ICON 17" Six Speed Wheels Picture thread :)

very nice. no more rubbing ?

 

None.

 

Looking good

 

nice and shiny !

 

what did you set your fox coils at ?

i am curious cause i am going to get coilovers in about a month and plan on running the same size tire 285/75/17.
i already have the rims, i was just going to try and use the factory uca's. i was just curious in your front settings since you weren't rubbing.

i was kind of thinking of setting mine at like 2.5" to 2.75", if that would clear (no rubbing) cause i should be fine with factory uca's at that height (if it was enough to clear the tires).

i don't mind spending $1,200-$1,400 for coilovers, i just wasn't crazy about $500-$700 on uca's for basically .5" to .25" more lift. i did all that with my tacoma, total chaos, cab chop, just going to keep it a little simpler on the tundra.

 

2.5"

 

That's factory spec, by the way. How they left Fox. They guys at Camburg suggested that's been set specifically for our trucks and advised me not to fool with it.

Of course they have played with the settings, and have not found any more suited to the Tundra.

 

Cool deal, i was hoping you were going to say 2.5". i will just set mine the same and hopefully will be fine with factory uca's, i know the higher i get above 2.5" the grater the chance of needing uca's there is.

 

That looks sharp

 

Thank you. I'm STOKED!!!

 

I think I want the machined for my 2017 1794. As you can see I have the Gunmetal 6 speeds. Im going to order the machined and put the gunmetal on my 2012 Black Platinum that I can't bring myself to sell..

Where did you order yours from? My Gunmetal 6speeds came from SDHQ. Trying to find best price. Got to order me a new set of tires as well.

 

Clean Looks good with the chrome emblems and bumper caps.

 

Finally got a cleaned up pic

 

DELETED your truck looks great. I'm going to order the Machined for mine Monday. Gonna put my Gunmetals on my 2012 Black Tundra. You did a good job. Great choices.

 

Thank you. Next up will be color matching the surround, or just a whole '19 TRD grill once they arrive. And, TRD LED headlights. Want BD LED to replace the fogs.

Thanks, man! I took a big chance as there was nothing else out there like it really. Didn't know how I'd like it until today. Suffice it to say, I'm pleased.

Now, I just hope my wife likes it. It's her daily!

 

@sdhq_offroad took care of me.

 

Looks great! I am tempted to put the same wheels on my truck. It's white, just would like to see another with the machined wheels.

 

Termite, I have the Gunmetal but give me til the end of the week and I will have the machined if SDHQ can get them to me by then.

 

I think they will look killer on white. The gunmetal are too dark for my taste, especially since I have a 1794 with chrome accents.

 

Six's installed on 285/75R17 Nitto Ridge grapplers

 

very nice. seeing a lot more of those six speed in the wild now.

 

Anyone running Nitto Trail Grap M/T’s in the 315/70/17 set up? Curious because those show a spec of 13.27 wide while other tires are more closer to 12.5 +/-

 

I’d say their lying another their size. That’s more like a 325

 

I wonder about that too. Figured I’d ask and see if any of us were running that tire. Specs seem to be on the wide side for most of that tire. So not sure how accurate it is.

 

35s ? or 315/70 ?

 

35x12.50x17

 

HEY TREEMITE,

1. Icon Six Speeds Gunmetal
2. Icon Six Speeds Machined
3. Icon Six Speeds Machined

Going to put the Gunmetals on my 2012 Tundra - Black Platinum

 

Nice! Are the machines wheels like clear coated or anything? Or is it strait up raw metal?

 

I don't think they are clear coated but they are polished/brushed I guess you could say. They have the same finish the Gunmetals have , but it isn't that cheap clear plastic like shit you find on factory wheels