3rd Gen Accessory Thread

Don't encourage Skynet. lol

 

Anyone find an aftermarket kit to create a flat floor in the back seat?
Piss poor design.
Would like to figure this out before entertaining the idea of purchasing a new Tundra.

 

Overlandaddict makes a rear seat delete kit, but I haven’t seen a great aftermarket kit that leaves the seats in place. There’s a post somewhere in the forums about some DIY options.

 

After a year of running stock TRD OR wheels with Cooper LT275/65R20 tires, decided to go all out.

First, coopers are awesome, not my first cooper set. However, these tires are heavy; significant hit on mpg, power and ride quality. For me, the latter two were major problems.

I decided to go for larger tires, but lighter. Specially, went for Wrangler Territory 315/70R17, which are 9lbs lighter than coopers, wrapped around Methods (MR305 17x8.5 +25mm offset). Total wheel tire package is now about 18-20 lbs lighter per wheel, which is a lot.

wow, ride quality is awesome now, will have to wait to give an opinion on power and mpg..

In 2 months, my King suspension is coming, so front will get 1.2 inch lift.

ps: truck has stock height and suspension. The rear axle has about 400lbs load, my old tires and wheels. Hence it does look relatively level.

 

Shawnee Hills Workshop makes one. They offer a kit for both the 60 & 40 sides for CMs and DCs.

https://www.shawneehillsworkshop.com/

 

I’m excited for this one . Great price and super light . Quality feels amazing

 

Rough Country 1.75 up front. I did the same with my 17 4Runner. gives it the right stance without going up too much.

 

S&B work with hybrid?

 

Anyone able to point me to directions on installing the TRD running boards (PT767-34221) for the double cab? I see a lot of people say its super easy, just very particular in making sure I'm doing it correctly. Much appreciated!

 

Not really an accessory but finally got rid of the chrome surrounding using plastidip.

 

Been awhile since I posted here:

added the iKamper X-Cover 2.0 a couple weeks ago.

Also the new EEF Qi charger has been working perfectly.

 

Finally got rid of the rear chrome bumper caps. Used vinyl, heat and some patience. It’s not a perfect color match but really really close. I’ll take better pictures when I wash it, which will also give a better comparison.
I also added mats inside by Smartliner. They’re just like the big name folks just priced better. I’ve seen lots of people talking about WeatherTech, Husky and Rough Country. Check out Smart Liners.

 

Nice. I'm going to pull the bumper caps to cut & in-lay some flush mounts lights back there. I've been toying around with testing my vinyl skills on those caps. I kept thinking those pieces wouldn't be too bad to attempt a DIY wrap job since they're close to square and flat. lol. They seem like good pieces to practice on.

 

That’s exactly what I want to do but I wanted to see how I’d do wrapping them. The edges and corners sucked and it took some time get shaped and stretched right without having fingers. My first attempt a year ago went horribly wrong but I did way better this time. I really like having less chrome! The Hogan mustache I’m on the fence of deleting. Only because it breaks up the big grille and I like the blue I have on the TRD and Tundra

 

that was my first ever wrap job, all sorts of angles, text inlay, air pocket openings

it was not that hard at all, just time and patience, the bumper covers shud be a walk through the park - even if its your first job ever

 

Question regarding Retrax PRO MX - is there a way to upgrade to have the channels like the XR that support rack accessories? Or other aftermarket options/suggestions. With the box housing unit dropping into the bed and 5.5 bed really limits space in the bed. I did add the bed extender for weekend projects. But thinking summer travels may need more space.

 

I figured it out - on the Retrax sight I found they sell rail kits. Little expensive, just over $300.
Now I need to find a rack. Looking for something slim - sleek, ideally telescoping or folding if there is such a thing. Planning for bikes and storage box for traveling.

Any suggestions greatly appreciate.

 

I painted mine midnight black. Was pretty happy with it. I polished a bit more since this picture. Looks pretty good now. Was pretty easy too.

 

Thule adjustable racks Truck and van rack systems | Thule | United States

 

It literally is just 8 body bolts. Should take 30 minutes tops if you don’t have a power screwdriver.

just eyeball the bolts based on the mounting locations when you hold the board up to body. These aren’t over-engineered BMWs or Audis here. Lol

 

Thanks, I appreciate it!

 

I installed them by myself in a parking lot, in the rain, in under 10 minutes- super easy with a power drill

 

The only thing i can find on their website is for the last gen Tundra.

 

Any torque specs I should be aware of with them?

 

See attached for the installation guide.

 

Surely this also covers the 2022's, right?

 

Nice , Sign me up for the Dual charger pre order when available.

 

Ready to switch out the grille surround and front upper bumper cover. Now I just need the truck to get here already!

 

Keep following our thread. We will post updates as they become available. But the EEF Universal Charger replacement for Qi-enabled trucks is already on sale and shipping along with the Charger with insert so people can retrofit a charger into their non-Qi-enabled trucks.

THREAD: https://www.tundras.com/threads/qi-charger-solution-dual-charger-in-prototype-form.115096/

As for an update on the dual charger, it just hit prototype form and is in testing phase now.

 

Been there.