Bilistien lift.

Ok guys I have been reading and finding 2 different answers. I’m wanting to put 6112 up front 1.9setting. And 5160 in the rear. And I’m putting 2 shims up on driver side and 1 shim on passenger side. Then putting 2 shims on each side of front bumper that equals 4 shims. Then I’m putting +1 rear coach builder shackles in the rear. If I do this exact set up will I be running into issues with the TSS and all the sensors stuff ? I do have a 2018 tundra. Please any comments

 

Do the recalls first.

 

What is all included for the recalls. I’m lost. Sorry

 

I'm 6112s front (top setting) and have 5160s in rear with add a leafs. I've had no issues with my TSS and use radar cruise daily. I drive ALOT of miles. 36k since August.

 

Awesome I hope I have the same of luck as u man

 

https://www.tundras.com/threads/recall-pre-collision-system-pcs.44085/

https://www.tundras.com/threads/pre-collision-assist-issues.44346/#post-1137502

https://www.tundras.com/threads/tss-p-recall-campaign.43472/

https://www.tundras.com/threads/poll-2018-tss-radar-precollision-problems.30411/

Just search , but those are some posts.