Almaboy's Build

Looking good. Thought you said you had no money LOL! Mods keep coming fast and furious.

 

Then you should be ripped from lifting and moving all those boxes

 

6/18/17

Upgraded my HID output on my SPYDERS

H11-35 HID conversion kit for H11 Halogen bulbs
Ballast wattage: 35 Watt

 

6/18/17

And then went up to North London Mine, just before Mosquito Pass....and shot guns. Snow was still 20' deep in spots that prohibited further travel

 

Report back on your focals please

 

6/18/17
Full sized spare fits underneath now. It only took a little "shaving" off the guides to fit flush. It's tucked up next to the hitch but the hitch is a tad lower for tire protection...I hope

 

SUPER DOPE!!
By far the best sounding setup I've ever had in a vehicle. I'm not sure I even need the subs with the focals. They are expensive but sound like headphones when cranked up. I can crank all the way up with max bass with no distortion AT ALL.

 

Right on!! that's gonna be one of my final mods

 

You will not be disappointed. I've had JL, POLK, ROCKFORD, and ALPINE. None of them compared to the sound that is coming out of the Focals. Now, it might have a little to do with my processor too but nonetheless....they are badass. You'll dig em

 

Really nice looking truck! I had to build a quick spreadsheet to see what I had spent. Once I did I was able to put the brakes on, lol. Same thing with my AR. When I saw I had over 6K in that weapon I was able to quit.
Still, it is rewarding to see a result for money spent. Not like going to the casino!

 

I'm hoping Im at a "slowing point." The major mods are complete. I still need a new leaf pack but them I'm done with high dollar stuff for a while. I like where it is now but there are a few odds and ends when I recover from the hefty stuff. The credit card companies are loving me and my interest right now!

 

Have you had any issues with the 35" spare in that location? Rubbing?

 

Man I love the mountains..looks great up there @Almaboy

 

I said "full sized"spare. What I meant by that is a 305. I went a little smaller than 35 and will stay smaller on my next set, but to answer your question..no. no rubbing anything significantly. At least not that I know of. Went wheeling today and took a quick look but didn't inspect much.

 

Cool. Good to know. I'm trying to figure out the largest diameter size tire I can fit in the stock location. I've seen 315s (I think) and that was too close for comfort. This looks a little too tight for my liking and what my truck will be going through. Baja roads are rougher than offroad trails in the states sometimes.

 

I'll pull it out when I'm wheeling hard.

I live in the high Rockies so I'm not sure how much harder the trails are than here or MOAB but I certainly would not want my spare subjected to some of the stuff I've seen recently. I would find another location for tough days

 

@joonbug
While you're out having fun I'm at home "workin" on modifications

 

You spent all weekend riding atv's and spent like 5 minutes on your spare tire!!!

 

7/2/17
Painted my rear pipe and tip

 

7/2/17
Installed my bullring hitch receiver

 

7/2/17
Installed bed LED'S from @mattgecko to copy @Krezz
Anyone interested in bed lighting...these are BRIGHT, and a fantastic mod if you have a tonneau, do a lot of camping, need night access to your bed, or just want something to show off to others. Everyone i've shown so far is blown away. I'm way more impressed in person than photos I've seen of others on here. It was an easy install and relatively inexpensive

 

Bout an hour and a half. Hardest part was trying to find the closest sized drill bit when I couldnt find my 15/32 to make the hole for the bed located switch

 

@joonbug you need some of these. I've camped under my tonneau before and need light. This could've been your campsight rather than your cot under the stars

 

Been gone for the Canada Day Weekend - but it was my first time camping without a bed light system. I was already in chat with @mattgecko about a new set, and after NOT having the lights, I can tell you, I definitely could have used them. You don't notice just how much use they are until they are gone.
So that being said, a new set will be ordered up as I had planned too anyway, but now doubly confirmed!

 

7/6/2017
Installed my protos from @KB Voodoo
Voodoo Fabrications designed a very versatile rail system that will eventually carry my Voodoo basket and bike mount

 

Very nifty Mark. Please do a follow up with pics.

 

https://www.tundras.com/threads/kb-voodoo-bed-crossbar-design-check-it-out.13756/page-4#post-288651

The install was so easy i didn't have time to snap photos of the process. It literally only took 10 minutes...maybe an hour for an unskilled guy like you

 

Thanks for that Mark. Give me a break..I could do it...in a day with my gkids helping out.

 

That'll be you and I Joon in the Mojave with my Shackles.. I'll bring a jack