How to: Zero Point Calibration, VSC

I had to do this after leveling my 2010 Crewmax. Had the same issues with my Tacoma after lifting it as well. The reset procedure is identical on both vehicles. I used this walkthrough on the Tacoma forums & it worked perfectly on my Tundra & Tacoma. fyi- a paperclip works well to short out the pins.

https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

 

Just did this on my 08 sr5 Tundra and it reset everything thank you!!!

 

Aaah, nice. Had this happen the other day. Scared the shiiiite outta me. I’ve lifted it and had an alignment, looks like I need to do this.

 

I'm shorting out the same set of pins in that Tacoma thread but my lights aren't blinking, is their a trick to this that I'm missing?

 

hmmm... not that I know of- same procedure worked for me

 

I've had my lift on for 3 weeks with no issues, went to get my alignment today and immediately got the pcs, abs, and trailer brake lights on now. When I try to jump pins 4-12 I'm not getting any kind of change to the lights on the cluster.