General Supercharger Thread

WOW!!! At least you found something wrong and an easy fix and hopefully probably that will be all that it is!! . Good luck

 

Heck ya, got pressure!

 

Well I hope it doesn't blow again! This is what I used, doesn't say anything about pressure rating

 

https://www.autozone.com/plumbing-h...l-24in-x-3-8in-fuel-emissions-hose/534817_0_0

Same part number and says it's rated for low pressure fuel systems. Might want to see if you can confirm what it's meant for.

 

Dang it. I'm not lowering the tank again today, I'm already out to buy a celebratory 6 pack! Hopefully it just blew because it was kinked a bit, which I'm thinking happened. Shouldn't kink this time around

 

Not as great a deal as the other one that sadly turned out to be a scam but here’s one in Texas, older model with the TRD logo. Guy seems to be legit but always gotta be careful. Just thought I’d share though for anyone interested, would love to get it myself but no clue if it'd work on FFV and the dudes a little far.

 

That one is indeed legitimate, he’s a moderator on the boosted page. I think that tap on the front left of the blower he added on. It is an IAT sensor to get an accurate intake temp like the harrop instead of using the MAF sensor.

 

I don’t think it’s going to work long term but you bought some time. Search for fuel injection hose. Reinforced for higher pressure.

 

Ya, at least until I can empty the tank again. That was a bitch getting it back up full

 

How the hell did you get it down full? Multiple jacks?

 

Ya, two floor jacks. Plus like a 1sqft piece of plywood on them to center it.

And in retrospect, I should have left some 2x4's down for the tank to sit on, to leave room for the jack to get back under. I only have 11" of clearance at the frame rail, and even with the tank on the floor I had to lift the truck some to slide the tank out

 

Well now you can get it empty and plan ahead before it blows next week

 

About to order this

EVIL ENERGY Fuel Line Hose 3/8 Push Lock Fuel Hose Rubber NBR SAE 30R7 10FT 300PSI

$15 EVIL ENERGY 3/8 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 10FT 300PSI

https://www.amazon.com/dp/B097HD94NH

 

I'm here for him telling us how he had to replace the second fuel line literally in the parking lot of the auto parts store 30 seconds after purchasing the new one.

 

Make sure it’s submersible.

 

Fuel shit is always such an absolute bitch. I've had nearly every possible issue with fuel stuff, most of it resulting from racecars with systems cobbled together. "Fuel safe" foam that degrades and clogs things, FPRs that can't handle the pressure of a pump and get overpowered, the FPR losing pressure and having to fuck with it to work, lines kinked, hydramats, going arm deep into a full fuel cell to undo fittings, fucking with check valves, pumps that burn up, injectors that don't seat, fuel lines that leak, fuel lines that burst, the list goes on and on.

I absolutely despise fuel systems, it seems like no matter how much planning and quality of parts you buy something inevitably doesn't work out and it's a complete bitch to diagnose. At least this thread has proven I'm not alone, considering the issues we see every month from something as basic as the fuel pump and how it sits in the canister to the injectors not seating.

 

This is wildly expensive but seems to be what is needed.

$25 ACDelco Professional 32306 Submersible Fuel Line Hose

https://www.amazon.com/ACDelco-32306-Professional-Submersible-Fuel/dp/B0049BIGB6

 

Yeah, that's what I was thinking had happened, same thing happened on my Tacoma...twice!

 

When you take it out for the third time, drill some holes in the side of the basket near the bottom to help it fill. Prospeed verbally doesn't recommend this as they don't encourage WOT pulls under 1/2 tank due to sloshing. However I've talked to a few of their customers that told me they drill the holes if you have them do the s/c install. Can't hurt

 

I did this on mine no issues

 

Same... after dropping the tank a second time to chase fuel issues of my own!

 

Cool. I like how it says no effect on engine durability. I'll buy that for a dollar.

 

Nobody expects the Spanish Inquisition.

 

@reywcms is the only one running the Whipple at this time. Even if the kit comes with a canned tune I would get a custom tune so your truck runs tip top.

 

I had that expression when I saw their pricing.

 

If you sign up for installer newsletters there are usually deals twice a year that take drop the price on blowers. Whipples had some killer deals at the end of the year.

 

good idea! do you remember who it was that had the great deal last year?

 

1 post sale thread that's gon get deleted.

https://www.tundras.com/threads/5-7-trd-supercharger.121048/

e30cabrio,davidrussenposted a new thread to a forum you are watching atToyota Tundra Forum.

5.7 TRD SUPERCHARGER

TRD supercharger - came off 2011 Tundra with the 5.7 at 40k miles. Zero issues with the unit can be inspected by the buyer before purchase.
if interested please inbox me

 

I actually have two large holes already from the hose clamp that I was using to keep pump secured in place to the housing. That step isn't in the PS instructions, but are in the URD instructions that I used as supplemental. Plus it's what I did when replacing the Tacoma pump.

 

You're right, they aren't in the PS instructions. That was another reason we dropped it a second time lol. PS clamps the pump and drills holes in the basket near the bottom and also use a ptfe line rather than rubber due to swelling and bursting. Looks like yours burst the first time?