1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

No Going Back - High Clearance Rear

Discussion in '3rd Gen Tundras (2014+)' started by matictundra, Dec 10, 2019.

  1. Dec 10, 2019 at 8:39 PM
    #1
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    I trimmed the rear fenders and started modding the stock rear bumper frame / receiver hitch to locate the receiver higher and behind a flip up plate.

    3FEAD0F5-7713-4941-A77D-825A4DE51850.jpg
    064EE37C-3703-442C-ABD0-D04C144539B5.jpg
    9C886E13-7412-4AAD-8AEB-3843DBDAE7F2.jpg
    0DCEA8BC-89F3-4BA9-8A78-9B3D7FBB7BDD.jpg
    3109171F-7FA0-42B3-84F4-2F63BD7F1C0D.jpg
    642814B9-BD7C-4801-9B63-4E713DA25992.jpg
    E57FC39C-28A1-4DF4-8C96-4A7D2FE77472.jpg
    F571DEF2-0630-4F05-B51C-A73E3AA29C0E.jpg
    2C6CF980-4E10-47A3-91EE-139EA25FD90A.jpg
    6779B434-B0C9-4305-ABA9-F59BF09CAC5C.jpg
     
    Inquiringone, Rica25, drobb and 21 others like this.
  2. Dec 10, 2019 at 8:46 PM
    #2
    Hbjeff

    Hbjeff New Member

    Joined:
    Jan 20, 2019
    Member:
    #24845
    Messages:
    2,338
    Gender:
    Male
    Huntington Beach
    Vehicle:
    2010 DC tundra lame-o 2wd
    I like it. I’d cut some more even, looks mean
     
  3. Dec 10, 2019 at 9:49 PM
    #3
    TransNone13

    TransNone13 New Member

    Joined:
    Oct 2, 2019
    Member:
    #36893
    Messages:
    164
    Subbed, looking forward to the finished product.
     
    Inquiringone and 619Tundra like this.
  4. Dec 10, 2019 at 10:08 PM
    #4
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    10,300
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Looks like you were able to just grind the ends of the 3" tube and rotate it? I need to get a hitch back on my truck, was taken off when I went spring under.
     
    joonbug likes this.
  5. Dec 11, 2019 at 3:13 AM
    #5
    rockmup

    rockmup New Member

    Joined:
    Oct 19, 2019
    Member:
    #37565
    Messages:
    248
    Gender:
    Male
    First Name:
    Todd
    Greenwell Springs LA.
    Good job ! Really glad to see someone else chopping things up.

    I think I'm going to cut mine a little higher, make a couple of pie cuts and move the area where your tape is up to the black lines I added to your pic.

    642814B9-BD7C-4801-9B63-4E713DA25992.jpg
     
  6. Dec 11, 2019 at 7:58 AM
    #6
    gosolo

    gosolo “The .com stands for communist”, Dale Gribble

    Joined:
    Nov 5, 2015
    Member:
    #2064
    Messages:
    3,824
    Gender:
    Male
    First Name:
    Ray
    NW Oregon
    Vehicle:
    2015 DC Super Fine Super White Pro
    2"CB shackles, bushings and 1 shim, lockerdown console vault, rear folding seat back mod, snugtop shell with opening side windows, 46g fuel tank, SDHQ sliders and hidden winch, Decked Drawers, Icon leaf spring packs and got rid of the interior chrome
    Good looking work!
    Please post more pictures when you get the modified hitch back on.
     
  7. Dec 11, 2019 at 8:09 AM
    #7
    scpete24

    scpete24 Dude

    Joined:
    Feb 15, 2017
    Member:
    #6387
    Messages:
    513
    Gender:
    Male
    Orange County, CA
    Vehicle:
    2016 TRD Pro Super White
    Nice, looks good! Cutting for high clearance, but you have a rear sway bar?
     
  8. Dec 11, 2019 at 8:10 AM
    #8
    COMiamiFan

    COMiamiFan SSEM #3. Don't forget to try the search bar.

    Joined:
    Nov 26, 2015
    Member:
    #2160
    Messages:
    25,277
    Gender:
    Male
    First Name:
    Jose
    Parker, CO
    Vehicle:
    2016 White Crew Max TRD
    TRD Pro Grille, ESP Storage, Tailgate Inserts, Line-X Bedliner, Weathertech Floorliners, Wet Okole Seat Covers, 5" Shorty Antenna, Mickey Thompson MM-366 Wheels, ToyTec Boss, 35" BFG KO2 to name a few.
  9. Dec 11, 2019 at 8:11 AM
    #9
    fisherman951

    fisherman951 LT dreams ....

    Joined:
    Sep 12, 2017
    Member:
    #9616
    Messages:
    3,843
    Gender:
    Male
    First Name:
    Tony
    Riverside
    Vehicle:
    2017 crewmax 4x4
    Maybe he removes it for wheeling?
     
  10. Dec 11, 2019 at 8:24 AM
    #10
    Spvrtan

    Spvrtan Mod In Training | MIT

    Joined:
    Apr 2, 2015
    Member:
    #1140
    Messages:
    1,595
    Gender:
    Male
    First Name:
    Kris
    San Diego, CA
    Vehicle:
    Black '14 CM SR5 w/ SC; 40s on 17s; 4.88s
    Rica25, drobb, chugs and 1 other person like this.
  11. Dec 11, 2019 at 8:37 AM
    #11
    scpete24

    scpete24 Dude

    Joined:
    Feb 15, 2017
    Member:
    #6387
    Messages:
    513
    Gender:
    Male
    Orange County, CA
    Vehicle:
    2016 TRD Pro Super White
    He must, seems counter productive to trim for high clearance off road but keep the sway bar. Would think he would just remove altogether
     
  12. Dec 11, 2019 at 9:21 AM
    #12
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    I like taking corners fast and sway bar helps a lot. I also drive a lot on the highway and helps in emergency lane change speaking from experience. I don't go xtreme wheeling...I'm more like medium wheeling. But I know better departure angle helps due to long wheel base and tundra's big ass. I still get decent articulation when wheeling.
     
    15whtrd, tundra_20 and scpete24 like this.
  13. Dec 11, 2019 at 9:50 AM
    #13
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    On the driver side if you cut higher, the shock dampener for lowering the tailgate will be exposed. If you look at my picture closely, you can see it. I actually almost hit it. I actually ended up opening the tailgate to lift it up out of the when I was cutting.
     
    Sunnier, tundra_20 and rockmup like this.
  14. Dec 11, 2019 at 9:53 AM
    #14
    TXRailRoads73

    TXRailRoads73 CRÜE

    Joined:
    May 30, 2016
    Member:
    #3487
    Messages:
    45,472
    Gender:
    Male
    First Name:
    Adam
    RGV, TEXAS
     
    TimberToy20, van, YotaMan and 2 others like this.
  15. Dec 11, 2019 at 10:46 AM
    #15
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    10,733
    Gender:
    Male
    SoCal
    Vehicle:
    2012
    looks good. tag for outcome.
     
    matictundra [OP] likes this.
  16. Dec 11, 2019 at 10:51 AM
    #16
    scpete24

    scpete24 Dude

    Joined:
    Feb 15, 2017
    Member:
    #6387
    Messages:
    513
    Gender:
    Male
    Orange County, CA
    Vehicle:
    2016 TRD Pro Super White
    I was thinking you were going LT with the 37's and was thrown off with the sway bar most hard core wheelers ditch the second they can. I've heard the sway bar helps a ton for daily driving, but I have never driven or ridin in a 3rd gen with one installed. Either way, badass your cutting and raising the hitch, gonna look good!
     
    tundra_20 and matictundra [OP] like this.
  17. Dec 11, 2019 at 7:38 PM
    #17
    WestexSBK

    WestexSBK New Member

    Joined:
    Feb 22, 2018
    Member:
    #13072
    Messages:
    303
    Gender:
    Male
    Vehicle:
    2014 Tundra
    Tagging in. Are you adding a replacement bumper or leaving it off?
     
  18. Dec 11, 2019 at 8:45 PM
    #18
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    Making my own designed high clearance bumper.
     
    WestexSBK and rockmup like this.
  19. Dec 12, 2019 at 2:17 PM
    #19
    WestexSBK

    WestexSBK New Member

    Joined:
    Feb 22, 2018
    Member:
    #13072
    Messages:
    303
    Gender:
    Male
    Vehicle:
    2014 Tundra
    Looking forward to seeing it. I’d like to do the same

     
    matictundra [OP] likes this.
  20. Jan 14, 2020 at 6:48 PM
    #20
    WestexSBK

    WestexSBK New Member

    Joined:
    Feb 22, 2018
    Member:
    #13072
    Messages:
    303
    Gender:
    Male
    Vehicle:
    2014 Tundra
    Any updates?
     
  21. Jan 14, 2020 at 7:29 PM
    #21
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    I got the the bumper frame / receiver done right before Xmas week.

    2812A5E1-DBFC-4EE0-8FF1-3F53837DD3B7.jpg
    9EC906A8-AF55-4DCD-AF1A-B7ACF78F6954.jpg
    EC672E8B-00CF-486B-B85A-AA0A189C3734.jpg
    59F7F9B9-1644-4357-AA32-6F1CE9E960FD.jpg
     
    Rica25, Mountun Goat and gosolo like this.
  22. Jan 14, 2020 at 7:31 PM
    #22
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    This is my designed high clearance rear bumper but overextended myself during the holidays.

    666FF738-B7B0-45B4-B2C8-4865052B105C.jpg
     
    Porschetech29, saybng, Rica25 and 8 others like this.
  23. Jan 14, 2020 at 7:36 PM
    #23
    WestexSBK

    WestexSBK New Member

    Joined:
    Feb 22, 2018
    Member:
    #13072
    Messages:
    303
    Gender:
    Male
    Vehicle:
    2014 Tundra
    Hell yeah. Can’t wait to see it
     
    Rica25 likes this.
  24. Jan 14, 2020 at 7:36 PM
    #24
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    Until I save some money, I made a temporary hitch mounted plate with plug n play lights via soldering directly to the lamp socket, potting it close and shrink sleeving to keep the cops happy.

    37024E05-D682-4C9D-9EA0-D3693A3C9BD4.jpg
    E958F0A4-CF69-480B-BCFE-BF3243407EEC.jpg
    EFFF6D7D-4C4B-48CA-BC14-95570A3BD18E.jpg
    CC79C143-6DEE-400D-A458-8D074B13A489.jpg
    F18C9850-7285-4E4C-A5F4-37280251B991.jpg
    DA4709D4-2674-4EEA-A767-16401B46C259.jpg
    B99696FE-6D25-4246-B21E-75B9BFCB0FCC.jpg
     
    Last edited: Jan 14, 2020
  25. Jan 14, 2020 at 8:28 PM
    #25
    Mountun Goat

    Mountun Goat Pretty ugly, yet completely effective

    Joined:
    Feb 19, 2018
    Member:
    #13002
    Messages:
    4,789
    Gender:
    Male
    First Name:
    Dan
    Hinton Alberta, Canada
    Vehicle:
    Oh8 Limited DC Bush Beater!
    Pretty legit bud
    Looking rad so far! Nice work :popcorn: you got me hooked
     
    Rica25 and matictundra [OP] like this.
  26. Jan 14, 2020 at 8:55 PM
    #26
    Youngfrankenstein

    Youngfrankenstein New Member

    Joined:
    Jun 29, 2015
    Member:
    #1465
    Messages:
    117
    Gender:
    Male
    Vehicle:
    2015 4x4 CM SR5
    Amazingly skillful craftsmanship! Wow!
     
  27. Jan 14, 2020 at 9:38 PM
    #27
    cook2kill

    cook2kill PNW

    Joined:
    Jan 19, 2019
    Member:
    #24774
    Messages:
    178
    Gender:
    Male
    First Name:
    John
    Portland OR
    Vehicle:
    2018 CM
    Damn I need to learn to weld. That’s awesome work so far. Can’t wait to see the next update.
     
    Mountun Goat and Rica25 like this.
  28. Jan 14, 2020 at 9:47 PM
    #28
    matictundra

    matictundra [OP] New Member

    Joined:
    Jul 20, 2017
    Member:
    #8654
    Messages:
    365
    Gender:
    Male
    First Name:
    Franco
    AZ
    Vehicle:
    2017 Red Tundra SR5 4x4 CM
    3"/1.5" Lift (6112 w/ CB Shims and JBA UCA's, and 5160 w/ Toytec Shackles) Front and Rear TRD Sway Bars Nitto Ridge Grappler 37x12.5R20 w/ Blk 20x9 +20mm Fuel Vector Wheels AFE Dry Filter with TRD Flow Acc Dirty Deed No Muffler Exhaust Nitro 5.29 Gears RCI Engine, Trany/Trans-Case and Fuel Skid Plates Relocated Rear Diff Breather | Rear Brake Line Extension Jomax ABS Sensor Armor Colored Matched Front Bulge and TRD Pro Grill Assy Modded ADD Stealth Fighter Front Bumper High ClearanceRear Bumper with Modded Tow Receiver Behind Plate and Chopped Rear Fender Spyder Headlights (LED Hikari Bulb + Re-wired LED bar as DRL) | BD 40" ARC AMB/WHT DC OnX6 BD 10" Onx6 in the Grill (2X) Rago Low-Profile Ditch and Extended Brkt with Daul BD Squadron Pros - AMB & WHT AMB LED Chase Light (Cargo) | Dual BD Squadron Sports in Rear Bumper Prinsu Roof Rack with a Pair of BD S1 For the Sides and Rear Switch Pros SP-9100 with Custom Switch Mount, Custom Engine and Roof Terminal Junction Boxes 12K Lbs Smittybilt Winch with Factor 55 FlatLink E Amp Power Step EVO-One Remote Start Limo Tint (All Around) | De-Badged LED Interior lights with Front / Rear Interior Footwell LED Blue LED Lit Lock/Window Switch Mod Toyota LED Bed Lights Leather Perforated Wrapped Steering Wheel Black TRD Shift Knob ESP Long Box BakFlip MX4 Bed Cover
    Me too. I sub the weld out.
     
  29. Jan 14, 2020 at 9:53 PM
    #29
    Glockmeister

    Glockmeister New Member

    Joined:
    Sep 15, 2019
    Member:
    #36188
    Messages:
    182
    Gender:
    Male
    North of the summer hell
    Vehicle:
    ‘17 Crewmax SR5 4X4 TRD
    Well if you see a 2017 white SR5 CM waving at you, it could be me. :) Hard to miss a red truck with that plate.
    Nice mod!
     
  30. Jan 15, 2020 at 12:03 AM
    #30
    Challenger1

    Challenger1 Gramping

    Joined:
    Apr 22, 2018
    Member:
    #14678
    Messages:
    798
    Gender:
    Male
    First Name:
    Andy
    Southern California /Tustin
    Nice! Can’t wait to see the finished bumper
     
    Mountun Goat likes this.

Products Discussed in

To Top