1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

SPC UCA Track Width

Discussion in 'Suspension' started by rbros, May 4, 2021.

  1. May 4, 2021 at 8:43 AM

    rbros [OP] New Member

    Dec 19, 2020
    2021 White Limited TRD
    Noticed the other day while washing the truck that the front track width was narrower than the rear. Looked at my old pictures with the factory uca confirmed this as well as measuring against the rear width. Looked at the ball joints and it appears they just moved them inward to adjust camber when doing the alignment. Are most guys running them all the way out towards the tire? These are about .5" inward, maybe more. Tempted to either swamp them out for a fixed ball joint style or move them out and tell the alignment tech not to touch them.

Products Discussed in

To Top