Show your Tonneau cover

Which model is this plz

 

Rugged Liner Rugged Cover E-Series EH-TUN5514

 

Undercover Elite LX. Painted to match from the factory. Very easy installation and just as easy to take off if you need to haul something in the bed. Only weighs 70lbs.

Keeps your bed nice and dry. I've been in some driving rain for hours and it has yet to leak.

 

Finished installing a "UnderCover Ultra Flex about an hour ago ... mounts to the factory cargo rail system ... cannot use the factory tie-downs ... so far, so good ...

 

So I put this on a few weeks ago and have had a chance to get use out of it before posting more feedback.

The Truxedo Pro X15/ So far am loving it other than the initial frustrations on the install due to the thickness of the OEM spray in liner. Shimmed it up a bit to change the angle of the rails and it definitely helped. I like the stiffness due to the HD material. I like that it rolls up fully behind the cab and doesn't interfere with the cargo space. Going to look into bedrail mounted carrier options to install next. The swing out boxes are great and I have them keyed alike for both the padlocks and both of the top lids. The rubber mat adds a nice non-slide component to the bed.

 

I absolutely love mine too. I had a guy ask me to s of questions in traffic about it... when I told him to look at it and I opened it from the key fob it blew his mind lol. Pretty damn sure he went to 4wheelparts and ordered one shortly after

 

What kind of antenna is that? I love it.

 

Rugged Cover II... Was posted wrong on CLs as an UnderCover Flex. Drove 4 hours to buy it at a deal. Got there to find a big disappointment. Guy said, "Take it. Sorry you drove so far. Not taking this back to my garage."

I have to say, I love this cover...

 

Got rid of the leaky Extang 2.0 and got the new SnugTop installed today. Great color match. Very happy with the look and quality.

 

Just got my Access Toolbox Edition cover installed the other night. Haven't had a chance to water test it yet but it passed the light test. Seems to be keeping out the light amount of snow we got overnight. Great fit and finish. I'm happy. What I want to know....is when is a manufacturer going to get the wild idea that most of us like bed covers and build in a provision for a waterproof factory cover similar to a Truck Covers USA/ Roll-n-Lock where is has the roll tracks built into the bed rails and provisions for mounting the canister? If you don't want to use those rails for a roll type cover, the track could be used to mount additional rails for a soft cover. Seems like a good idea no?

 

The Extang 2.0 has hardware to work with a rail system. Just make sure the one you order is marked as such

 

My wife was going to get this for me for my birthday next week. Your post has made my decision not to get it. What good is a truck bed cover if I can't haul my dirt bikes in it?

 

Happy birthday. Where do you live? Maybe view other members trucks in person?

 

Truxedo Pro X15.
​

 

Those diamondbacks look awesome! Drooling!

 

I love mine!

 

This the Extang 2.0 Hard Cover

 

Anyone resprayed third cover black? How did it go and what spray did you use.

 

How does this do keeping the water out of the bed?

 

My 2.0 leaked and I got rid of it.

 

Seems like a hit or a miss on the extang 2.0. Some say they leak and other says it doesn’t. ‍♂️

 

Mine did not at all.

 

I just installed the same Rugged Cover as you. Was your tailgate kind of hard to open when you first put yours on? Maybe the gasket where your tailgate closes has to break in?

 

Yes and it's still kind of tight, which I am ok with it. Seems to make a better seal. Been a good cover.

 

The reason they ask that question is the mounting brackets are different depending on whether you have the rail system. I bought one used which was used on a truck with the deck rail system. To use the cover on my truck without the rails, I contacted Undercover and ordered the other brackets for about 50.00. The cover is exactly the same, just the brackets are different. As a matter of fact, I still have the brackets for mounting to the rail system.

 

Been looking hard at the MX4... those that have the extang solid fold 2.0 or the Rugged Cover (they look exactly identical and since Truck Hero owns them all, i wouldnt be suprised if they were the same.) I see where folks say it leaked and other say it didn't.. i think it all comes down to how tight you install it.

that said.. if you have the extang or rugged cover.. and still have it.. how do you like it? I liked the MX4, but the rugged cover price is not bad at all.

 

Backflip mx4 with deck rails( included brackets for rails) installed 2 weekends ago.

 

Liking mine as well

 

I like the ultra flex...I really wonder if you could get your own brackets to lower the deck rail system like the mx4 so you don't lose that functionality. That is what keeps me coming back to the MX4. I just keep reading so many negative things about the MX4 that is has me spooked.