Morimoto DRL stopped.

*update
Retrofit Source was great, I messaged them with my issue, they quickly diagnosed it and sent me a new/ updated drl harnesses. Fixed the issue.

I have a 2011 Tundra with morimoto xb headlights, just over a year old.
Blinkers work, headlights work and parking lights work. Could it be as simple as a fuse.
Has anyone experienced this.
Thanks

 

Is it both headlights, or just one?

 

Both

 

Check the harness? There’s a specific one for DRL and Morimoto lights.
Previous thread discusses DRL issues with aftermarket lights:

https://www.tundras.com/threads/what-fuse-for-drl.69778/

 

Other than making sure the harness was still firmly connected I haven't done much troubleshooting. I'll check that link out. Thanks

 

Since both are out, I'm betting that it is the fuse. There are 2 fuses in the tap and one of them powers the DRL's.

 

That's what I was hoping, I'll test them once I'm home

 

*update
Retrofit Source was great, I messaged them with my issue, they quickly diagnosed it and sent me a new/ updated drl harnesses. Fixed the issue.

 

I just notice my DRL were not working. It was the top 3 amp fuse. Easy fix.

 

I believe that fuse is supposed to be a 5 or 10 amp isn't it?

 

I replaced it with whatever it was. 3 or 5. Small fuse. Small writing. I'm old. I matched the color.

 

It's all good...no worries. I can't remember from when I had them on my 2013. I have them on my 2020. I know on the initial release for the 2.5 gens the fuse kept blowing for some people. Morimoto had installed a 5 amp that was too small. They had them install a 10 amp.