1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Speedomter lense replace

Discussion in '1st Gen Tundras (2000-2006)' started by RR60, Mar 18, 2017.

  1. Mar 18, 2017 at 4:23 PM
    #1
    RR60

    RR60 [OP] New Member

    Joined:
    Feb 10, 2017
    Member:
    #6290
    Messages:
    312
    Vehicle:
    2003 SR5 Tundra long bed
    Anyone replaced just the plastic clear lens. Does it just snap on or easy to figure out once you get the bezel off.

    Thanks
     
  2. Mar 21, 2017 at 12:43 PM
    #2
    mtntop

    mtntop New Member

    Joined:
    Jul 14, 2015
    Member:
    #1521
    Messages:
    363
    Gender:
    Male
    Colorado
    Vehicle:
    2004 4x4 Access Cab SR5
    I have, (2004 access cab), there are 4 screws holding it in and then you need to pull the whole assembly out and unsnap the electronic connections behind the speedo and the plastic retainers around the edge of the speedo. The new lens can be replaced then. The cheapest I found new was $68!
     
    RR60[OP] likes this.

Products Discussed in

To Top