issues.
     
To Top