Android Headunit

This tekken file is it NES rom or some other platform .In classicboy each game platform has its own rom folder.I put it in nes rom folder and it says wrong file format when i try running a game.

 

@JoshuaA I installed it from the link you posted on mine. My menus are different than yours

 

Yep factory amp, talk to @Pudge or tec 12 for best options.

 

PlayStation ROM. Tekken3 folder should be a cue file and 3 bin files. Point to the first bin file to start game.

Make sure you didn’t download a malware file, that would be a single file.

I tried to link directly to the game. If you go to the main Tekken3 page, the game is located when you click “Alternative Download”, which is the address I provided in the link above.

 

Which menus? ClassicBoy I downloaded directly on the Android HU. The Tekken3 files are described in the above post, or I can dropbox the game if you guys are having a hard time getting it.

 

The settings menu, I downloaded it directly onto mine from the link you posted. Not tekken. I'll take a couple pics tomorrow after work show you, it doesn't look anything like your settings menu

 

The settings pics are from ClassicBoy and I don’t think I linked CB here. Ya, post pics, I’ll see what I can do.

 

thanks Yeah i have 3 files in the folder.Ill put it in playstation rom .

 

I completely agree. Seems they like to go with bargain bin components. But I'd be willing to spend more if it meant getting better components and guts. I can't wait to see what the Gen3 looks like and what upgrades it will have.

 

Looks like these are shipped out now as they’re made, with delay times. I imagine it’s generic, then they have to add the proper harnesses for different brand trucks and lots of people are buying them.

Somewhere in there, software is tested and tweaked. I would stick with Phoenix/Trinity (same company) as they finesse them the best for Tundras.

 

Is this the adapter that you guys used to get the factory USB/AUX port to work? I just want the usb cable to work. https://www.crutchfield.com/S-LOCjifrsP3m/p_120TOYUSB/Metra-AX-TOYUSB-USB-Port-Cable.html

 

Is this what you’re asking? To use the oem aux connector. There are 2 sets of male and 2 sets of female rca's that say aux. One set of the male ends plugs into one set of the female ends. You can tell which by looking to see which ones go to the white connector of the headunit that is plugged into the oem wiring. The ones that go to one of the 2 left over (disconnected white) connectors don't do anything.

 

Nah that’s not it I’m trying to get the stock USB cable to work.

 

There should be a plug that came with the unit that has a square plug on one side and a USB plug on the other. The USB side plugs into the Male plug on the unit and the square plug goes to the truck wire harness.

 

Ah. I see. I installed a different android head unit. I didn't realize the Tesla style came with that plug.

 

That cable looks similar. I haven't looked into your type of unit. But I would give it a try, you could return it if it doesn't work.

 

I have the JBL system with the taco tunes amp and dsp. It had the plug and play kit for the JBL amp. I can't get this Android unit to sound good with the taco tunes kit. It's got a slightly static/clipping sound on higher pitches cymbal noises in the music I listen to. I have adjusted the CUR even though I don't know where to set it when you have an external amp. Is it 20, 30, 45, what is the proper setting? I've adjusted the sensitivity, HPF, LPF, and even my DSPs gain and output and I can't get it to that sound to go away. I was never thrilled with the taco tunes kit anyway so I might ditch it. I was looking at getting a Kenwood Excelon XR600-6DSP since it's an amp and a DSP in once that can be integrated into the trucks "brain".

 

Installed the Phoenix HU in my 2016 Platinum CM today. Latest gen with buttons, fast boot. Got the sound and the air conditioning problems worked out. By switching to Hi and adjusting the Cur. Problem I'm having that i havent seen mentioned on the forum...The screen brightness is very low. Like it's always stuck in night mode. The headlights on or off don't change it. The dimmer setting is set all the way bright for day and night. But in the daytime the screen is verrrrrry dim. I cant find any settings to fix this. Any ideas?

 

Make sure bit depth is 8, not 6

 

Yessssssss... .. Just changed it to 8 and it worked. Appreciate it fellas

 

Next question. Wiring in a front cam. (The Amazon one that fits in Toyota logo on grill) I dont have a FRAC harness, so what wire coming off the Android HU is a good power wire to splice into?

There is a purple wire off the front camera harness on the back of the radio labeled "Reversing Power Supply". Tried that, didn't work.

Front camera yellow RCA is hooked to the Video Output 1 on the harness thats above the back up camera harness.

Back end of RCA cable up by the grill has the red wire from camera, and red wire on RCA connection spliced together, and grounded to engine bay bolt.

 

Disregard.....got it. Purple wire worked for power. Video was hooked into the wrong one. The one labeled Output 2 was the front camera on the HU. Up and running now

 

Which brand Amazon camera? NOAUKA? If so, be careful with its yellow male port, the tip broke off on mine, it does not mate properly into the Android HU’s. Put it together until it gives you a signal and tape it, don’t force it further. The company sent me another one. Normally I would solder a new video male, but the camera’s has a red power wire coming from it too.

 

Yessir....Exact same scenario happened to me. Tip broke, but was able to mate them. Was actually researching how to add a male tip with power wire an hour ago. Haha. Luckily it wedged back together properly and mated.

 

Where can I purchase one of these?

 

https://www.trinityautosolution.com...screen-navi-radio-for-toyota-tundra-2014-2018
Add to cart, go to checkout, Discount Code is JMTUNDRA71



I highly recommend joining the FB group. Install instructions/videos, tips, crowd sourced problem-solving. The unit comes with no instructions and can be frustrating without help. Once you have it setup, it's good. And if you want to use your factory GPS instead of their wire, you need these:

$29 Maestro Acc-SAT-TO2 Sat Radio and GPS Antenna adaptors for TO2 Vehicles

https://www.amazon.com/dp/B01K03PORU

$8 DGZZI 2-Pack RF Coaxial Adapter SMA to SMB Coax Jack Connector SMA Male to SMB Male

https://www.amazon.com/dp/B06Y631SY1

According to Jodi who runs the FB group (also a member here), he says they are making them to keep up with demand. I'm guessing delivery may take a month, ymmv

 

Saw a video on this. Haven’t seen/heard of anyone doing it yet though?
http://www.beatsonicusa.com/cs6ep.html

 

I think that's for a stock HU. On Android HU, at least the Tesla style one, you can connect a $13 camera into the existing harness via video port and power wire. Use the HU's digital "Camera" button and choose between rear/front camera views even while driving.

https://www.tundras.com/threads/android-headunit.16037/page-81#post-1111118

 

Changed the background image tonight to match my white platinum. Doesn't have to be a solid background behind the truck like I kept reading. Just make sure it's 740 by 313 ish. Save the file on a flash drive as ZXWLOGO.png Insert in truck. Copy from flash drive to main internal SD folder via the folders tab up top. Save and reboot. Viola!!!!

 

New fix!