3rd Gen Accessory Thread

Is that Windchill pearl ? How much do you want, I will have you hook up mine. lol!

 

Sure is WCP! Got them from Painted OEM Parts. Shipped from CO to NY in 1 week and they look incredible. I had thought about wrap, painting the original ones etc, but so glad I went this route. Shouldn't be too hard to swap out. Keeping the existing grille and will paint the emblem with Duplicolor dark shadow chrome. I'll post pics when the project is complete

 

Haven’t seen it posted yet but RCI just released a whole bunch of good stuff. Sliders, LCA skids, fuel tank skid, rear diff skid.
https://rcimetalworks.com/product-category/toyota/tundra/2022-2023-tundra/

 

How much did they cost?

 

I saw a Tundra today that had intermittent turn signals, both front and back. It’s was stopped at a red light as I drove through. Looking at the grille, it was either a Limited or maybe even a SR5. The grille looked black, where the Limited are gray. Certainly wasn’t a Platinum, 1794, or PRO. I didn’t realize intermittent came on lower trim? Or can you had to existing lights ?

 

$990 for all 4 pieces which included tax and shipping. I added the TBL raised letter inserts afterwards. Thought that was fair and I'll probably put the originals up for sale eventually, as they'll be brand new.

 

You should PPF them prior to installing. Protect your investment!

 

The limited has a premium package that includes this , If they have the TRD Off road package as well it will have the black TRD off Road grill instead of the limited grill. Not sure if its option for Sr5. As far as adding I believe yes you can just swap out non sequential lights and they will work.

 

Would these mess with the trd skid plate? I'm guessing yes but hope I'm wrong.

 

I don't think I've posted here before, but check out the link in my signature. I run and enthusiast-owned small business out of my garage. I am putting together a Tundra specific now, but to outfit a Tundra you would want two pairs of Bed Tie Downs and two pairs of Rail Tie Downs. Available in red, black, blue and silver.

 

Any discount for the Tundra Forum members

 

They look nice!

 

if you looked at the attachment from ryan under general applicability

 

my bad for me the post only showed the part number and cat shield so I asked there weren't any pictures or attachments but now that i refreshed it I can see it but thanks for the info

 

But of course! Use code TW2022 for 5% off.

Also if you order 2 items or more I cover the shipping!

 

Even to Canada??

 

OEM-style dual charging action…

iPhones 14 Pro Max and 12 Pro Max

(working prototype)

 

When will you have the blue back in stock?

 

How? Part? Where to get?

 

I post updates more frequently to our thread here:

https://www.tundras.com/threads/qi-charger-solution-dual-charger-in-prototype-form.115096/

The single charger for qi-equipped Tundras and the retrofit version for non-Qi-equipped trucks is already out and on sale at https://www.europeanenterprisesfirm.com/

 

This is awesome! Can't wait to see you get it finished up!

 

This is inspirational thank you @Tundra-G ! I am also running my TRD OR tires with 286/65/20 TRD OR (heavy, load E). Great traction but have also noted changes you describe. The 20” TRD wheels are great and I love them, but the look isn’t quite just right, for me. It has a more “luxury truck” vibe rather than OR BA

May I ask how you decided between R17 and R18 for your wheel diameter? What are pros and cons between them? Thanks! Excited for the arrival of your KING suspension; with your new wheels and lighter tires that’s going to be an unreal setup.

 

I just got this SR5 TRD off road premium yesterday. It has the TRD skid plate and TRD wheels already. I'm planning on getting the AFE tow hooks, a cat plate, running boards, and a tonneau cover. I was thinking about the MX4 but now after the recall I'm not sure.

 

Form me, the wheel diameter was simple, 17s. I wanted 35” tires, but did not want the weight. At this stage there is only 1 tire that fits the profile, Goodyear Territory M/T 315/70R17. These are stock Bronco Sasquatch tires.

They may not be the best all terrain 35s out there, but they are on average 12-17 lbs lighter per tire than anything else out there.

I really do not need E-rated tires since I don’t haul weight or tow too much. The ride improvement is huge, really substantial going from E-rated Coopers to C-rated Goodyears.

 

Should be 2-3 weeks. I’m making them now.

 

I wish I could…. I will honor the cost of free USA shipping cost by sending a refund for the difference once you place your order. Canada shipping is $28 vs $8.

 

Have to get a pic on here but put my retractable hard aluminum tonneau cover with rack on. Looking to dechrome but still trying to figure out if I have to recalibrate if I remove and reinstall with the plug/play parts all over this truck.

 

as far as sensors are concerned, removal/reinstall of the same item shouldnt affect operation of the item. only if you adjust modify the suspension height do you have an issue.

only device i think may have an issue with removal/install is the camera on the top windshield regardless of suspension adjustment.

 

Thanks Nodak67
I have seen multiple videos on how to remove Mustache and rear bumper tailgate handle and have asked and all have said because plug and play should not need recalibration not changing the specs just removing the part so I can change color and replace exact same part.

 

I put four of these d-ring tie downs on the back four mounting bolts for the bed. With the wider frame size on the gen 3 these are far enough apart to fit a 4x8 sheet of plywood. It is about 49" to the outside of the d-rings. I use a piece of 2x4 that is 4' to protect the plywood and give downward pressure. I was planning on doing the two front bolts. However, I realized that for some reason they put these two in closer by one of the groves of the bed. So these will not clear a sheet of plywood. It is unfortunate because these two would have been a good strapping point if you use a bed extender and a long 12' board. If you buy the d-ring with the 1/2" hole you do not need to drill them out. Below is the link to the d-rings that I bought.

$20 BUSY-CORNER Tie Down Anchors for Trailer, Warehouse, Boat, 10 PCS of Heavy Duty Steel V Ring Bolts, Pickups Truck Accessories(Black)

https://www.amazon.com/gp/product/B0B5D8K8WF?smid=A3RRLPFXB910N5&th=1