Big Chungus Tundra Build

Long time lurker that finally made an account! I’ve spent days of my life reading old threads, researching suspension, wheels, tires etc. So much information here that helped me, can’t thank everyone enough. I finished up my build last night and figured I would share.

Bilstein 6112 top setting
Bilstein 5160
Toytec shackles at 1.5” setting
1 CB shim driver side
Method 305 bronze 17x8.5
35x12.5r17 BFG KO2’s

June 25, 2022 - First photo of big chungus.



Parts on standby



August 10th - wheels and tires arrived



August 28th - 6112’s installed on top setting, one CB shim on driver side. 5160’s installed and Toytec shackles at 1.5” setting.



August 29th - wheels and tires installed at last! Very happy with the end result.

 

What's the offset on the rims, and did you have any rubbing issues? Stock UCA's?

Good looking set up by the way!!

 

Looks great! There is a Chungus amongus, you might say.

 

Thanks! Yes the UCAs are stock, getting an alignment later so we’ll see if they’re going to stay stock. Offset is 0, 4.75” backspace. It rubs pretty damn bad. After alignment I’ll do some trimming

 

Your truck looks amazing! I just ordered the same wheels with a smaller size tire yesterday. I'll be running Bilstein 6112s on the 1.9 setting. Did the single CB shims
you installed help with the drivers side lean?