1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

DUROBUMPS

Discussion in 'New Member Introductions' started by Durobumps, May 3, 2019.

  1. May 3, 2019 at 1:10 AM
    #1
    Durobumps

    Durobumps [OP] Made in the U.S.A.

    Joined:
    May 2, 2019
    Member:
    #29989
    Messages:
    12
    First Name:
    Plastics Guy
    Tucson, Arizona
    Vehicle:
    Are we Active now?
    Use TRON10 for 10% Off and Free Shipping
    DuroBumps-Logo.png
    Hey guys! My name is Curtis from Tucson, Arizona but I'm more commonly known as "The Plastics Guy". I am the sole owner, operator, and manufacture of DUROBUMPS :wave:

    Durobumps LLC is the first and only Dual Durometer Rubber Bump Stops created specifically for Toyota Trucks. We don’t create just one universal size bump stop and sell spacers to accommodate your specific lift like our Competitors. Our Bump Stops are built application specific, and made for 2nd & 3rd Gen TUNDRAS, 4Runners, Tacomas, FJs and currently in R&D for 1st Gen Tundras and the Lexus GX 460/470.

    Since our Bump Stops are made using Dual Durometer Rubber, we are able to control the compression rate and absorb the up travel inertia in a much more controlled fashion than any of our competitor’s products. The upper portion of our Bump Stops are made of a softer rubber with the primary body of the Bump Stop being much firmer and providing Progressive Dampening upon impact. This greatly increases the vehicle's stability on the trail as the Bump Stops absorb and deaden the suspension’s up stroke in a smooth progressive fashion!

    All of our products are Proudly Made In The U.S.A.:oldglory:

    I hope to bring the Tundra Community here on Tundras.com together with the help of our good friend @TRON and answer any questions you may have. You can see all of our products and further details at www.toyotabumpstops.com

    Tundra Front Bumps.jpg
    "BAJA PROVEN" - @TRON
    [​IMG]
     
    Last edited: May 3, 2019
  2. May 3, 2019 at 1:50 AM
    #2
    TRON

    TRON Is LIVE on the GRID.

    Joined:
    Jan 8, 2016
    Member:
    #2398
    Messages:
    650
    Gender:
    Male
    First Name:
    Stefen
    Gilbert, Arizona
    Vehicle:
    IG: @ST3F3NS
    DUROBUMPS Use TRON10 for 10% Off & Free Shipping
    I'd like to be the first in saying how excited I am to help and be apart of an awesome company that produces a top notch product made right here in the U.S.A.! :oldglory: Earlier this year a friend reached out to me and recommended I contact Curtis at @Durobumps for some R&D of the Tundra Bump Stops. A few short weeks later, I had the first prototype set of front bump stops on my truck and was headed off to Baja California for some product testing in some of the most extreme testing environments known to the off-road world! My Durobumps performed flawlessly throughout the rigorous 5 day expedition, which estimated over 500 miles of brutal terrain! I have no doubt, the trip would not have been the same without these incredible Bump Stops. The smooth progressive feel is as true as they claim, and aids in the suspension up travel limiting those rough bottom outs:cool:

    As of right now, the front Bump Stops for 2nd and 3rd Gen Tundras are in full production. The 1st Gen Tundra Front and Rear Bump Stops, as well as the Rear 2nd & 3rd Gen Bump Stops are currently in the R&D phase, but should be released within the next few weeks!

    Seriously do not hesitate in grabbing a set and be sure to use my discount code: "TRON10" for 10% off and free shipping!
     
    Last edited: May 3, 2019
    GAknight, rons23, jc153 and 4 others like this.
  3. May 3, 2019 at 4:30 AM
    #3
    Larmand

    Larmand Super Secret Elite Member #6

    Joined:
    Dec 30, 2017
    Member:
    #11835
    Messages:
    3,839
    Gender:
    Male
    First Name:
    Lucas
    Fort Worth, TX
    Vehicle:
    2018 SLIGHTLY MODIFIED SR5 TRD CM 4x4-CEMENT
    Welcome to the party!!
     
    TRON and Durobumps [OP] like this.
  4. May 3, 2019 at 5:38 AM
    #4
    TXRailRoads73

    TXRailRoads73 CHOO CHOO MOTHERPHACAZZZ!

    Joined:
    May 30, 2016
    Member:
    #3487
    Messages:
    42,862
    Gender:
    Male
    First Name:
    Adam
    The Lone Star State, RGV, TEXAS
    Vehicle:
    '14 SR5 TSS CM MGM
    Welcome from Texas
     
    TRON and Durobumps [OP] like this.
  5. May 3, 2019 at 7:10 AM
    #5
    Broncobroke

    Broncobroke Super White Power

    Joined:
    Dec 13, 2017
    Member:
    #11499
    Messages:
    263
    Gender:
    Male
    Vehicle:
    2017 White Tundra 1794
    Welcome. May have to hold off on my bump stop order.
     
    Durobumps [OP] and TRON like this.
  6. May 3, 2019 at 7:29 AM
    #6
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Welcome Curtis, we met at T2S. Lemme know when you guys have bumps for the TC LT ready and fender liners too. I'll post a pic of my wheel well. The compression travel w/ 37s has reshaped the metal inner fender. So, I think the liners need to mount WAY up in the wheel well.
     
  7. May 3, 2019 at 7:33 AM
    #7
    JTS2019TUNDRA

    JTS2019TUNDRA New Member

    Joined:
    Feb 24, 2015
    Member:
    #997
    Messages:
    182
    Gender:
    Male
    First Name:
    Jamie
    Vehicle:
    2019 MGM Tundra Crewmax TRD Sport 4x4
    Stock
    Hey buddy, glad you made it on here. I will have to say that Durobumps are worth every penny, I beat the hell out of my truck and the bottom out is super smooth can't wait for the rears to be out.
     
    Durobumps [OP] and TRON like this.
  8. May 3, 2019 at 8:13 AM
    #8
    OR18TRD

    OR18TRD Pândâ Crüe I Know Super Secret Elite Member #1

    Joined:
    Oct 30, 2018
    Member:
    #21119
    Messages:
    7,561
    Gender:
    Male
    First Name:
    Pândâ
    PDX
    Vehicle:
    2018 Pândâ Crüemax
    Suspension: front- Bilsein 6112 set at 1.9”; Rear- bilstein 5160 with maxtrac 1” shackel. Wheels: Method MR308 roost wheels 18x9” +18 offset. Tires: 275/70/18 Goodyear wrangler DuraTrac’s Removed front mudflaps and moved front wheel well liner forward. Bakflip MX4 Tonneau cover Line-x premium bed liner aFe CAI Rear differential breather moved behind taillight Debadged Windows tinted 20% ESP locking long box rear seat storage OEM all weather mats 6 3/4” antenna Coverking leather rear seat cover
    Welcome fellow enthusiast :hattip:
     
    Durobumps [OP] and TRON like this.
  9. May 3, 2019 at 8:21 AM
    #9
    PLC721

    PLC721 New Member

    Joined:
    Aug 26, 2015
    Member:
    #1714
    Messages:
    962
    Gender:
    Male
    First Name:
    Patrick
    Chandler, AZ
    Vehicle:
    2017 CrewMax
    Follow my life on IG: PLC721
    Thanks @Durobumps for the quality bumps! My set has been beat on frequently now!
     
    PureTundra, Durobumps [OP] and TRON like this.
  10. May 3, 2019 at 8:32 AM
    #10
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,500
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    I told you how to deal with those inner fender...
     
    TRON and 831Tun like this.
  11. May 3, 2019 at 8:33 AM
    #11
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,500
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    is he making bumps specifically for TC long travel kits??
     
  12. May 3, 2019 at 8:43 AM
    #12
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Yes, and working directly with TC.
     
  13. May 3, 2019 at 8:44 AM
    #13
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Yes you did. I'm just letting BFG do a little of the work for me.;)
     
  14. May 3, 2019 at 8:49 AM
    #14
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    You could say, BFG beat BFH to the punch.
     
  15. May 3, 2019 at 8:52 AM
    #15
    osidepunker

    osidepunker OsidePunker

    Joined:
    Oct 19, 2016
    Member:
    #4918
    Messages:
    2,500
    Gender:
    Male
    First Name:
    Alex
    SoCal
    Vehicle:
    2013 Tundra DC 4x4
    Full LT, full armor, fully self contained Speed Glamper
    The problem with that is you will get cracks. Ask me how I know...

    If you bend with a bottle jack you can control the places where it bends and do it slowly so you avoid cracks
     
    joonbug, Watt maker and TRON like this.
  16. May 3, 2019 at 10:42 AM
    #16
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    9,591
    Gender:
    Male
    Vehicle:
    2012
    yahooo..welcome on board !
     
    TRON likes this.
  17. May 3, 2019 at 10:42 AM
    #17
    TheBeast

    TheBeast The Beach

    Joined:
    Apr 27, 2016
    Member:
    #3246
    Messages:
    9,591
    Gender:
    Male
    Vehicle:
    2012
    :rockband:
     
    TRON likes this.
  18. May 3, 2019 at 11:46 AM
    #18
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    I don't think this was from the "jump" that @papasmurf pointed out on the Smiley Rock trail. I think it happened on our Barstow detour where an obstacle jumped out of nowhere.IMG_20190430_085108309.jpg
     
  19. May 3, 2019 at 11:51 AM
    #19
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    8,474
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, charcoal filter delete, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, Tyger soft tonneau cover, Linex with uv protection, TRD swaybar, TRD center caps, TRD Pro grille insert, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate.
    Don’t you just hate it when shit jumps right out at you! LOL
     
    5.7TRDProm, joonbug and 831Tun like this.
  20. May 3, 2019 at 11:56 AM
    #20
    JDL17CM4x4

    JDL17CM4x4 Adventure Mobile

    Joined:
    Dec 26, 2017
    Member:
    #11755
    Messages:
    493
    Gender:
    Male
    First Name:
    Daniel
    Riverside, CA
    Vehicle:
    2017 White Tundra TRD 4x4
    More to Come ...
    Welcome. If i had some extra cash i would have picked up a set at T2S for sure. Way better then those cheesy OEM ones after seeing a few trucks run them out there.
     
    Durobumps [OP], TRON and joonbug like this.
  21. May 3, 2019 at 12:14 PM
    #21
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    8,474
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, charcoal filter delete, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, Tyger soft tonneau cover, Linex with uv protection, TRD swaybar, TRD center caps, TRD Pro grille insert, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate.
    Sounds like a couple steps above superbumps too.
     
  22. May 3, 2019 at 12:15 PM
    #22
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Yes I do! Frickin' ambush hunters. LOL
     
  23. May 3, 2019 at 12:16 PM
    #23
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    They did appear to be a step up from Super Bumps.
     
  24. May 3, 2019 at 12:59 PM
    #24
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    I was talking with @Help at T2S and he managed to do it but broke ADS C/Os in the process. So, no...... but it is possible.:notsure:
     
  25. May 3, 2019 at 1:16 PM
    #25
    831Tun

    831Tun crazy Bastrd

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    9,992
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    TC LT w/ king 2.5 C/O and bypass, ADS bypass rear, Toytech shackles, TRD dual exhaust dumped, KM3 37s on Method standard +18. N_Fab front bumper, Westin rear w/ hitch relocate, RCI skids, Desert Eagle tranny skid, All Pro sliders, ARB dual compressor, 5.29 gears and ARB rear locker
    Can't hurt. Added piece of mind and good prep for those "Oh s4it!" moments.
     
    GodlessPro, TRON, Watt maker and 2 others like this.
  26. May 3, 2019 at 5:32 PM
    #26
    tightywhitey

    tightywhitey New Member

    Joined:
    Nov 25, 2018
    Member:
    #22190
    Messages:
    149
    New Orleans, LA
    Vehicle:
    2015 Toyota Tundra CREWMAX - Louisiana Edition
    I am a pavement pimp. What will these bumpstocks do for me?
     
  27. May 5, 2019 at 8:41 AM
    #27
    jc153

    jc153 Speed-ish Glamper

    Joined:
    Apr 20, 2017
    Member:
    #7328
    Messages:
    405
    Gender:
    Male
    First Name:
    John
    San Diego
    Vehicle:
    2009 Tundra Ltd CM 4x4
    TC Front Long Travel, King LT Coilovers, RCV Axles, TC Spindle Gussets, DuroBumps, CB Steering Kit, Carrier Bearing Drop & ABS Drop Kit, Rear ADS Triple Bypasses w/Deaver U748 Springs & TC Shackles, 17" Method Standards, 35/12.5/17 Toyo RT's, Nitro 488 Gears w/Auburn LSD, Evil Manufacturing Bumpers, RCI Skid Plates, White Knuckle Sliders, BAMuffler 8" Catback, LED's Everywhere
    I just installed the bumps I won in the T2S raffle. @Durobumps thanks for taking the time to explain your product.
    I’ll give feedback as I get some miles on them.
     
    Durobumps [OP], TRON and 831Tun like this.
  28. May 5, 2019 at 8:47 AM
    #28
    15whtrd

    15whtrd Mr. Blonde

    Joined:
    Sep 20, 2015
    Member:
    #1829
    Messages:
    8,474
    Gender:
    Male
    First Name:
    Sean
    SoCal
    Vehicle:
    White 2015 Tundra DC SR5 TRD 4x4 5.7L, White 2003 Sequoia 2WD
    TRD Pro suspension, +2 Coachbuilder shackles, 2015 TRD Pro headlights, 20% ceramic tinted windows, charcoal filter delete, aFe drop in pro s dry air filter, TRD airflow accelerator, TRD oil fill cap, TRD 18 psi radiator cap, BDX Bullydog tuner, Weathertech floor mats front and rear, rear seat fold down mod, Tyger soft tonneau cover, Linex with uv protection, TRD swaybar, TRD center caps, TRD Pro grille insert, aluminum oil filter canister, Real truck tailgate seal, Pop-n-lock tailgate lock actuator, rear diff breather relocate, RCI front skid plate.
    Make those hits over speed bumps and the G outs through the dips not hit so hard upon full compression. :D
     
    Durobumps [OP] likes this.
  29. May 8, 2019 at 8:06 AM
    #29
    Durobumps

    Durobumps [OP] Made in the U.S.A.

    Joined:
    May 2, 2019
    Member:
    #29989
    Messages:
    12
    First Name:
    Plastics Guy
    Tucson, Arizona
    Vehicle:
    Are we Active now?
    Use TRON10 for 10% Off and Free Shipping
    Definitely agree you should hold off and order some Durobumps!
    Once we finish the complete kit for Tundra Bump Stops, the wheel well liners will be revisited. It seems like many could benefit from a solid set of liners instead of those loose DIY kits out there :thumbsup:

    It's all on the works, but we are definitely talking with TC and perhaps a few more big names ;)

    You said it! The OEM bump stops do more harm than good.
    Indeed and we will certainly stand by that! No foam here.

    Well Durobumps are for everyone and I assure you, even pavement warriors will notice the difference! Save your shocks that extra stress and let the bump stops provide some progressive assistance at those mall parking lots and speed humps :thumbsup:

    Looking forward to your review and not a problem. Glad to help where we can! :cheers:

    This exactly!
     
    Sunnier, TRON, 15whtrd and 1 other person like this.
  30. May 9, 2019 at 2:34 AM
    #30
    rons23

    rons23 Get The Led Out!!!

    Joined:
    Sep 18, 2014
    Member:
    #625
    Messages:
    7,650
    Gender:
    Male
    First Name:
    Ron
    Kill Devil Hills
    Vehicle:
    2008 Nautical Blue TRD
    Sabm (Gtek-Fab), Blake Carbon Diamond Plate door sil protecters, and Air Dam mod, Black Rivited Grill, Devil Horns- Black Anodized(Diaz Fabrication), Hid's in Low Beams and Fogs -6000k, Piaa Extreme for High Beams. Black Rhino Step Tubes, Razir Led interior Lights (white), Low Profile Black Diamond Plate Tool Box, Trd accesories, Weather Tech Mats, Carbon Fiber Shorty Antenna, Drl's, Plasta Dipped Badges + Front Grill Surround
    Welcome from Obx
     

Products Discussed in

To Top