1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

powering up fog lights

Discussion in 'Lighting' started by Mongoose75, Nov 22, 2020.

  1. Nov 22, 2020 at 6:14 PM
    #1
    Mongoose75

    Mongoose75 [OP] New Member

    Joined:
    Nov 19, 2020
    Member:
    #55085
    Messages:
    2
    Gender:
    Male
    First Name:
    Radel
    Vehicle:
    2003 Tundra v6
    none
    I am having difficulty installing 2013 Tundra, V6, double cab. I bought and installed a relay for the the fuse box, fuse is in the fuse box, and followed the instructions via youtube. connect to light blue wire in harness under dash, and second to connection to green wire in module to the left of the first wire, and ground wire. connected switch, but no power (Hollander fog light). the lights were a gift and came with no installation instructions and no dedicated wed site. There is a separate harness wiring but it appeared to be for a non prewired setup. Mine has the connectors at the light location, a relay slot in the fuse box and a fuse. Do I still need to direct connect to the battery and use their light connectors or am I tapping into the wrong wire?
     

Products Discussed in

To Top