Post your Method 701s! 17” and 18”

no spacer needed, that's a stock size tire, you will have plenty of room.

 

No you would not need spacers with the 18" 701's. I believe they are plus 25 which is a good offset to go with. No spacers needed. Post some pics when you get them on.

 

Method 701's

 

I finally got 50 messages.

 

Just not sure what finish to go with. I have a black 2020 limited. Would it look better with the bronze or matte black.

 

Congrats, I’m on my way to 50 now

 

Cant lose with either finish. Both will look great!

 

Looking for some feedback.

Currently have a 3/1 lift on 33s with stock 18s.

Looking at 701s with 35s. Is there a recommended width? Will a BMC be needed?


Thanks!

 

You should be ok if you stick with the plus 25 18's. I ran 35's for a while on 0 offset 17's and mine rubbed the mount slightly.

 

What would be the largest tire size I could go with if I wanted to go bigger than a 275/65/18? I probably couldn’t go too much bigger since I only have a 1.5 lift up front.

 

Whats the offset on the 17? 17x9 or 17x8.5 thanks!

 

701s r18

 

zero offset

 

Factory spindle? Hows the tie rod clearance and brake caliper clearance? Thanks!

 

Welded spindle and long travel with an Alcon big brake kit. No clearance issues.

 

No, the +25 offset is gtg.

 

Yo yo fellas. Can anyone give me side shot with the 18” +25 offset? I had some gnarly offsets on my Tacoma and don’t feel like hassling, but never say never. Looking to get some 35x12.5x18 falken rt01’s to go with these on my stock trd pro. Thanks.

 

lots of pictures on my build page. bronze 701s 18 with 295s and with 37s

 

Thanks bruv. Even the color I’m getting. Bonus +25 will be easier to deal with if LT comes into play thanks.

 

https://www.tundras.com/threads/sage63-21-limited-trd-offroad-4x4-cm-super-white.100607/

Thought I had more pictures of the stance. I will post some here tomorrow (Sat)

 

Thanks dude.

 

Huzzah 18’s
35/12.5
Falken RTO1’s

 

Looks great!