1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Dirty Deeds Injectors

Discussion in '1st Gen Tundras (2000-2006)' started by Hooptytrix, Jun 9, 2020.

  1. Jun 28, 2020 at 7:55 AM
    #31
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    The maf on these trucks are sensitive. I opted to pay extra for the Jet maf, even if it only gives 1mpg improvement I'll take it.
    On my 01 Tundra it seems like the combination of jet maf and aem dry filter had more of an improvement in performance than same combo on 05. No real data to back that up but the 01 had 35x12.5 tires and I was averaging over 15 mpg. I drive the local highway quite a bit over 80 mph
     
  2. Jun 28, 2020 at 8:30 AM
    #32
    RR60

    RR60 New Member

    Joined:
    Feb 10, 2017
    Member:
    #6290
    Messages:
    115
    Vehicle:
    2003 SR5 Tundra long bed
    Thanks
    Curious what Big Gurrl is? A auto parts site?
     
    FrenchToasty and Tundra2 like this.
  3. Jun 28, 2020 at 8:31 AM
    #33
    Tundra2

    Tundra2 Remember: post in moderation, and mostly on topic.

    Joined:
    Feb 10, 2019
    Member:
    #25875
    Messages:
    2,023
    Gender:
    Male
    First Name:
    Noah
    Western Kentucky
    Vehicle:
    '02 Tundra V6 SR5
    Deer guard, LED everything.
    Amazon. It's old site lingo.
     
    Rex Kramer likes this.
  4. Jun 28, 2020 at 9:51 AM
    #34
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    They will have to change their name because Racisss!?!?
     
  5. Jun 28, 2020 at 9:54 AM
    #35
    Tundra2

    Tundra2 Remember: post in moderation, and mostly on topic.

    Joined:
    Feb 10, 2019
    Member:
    #25875
    Messages:
    2,023
    Gender:
    Male
    First Name:
    Noah
    Western Kentucky
    Vehicle:
    '02 Tundra V6 SR5
    Deer guard, LED everything.
    It will have to be something similar to the "primary" bedroom
     
  6. Jun 28, 2020 at 10:01 AM
    #36
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    We could go on and on. I could go on a dumb rant blah blah. Get kicked off for stating the obvious of what most people think, but we sit here and take the spoiled temper tantrums. Thats it for me. Maybe you gun guys can dance around the topic too? Or Hoopty can go full Napalm in the morning? How did he get a pass on that? Glad he did, but jus’ sayin’!
     
  7. Jun 28, 2020 at 10:04 AM
    #37
    Tundra2

    Tundra2 Remember: post in moderation, and mostly on topic.

    Joined:
    Feb 10, 2019
    Member:
    #25875
    Messages:
    2,023
    Gender:
    Male
    First Name:
    Noah
    Western Kentucky
    Vehicle:
    '02 Tundra V6 SR5
    Deer guard, LED everything.
    How did we both scrape by?
     
    Hooptytrix [OP] likes this.
  8. Jun 28, 2020 at 10:45 AM
    #38
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    Maybe because you guys are both buying injectors!:D
     
    Hooptytrix [OP] and Tundra2 like this.
  9. Jun 28, 2020 at 10:45 AM
    #39
    Tundra2

    Tundra2 Remember: post in moderation, and mostly on topic.

    Joined:
    Feb 10, 2019
    Member:
    #25875
    Messages:
    2,023
    Gender:
    Male
    First Name:
    Noah
    Western Kentucky
    Vehicle:
    '02 Tundra V6 SR5
    Deer guard, LED everything.
    Customer, customer. Lol

    Busi-Nass
     
    Hooptytrix [OP] likes this.
  10. Jun 28, 2020 at 12:36 PM
    #40
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    I've come close to opening my mouth a few more times but out of an abundance of respect to many members I just try to keep the napalm on the shelf.




    But it keeps talking to me
    "Take me for a spin buddy"
    :hattip:
     
  11. Jun 28, 2020 at 1:56 PM
    #41
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    Yeah same here. Its not worth it. Sad thing is losing family members and friends over all this made up crap. They are the ones cutting off relationships. They (out of nowhere) spout off all their Slogans and Chants and Dog Whistles and then tell me I can’t say anything back because...

    Its like I’m minding my own business and they make a big issue and push all their crap down my throat and I’m just going to sit there and take it. :rolleyes::rofl:

    Never thought we’d be in this kind of shape as a Nation. :annoyed:
     
  12. Jun 28, 2020 at 3:24 PM
    #42
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    Ain't that the truth brother. I tell people that red & blue, republican & democrat, black & white, and everything in between is designed to keep a nation of free people divided. Read the pledge of allegiance, One nation under God, INDIVISIBLE with liberty and justice for all. As a divided nation, we have lost so much.
    I am not perfect but I at least understand and try to remind myself of this. That is why I will sit and break bread with any and all kinds of people.
     
  13. Jun 28, 2020 at 3:27 PM
    #43
    Rex Kramer

    Rex Kramer New Member

    Joined:
    Apr 9, 2017
    Member:
    #7181
    Messages:
    4,841
    Gender:
    Male
    First Name:
    Kevin
    Georgia
    Vehicle:
    2002 4.7L RCLB 4X4 2007 5.7L RCSB 2X4
    Let me know if anyone comes across a race other than HUMAN on this planet... only man can divide us into groups... I really want to try these injectors, can someone produce a video for DIY installation - please?
     
  14. Jun 28, 2020 at 3:36 PM
    #44
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    In all honesty, it's not that bad of job to pull off in a couple of hours. Take a look around the top of each side and you can see there isn't too much in the way
     
  15. Jun 28, 2020 at 3:38 PM
    #45
    FrenchToasty

    FrenchToasty Desert rat

    Joined:
    Sep 15, 2019
    Member:
    #36156
    Messages:
    1,088
    Gender:
    Male
    First Name:
    Mo
    SoAz
    Vehicle:
    06 phantom grey purrrrl
    PHM did a good write up for his, lots of red arrows. I found it helpful as a video
     
  16. Jun 28, 2020 at 3:38 PM
    #46
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    No, but you can visit my build page for detailed how-to diagrams or I can post them here.
     
    Hooptytrix [OP] and FrenchToasty like this.
  17. Jun 28, 2020 at 3:41 PM
    #47
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
  18. Jun 28, 2020 at 3:47 PM
    #48
    Rex Kramer

    Rex Kramer New Member

    Joined:
    Apr 9, 2017
    Member:
    #7181
    Messages:
    4,841
    Gender:
    Male
    First Name:
    Kevin
    Georgia
    Vehicle:
    2002 4.7L RCLB 4X4 2007 5.7L RCSB 2X4
    That's cool, but I guess I am looking for a step by step sequence that I can reverse so it all goes back together correctly.
     
  19. Jun 28, 2020 at 3:51 PM
    #49
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    Take the pics and look under the hood, you can see exactly what is what. It's a bit easier on the non vvti engines, I think there are a few less crappy thingy in the way
     
  20. Jun 28, 2020 at 3:52 PM
    #50
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    Take your own pictures and video as you go along. Write steps down. Only instructional I had was what Keith told me over the phone when I bought them. The main take away from him was don’t lose the banjo bolt washers! I had to figure out all the rest on my own. At least you have a diagram.
     
    Hooptytrix [OP] likes this.
  21. Jun 28, 2020 at 3:57 PM
    #51
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    Exactly what I got from Keith also, I just winged it and took my time. The drivers side was a bit frustrating, the damn injectors kept falling out as I wrestled getting the rail back in place
     
  22. Jun 28, 2020 at 5:30 PM
    #52
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    Yeah. Next time I’d start on the Pass Side as its so much easier. The Driver Side is a little difficult. 3.5 hours on the Driver and 2 hours on the Pass Side for me.

    5.5 Total Hours.
     
    Hooptytrix [OP] likes this.
  23. Jun 28, 2020 at 5:42 PM
    #53
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    Ouch.

    I did the passenger side in 45 minutes. And driver's side 2 hours
     
  24. Jun 28, 2020 at 5:45 PM
    #54
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    I really took my time. Took a few Hand Model Poses in between. It was cold that day and I needed hot rock treatments on the Hands for a few days after. I did recover, though.
     
    Hooptytrix [OP] likes this.
  25. Jun 28, 2020 at 5:47 PM
    #55
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    :rofl:
    I'm still recovering from this week of working on the truck.
     
  26. Jun 28, 2020 at 6:01 PM
    #56
    Rex Kramer

    Rex Kramer New Member

    Joined:
    Apr 9, 2017
    Member:
    #7181
    Messages:
    4,841
    Gender:
    Male
    First Name:
    Kevin
    Georgia
    Vehicle:
    2002 4.7L RCLB 4X4 2007 5.7L RCSB 2X4
    I don't have access to a garage or secure location, so I would need to knock it out as quick as possible. I appreciate the comments though.
     
  27. Jun 28, 2020 at 6:05 PM
    #57
    Professional Hand Model

    Professional Hand Model A.K.A ‘Golden Hands’

    Joined:
    Apr 29, 2018
    Member:
    #14878
    Messages:
    8,979
    Gender:
    Male
    First Name:
    Fred
    ‘Somewhere’... a State of Mind
    Vehicle:
    2002 Tundra SR5 4WD 4.7L AC Silver Metallica
    Hand Protectors
    I did mine outside even though I have a great little garage to stage from. You don’t need many tools. I’d set up a little work table for tools to rest and a 4’ ladder or step stool for stepping up for leverage even if you are tall. You got this.
     
    Hooptytrix [OP] likes this.
  28. Jun 28, 2020 at 6:21 PM
    #58
    FrenchToasty

    FrenchToasty Desert rat

    Joined:
    Sep 15, 2019
    Member:
    #36156
    Messages:
    1,088
    Gender:
    Male
    First Name:
    Mo
    SoAz
    Vehicle:
    06 phantom grey purrrrl
    @Rex Kramer i did mine outside under the shady mesquite tree, I started in the morning and finished by noon. My only snag was one injector connector prong slightly bent, not allowing the female plug to seat and hear that sweet sweet clack/click when they meet perfectly. Other than that it’s pretty easy
     
  29. Jun 28, 2020 at 6:26 PM
    #59
    Hooptytrix

    Hooptytrix [OP] Squeaky Chicken

    Joined:
    Nov 12, 2016
    Member:
    #5179
    Messages:
    996
    Gender:
    Male
    Dirty South
    Vehicle:
    2001 Tundra 4x4 Sold. 2005 Tundra SR5
    If you can turn a wrench
     
  30. Jun 28, 2020 at 6:33 PM
    #60
    FrenchToasty

    FrenchToasty Desert rat

    Joined:
    Sep 15, 2019
    Member:
    #36156
    Messages:
    1,088
    Gender:
    Male
    First Name:
    Mo
    SoAz
    Vehicle:
    06 phantom grey purrrrl
    I feel confident in his wrench turning abilities, sometimes you just need to be pushed into the water
     

Products Discussed in

To Top