1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

AMP Power Step LED replacements ?

Discussion in 'Lighting' started by geno0506, Apr 7, 2019.

  1. Apr 7, 2019 at 3:15 PM
    #1
    geno0506

    geno0506 [OP] New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,725
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
    I am thinking of replacing my OEM step lights with these!

    https://www.amazon.com/gp/product/B01ABPGAUC/ref=ox_sc_act_title_4?smid=A1QYAP1MVBSMHK&psc=1

    Do I just cut the wires on the oem led step lights at the base of the light and then splice that wire in with the new rock light wires!

    Screen Shot 2018-02-27 at 10.08.31 PM.jpg Screen Shot 2018-02-27 at 10.09.31 PM.jpg

    Any tips or better LED's please advise and thanks for input!

    I had placed this in another thread but its taking off already, sorry for double post, ADMIN!
     
    Last edited: Apr 7, 2019
  2. Apr 7, 2019 at 4:01 PM
    #2
    r1-superstar

    r1-superstar Kailua Boy

    Joined:
    Jun 20, 2018
    Member:
    #16296
    Messages:
    1,159
    First Name:
    DB
    UTAH
    Vehicle:
    2018 TUNDRA CM SR5 TRD SPORT 4x4 MGM
    That should work just fine. I will be changing mine out soon too. Growing tired of the light blue LEDs the kit came with.
     
    geno0506 [OP] likes this.
  3. Apr 7, 2019 at 4:18 PM
    #3
    NewImprovedRon

    NewImprovedRon Hey! Get off my grass!

    Joined:
    Jul 8, 2015
    Member:
    #1501
    Messages:
    13,218
    Gender:
    Male
    First Name:
    Ron
    Bentonville, AR
    Vehicle:
    2015 Radiant Red TSS Doublecab 4X4 Off Road
    Deck rail system, Bed divider, door sill protectors, LED reverse light bars, Aries Bull Bar with 28" 180 watt LED light bar, LED step lights, LED bed lights, driver-side grab handle, TRD Rear Sway Bar, BedRug bed mat and tailgate mat, Morimoto Fog Lights, more to come.....
    I would suggest placing some shrink tubing over the wire connections to make them waterproof.
     
    geno0506 [OP] likes this.
  4. Apr 7, 2019 at 4:21 PM
    #4
    geno0506

    geno0506 [OP] New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,725
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
    thanks I have a bunch of them!
     
  5. Apr 7, 2019 at 4:39 PM
    #5
    geno0506

    geno0506 [OP] New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,725
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
  6. Apr 7, 2019 at 4:53 PM
    #6
    joeguam

    joeguam New Member

    Joined:
    Oct 2, 2016
    Member:
    #4744
    Messages:
    239
    Gender:
    Male
    First Name:
    JOE
    Vehicle:
    2015 Toyota Tundra SR5
    Pro Comp 6 Inch Stage II Lift Kit with Icon 2.5 coil overs and piggyback rear shocks, SPC Upper Control Arms, Atlas 6” Leaf Springs, Coach Builder Steering kit, Coach Builder +3 Shackles, BDS Recoil Traction Bars, Amp Research steps, Fuel Nutz two piece 20x12-44 offset wrapped with 38” Toyo MT tires, LineX Bed Liner, Viper 5706V Alarm and Remote Start, Pioneer 4200, JLAudio Amps, JL Audio Subs. Nitro Gear 5.29 and Auburn LSD
    You can get the heat shrink at Home Depot, Ace Hardware or Lowes. You can get the shrink tube in pieces or buy a set for future use.

    black-eclipse-tools-electrical-tubing-902-355-64_1000.jpg
     
    geno0506 [OP] likes this.
  7. Apr 7, 2019 at 4:56 PM
    #7
    geno0506

    geno0506 [OP] New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,725
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160

    cool I have a box I got from Amazon last time, I just need the pink heat shrink connectors to connect red and black wires from battery side and new LED light side!

    Screen Shot 2018-02-27 at 10.09.31 PM.jpg
     
  8. Apr 7, 2019 at 5:01 PM
    #8
    joeguam

    joeguam New Member

    Joined:
    Oct 2, 2016
    Member:
    #4744
    Messages:
    239
    Gender:
    Male
    First Name:
    JOE
    Vehicle:
    2015 Toyota Tundra SR5
    Pro Comp 6 Inch Stage II Lift Kit with Icon 2.5 coil overs and piggyback rear shocks, SPC Upper Control Arms, Atlas 6” Leaf Springs, Coach Builder Steering kit, Coach Builder +3 Shackles, BDS Recoil Traction Bars, Amp Research steps, Fuel Nutz two piece 20x12-44 offset wrapped with 38” Toyo MT tires, LineX Bed Liner, Viper 5706V Alarm and Remote Start, Pioneer 4200, JLAudio Amps, JL Audio Subs. Nitro Gear 5.29 and Auburn LSD
    so the terminals?Home Depot, Lowes or Ace Hardware in the electrical aisle
    gardner-bender-wire-connectors-wire-terminals-gbx-tk-64_1000.jpg
     
    NewImprovedRon and geno0506 [OP] like this.
  9. Apr 7, 2019 at 5:10 PM
    #9
    geno0506

    geno0506 [OP] New Member

    Joined:
    May 25, 2016
    Member:
    #3446
    Messages:
    4,725
    Gender:
    Male
    First Name:
    Michael
    Vehicle:
    2017 Tundra 5.7 CM 4x4, S/W, B-6112/5160
    thanks a lot, I'll go get a few! :thumbsup:
     
    NewImprovedRon likes this.
To Top