@Cali Raised LED Full Product Line Launch and Pre-Sale (LED's, Mounts and Grilles)

Hello Tundra people. Who is ready for some LED mounts and a Pre-Sale!

We are proud to introduce our new Tundra line of LED mounts and also some upcoming products. We have been working hard on these and are excited to be part of the Tundra family! Big thank you to everyone who has helped us with getting these products ready!!!

We are working on getting some better high res photos, more to come soon!

We tested many of the new products on a 2014+ Tundra, we are verifying the fitment on 2007-2013 this week.

2014+ Tundra Ditch Mounts: We previously sold these but we would like to introduce our new version. These are the new Low Profile ditch mounts. They bolt on to your hood mounts, require zero cutting and fit nice and tight to your hood for a great look and light mount that suits your needs. They are made from 3/16" steel, CNC cut and bent and powder coated Semi-Gloss Black Mini Texture.


2014+ Tundra Grille Mount: These all new grille mounts will allow you to install up to two 42" dual row curved LED bars. For SR5, 1794, and TRD Off-Road grilles there is zero trimming required. For TRD Pro grille the bottom LED is zero cutting, the top LED requires some trimming of the inner ribs of the grill. We are making an instructional video to show this. These mounts are super strong and mount in several locations to provide a great mount that has no vibrations. They are made from 10 gauge cold rolled steel, CNC cut and bent and powder coated Semi-Gloss Black Mini Texture.






2014+ Tundra Lower Bumper Mount: The lower bumper mounts allow you to mount a single 32" dual row LED in the lower bumper grille. These are 100% bolt on and require zero drilling. They bolt in multiple location to provide a very strong mount that does not vibrate at all. They are made from 10 gauge cold rolled steel, CNC cut and bent and powder coated Semi-Gloss Black Mini Texture.





2014+ Tundra Fog Mounts: These are a replacement for your factory fog mounts. They allow you to install our 18W and 20W pods. They are 100% bolt on and if you get the mount and pod combo they will have an adapter plug to plug directly into your factory harness with not wire cutting. They are made from 12 gauge cold rolled steel, CNC cut, bent, welded and powder coated Semi-Gloss Black Mini Texture.





2nd Gen Tundra Roof Mounts: We have been selling our low profile roof mounts for about a year now. They allow you to install a 52" dual row LED light bar on your roof. They are low profile and keep the LED close to the windshield without interfering with your wiper blades. They are made from 11 gauge cold rolled steel, CNC cut and bent and powder coated Semi-Gloss Black Mini Texture.




2014+ Tundra TRD Pro Grille: That's right, we are now selling TRD Pro Grilles. This will replace the center insert of your grille with a TRD Pro insert. You retain/re-use the chrome or color matched trim ring of your grill and replace the center with the TRD Pro insert.




Our LEDs: We make some great LEDs. All of our LED light bars use 5 watt OSRAM LEDs. We use a 5D optic lens which condenses and projects light vs. a traditional reflector that has light scatter. They are IP68 rated to withstand water, dirt, mud, etc and are submersible up to 4 feet. They have a poly carbonate lens that will not crack or yellow. Finally all of our lights used a DT weatherproof plug and come with a free wiring harness, free shipping, no tax and a two year warranty.




THE RULES

- Use Code "TUNDRA" on caliraisedled.com to place your order and save 10% off regular price.
- Pre-Sale starts NOW and ends 8 April 2018, two weeks to order!
- Once the pre-sale is over, we have until 15 April 2017 to ship your order. Though most of these part will be in stock and ship well before.
- Not required - Post up on here, let’s talk, share your pictures, questions and write ups. It is the time for fun and friends so let’s have fun! We will be watching this tread as much as we can to answer questions and help. We will also be sharing our install videos as we make and edit them.


Coming Soon:

Bed Side Supports. Just like out Tacoma version, we will be making them for the Tundra.



Bed Molle Systems: We will soon be in the R&D phase of creating our Tundra bed Molle system similar to the Tacoma's. This will allow you to mount Molle compatible bags, Quick Fist clamps, High Lift Jacks and anything else you can think of!



Tube Bumpers and Rock Sliders: We are still in the early stages, but we are hoping by the end of summer to have our full line of tube front and rear bumpers and weld on rock sliders. Everything you need to protect your truck on the trail or mall parking lot, haha!

 

Cool stuff. Someone is taking the Tundra seriously and producing much needed items.

 

May have to take a look at your ditch light mounts. Are the lightbar grille and lower bumper mounts made to fit on 2nd gens?

 

These were all designed and tested on a 2014+ Tundra, we are verifying 2007-2013 this week and will post. I have updated the OP to show the years we have verified so far.

 

So the lower bumper mount...does it sit behind the opening and allow a dual row LED to work or does it need to be a single row slim LED?

 

of course there's a group buy right after i purchased the ditch light brackets and lights. Oh well, only missed out on $14.

Brackets already shipped. Will post pictures this week.

 

It fits a dual row for the 2014+. We are verifying fitment on the 2007-2013 this week.

 

Ok. I have a 30" bar mounted on my rack I would like to move to behind the lower grille to free up rooftop space for my rod rack. Is it adjustable enough that it should work with a 30" bar?

 

They are 32" mounting width and not side to side adjustable. You can use two 1" spacers if needed. Here are the spacers for a 1/4" or M6 bolt (most LEDs). You will just need a longer bolt to match it.
https://www.mcmaster.com/#92510a786/=1c51dtv

 

Have you test fitted behind the 2018 honeycomb grill?

 

Thanks! Now the hard part...convincing the wife.

 

Not yet

 

I may be in luck and my 30" bar is 32" to the mounts like yours now that I'm looking again at the pics. I'll have to measure.

 

Well if you need a test dummy let me know

 

Where are you located?

 

@Caliraisedled how much are the bed stiffeners? I don't see them on the website.

 

They are not available yet. We just posted apic of our Tacoma ones in the Coming Soon area. they will be the same price as the Tacoma ones.

 

When I spoke to them they said it allows the dual. That is what I am looking at purchasing. I also thought they were going to offer 15% and not 10% off. Still better than nothing...

 

Molle system looks cool

 

X2. That’s the first I’ve seen of its kind for Tundras.

 

Do the hidden grille and lower valance brackets come with the bolts needed to mount them or are we to use bolts already in place? If we need to buy our own can you tell us what kind. I'd hate to rip the grill apart only to find out that I need to drive somewhere to acquire the necessary hardware.

 

Comes with all required hardware, all spec'd for a perfect install. If you buy the combo you get the harness with the LED as well. Shouldn't need to run to the store for anything.

 

The combo, does that come with the switch as well?

 

The harness has a generic round switch. We do sell OEM style switches though that can be wired into the harness very easily.

 

Roseville, ca

 

Oh man that's a bit of a drive... haha

 

Thank you for the quick response. Will be ordering shortly.

 

True, when you replied to this email I assumed you had already test fitted it on the honeycomb grill.

 

Ya I apologize, I just talked to Blake and he didn't know the grill changed like that. If you would be interested we can do it this way. You can pick one up on our sale to save. Then you can install and let us know how it all fit. If there are any issues we will give you a full refund and pay for shipping back to us. If interested shoot me a PM and we can work out the details for you.

Thanks for the insight on the 2018. The grill and headlights have changed but not much else. So they should still mount in the same location.

 

We are jamming on some Tundra parts today!