3rd Gen Accessory Thread

can you post a link to that?

 

https://parts.toyota.com/p/Toyota_2...-Support-Bed-Step/114926318/PTS3034000BK.html

… but that looks like the mounting bracket only. Not the complete assembly. As the same part number without the ‘bk’ at the end looks like the whole assembly. $150 for the bracket. $325 for the complete assembly.

 

PTS3034000BK and PTS3034000ST are the 2 parts to make the bed step or PTS3034000 as complete bed step.

My local dealer has PTS3034000 as $260 once I selected it and then the dealer on toyota.com

https://parts.toyota.com/productSea...key_make=5775&ukey_model=89462&modelYear=2022

 

I went with another Undercover Elite one piece cover. I hope your new cover works out well. According to all the dealers I talked to about covers, and my experience with Toyota’s tri-fold), they all leak. Please let us know if you have any leak issues. If none, I’m sure plenty of those will be sold. Nice cover.

 

My understanding is that Toyota has a lift kit up to 4” without having camera/sensor issues. Specifically for the 2022 Tundras.

 

Do the Elevate TS rails block the use of the OEM rails mounted on the inside of the bed? I can’t seem to get a clear answer on this.

 

3” on that Toyota OEM lift

 

Would anyone be interested in a full set of unopened OEM carpeted mats? Mine came with them, but purchased all weather mats before leaving the dealership. Forgot I even had them until I put something under the back seat and found them.

 

Got mine delivered today. Only took 3 weeks.
How long did the install take you?

 

Damn. Wish they were shipping the full bumpers that quickly.

Edit: 1 hour after I post this comment, I get notification from CBI that my full bumper has shipped. Should be here next week. Super stoked. Ordered on 6/15 with an ETA of 8/29.

 

I opted to pick up at freight facility. Quicker that way if you can do the same. Just make sure your bed is empty. I thought I could take everything off the pallet but it comes in sections that are all bolted to the pallet.

 

So PTS3034000 includes the step and all the mounting bracket stuff needed for install? TIA!

 

Yeah. I thought about that. Spoke to the local freight terminal, but they said it wouldn't be available for pickup until Monday anyways since their local terminal isn't open to the public on Saturdays or Sundays. I figured I'd just let them bring it to me in that case. I can WFH that day so it's no big deal for me.

As for the bed...carrying around loads like this is exactly why I opted for the 6.5' bed. hehe.

 

If you're not in a super rush, Amp Research (which makes the Toyota OEM step I believe) sells the entire step for $290.00. Part # AMP75329-01A. Customer service there said they're replenishing stock in mid-September with their retailers.

https://www.amp-research.com/product-detail/AMP75329-01A/bedstep-flp-dwn-bmpr-stp-22-toyota-tundra

I think Toyota has it broken into 2 part numbers because the actual step portion is the same between the manual and power versions. However, the bracket is different between the two.

 

I just installed the Toyota bed step from the parts listed. This video helped me quite a bit, I did have to remove the chassis bracket described in order to fit the step mounting bracket. My step (footplate) components came pre-installed so the install was easier. I’m very happy with the step and its deployment. Previously I had an order in for the aftermarket bedstep, waited a month and no delivery so I cancelled that and went with BAM.

 

Also installed the Toyota dashcam. Video here was instrumental in giving me the confidence to do it myself. Install was straightforward and I’m also really happy with this part.

 

Installed the TRD skidplate over the Talon Cat Shield. They work and look great together. There is a hook on the TRD skid that must be removed to fit over the Talon. Cut it off with bolt cutters and dremeled flat + smooth

 

Can anyone share the OEM part number, or an aftermarket link to the heritage badge spelling TOYOTA that goes on the passenger side dash “carbon fiber” above the glove box? My Limited TRD Off-road has no Toyota or TRD badging on the passenger side to put decals in, so I’m seeking the raised TRD Pro letters- thanks!

 

Used this to mount a Furrion monitor. Really happy with the way it turned out!

 

I take it you had to remove the deck rail system to get the Elevate ts rails to fit?

 

Absolutely agree. My Taco had the Husky mats and I thought they were actually better than Weather Tech; however, I’m going to compare both before deciding.

 

The Toyota TRD skid plate is relatively easy to install. Here’s mine.

 

I have the deployable spoiler on the front
of my 22 Limited. I’d love to put a good quality decal that says “TOYOTA” or “TUNDRA” on it. If anyone sees one or a source, I’d appreciate a heads up. Thanks.

 

Was thinking something similar... But something like "MOVE OVER" or "KEEP RIGHT" printed in reverse so legible when viewed in a rearview mirror.

 

GoRhino Dominator D6s today...

 

Looks good. They don’t hang down either. Nice work

 

Thanks! If you actually take your time and adjust the mounting hardware appropriately they fit high and tight nicely.

 

I Wanted to add the black exhaust tip. Any discounts out there on that?

PT932-34221-02

 

Diode dynamics fog lights (DD5022P) $108 dollars off for a total of $132.
Not sure why these specific ones are more than the DD 15% off sale on this site but I grabbed a set.

https://www.quadratec.com/p/diode-d...led-flood-light/single-row-white-beam-dd5022p