GEN 3 (2022+) Wheels and Tires Photo thread

Worksjo, That’s great info!

It looks like I am adding 16lbs per corner.

 

What’s your setup ? Looks phenomenal !

 

Thanks,

Wheels are flow formed 20x8 1/2 et +15 with toyo open country 295/60/r20. Added timbrens SES to the rear but they don't change the appearance just help with levelling the trailer. And 1.75" RC levelling kit up front, that's it.

I will work on a full on suspension once I use the truck for a bit.

 

Who makes the wheels ? Maybe I’m not reading right

 

Oh Sorry, They are made by a company called Fast and the model is: FC04x. They make these specifically for the Gen 3 Tundra as they have a center bore of 95.1mm. I think these are the only vehicles that have that bore and 6 x 139.5 bolt circle. Mine are gloss black metallic and you can get a cool red cap to make it look more TRDish.

 

17x8 Method 316 +25. Wrapped in 285-70R17 Falken Wildpeaks. Stock suspension no rubbing.

 

After a year of running stock TRD OR wheels with Cooper LT275/65R20 tires, decided to go all out.

First, coopers are awesome, not my first cooper set. However, these tires are heavy; significant hit on mpg, power and ride quality. For me, the latter two were major problems.

I decided to go for larger tires, but lighter. Specially, went for Wrangler Territory 315/70R17, which are 9lbs lighter than coopers, wrapped around Methods (MR305 17x8.5 +25mm offset). Total wheel tire package is now about 18-20 lbs lighter per wheel, which is a lot.

wow, ride quality is awesome now, will have to wait to give an opinion on power and mpg..

In 2 months, my King suspension is coming, so front will get 1.2 inch lift.

ps: truck has stock height and suspension. The rear axle has about 400lbs load,my old tires and wheels.Hence it does look relatively level.

 

Other shot of mine:

(photos by tylerbruckhorst)

 

Any one have experience with the Nitto recon grappler in the snow and ice ? I know it doesn’t have the 3 peak snow rating. I see conflicting reports of them and would love to hear anyone’s input

 

Looking awesome! That is a perfect wheel poke tire setup. Have you checked clearance when flexed?

 

I had to remove the front mud flaps and fold back the wheel well fabric felt. No rubbing issues I have noticed so far driving normally and fully turning the wheels, but have not flexed it off road yet.

 

35” BFG KM3s x 17” Volk TE37XTs -10 offset

 

finally installed my 18” methods with Michelin 275/70

 

None at all. Plenty of room. I tow a drift boat and motorcycles. Nothing very heavy.

 

Yes, TRD Sport. AT3's are fine. They are quiet and offer a nice ride. I lose about 1mpg it seems like.

 

Looks mean.

What did you do with your take-offs?

 

Sick! More pics please.

 

Nice! I’m thinking about going with Michelin LTX as well. Nice setup.

 

I still have them but I will be selling them as a tire/wheel combo soon.

 

Thanks man! Here are a few more. The -10 offset gives it a lot of poke but looks fine with bigger tires.

 

It looks like a whole different color depending upon the lighting

 

Ok - after basically lurking and asking a question here and there. Now I have done some stuff worthy of post and pics.
Here are details of the mods (and a few notes on my experience):
- Rough Country N3 struts 2" up front
- RC great on the phone/delivered on time
- Easy install by local Kal Tire, alignment was very close
- Not an engineer but laying the factory/RC part side-by-side clearly the RC is beefier and quality appears good
- Initial performance - controls big new boots well.
- 35x12.5/18 BFG KO2 12 ply
- good price from Kal equal if not better than Falken and other options

- Replika Wheels
- great price

 

Where the pics??

 

dammit posted accidentally - post now improved with actual pics!
No rub - and I tried. UCA clear by an inch.


RC N3 2' struts
BFG 35x12.5/18
Replika 8x18 +60

So far so good - shout out to Kal Tire and Kaiben in Metro Vancouver - amazing service and price.

 

Thank you, I’ve alway put Michelins on all my vehicles..

 

295/70/r18 40 psi and I gained and inch of lift no level on stock suspension

 

My question is what psi are you running on your 295-70r18’s

 

Looks great. I like the stance.

 

How do you like the ride with the new tires compared to stock? I would imagine those extra ply’s make some difference.

 

Yeah iPhones or any camera phones seem to have a hard time showing the actual Solar Octane color. Most of them come out red