2020 Sequoia TRD Pro Grill conversion

I don't have a Sequoia yet however getting close to pulling the trigger. Only problem is I want a MGM platinum with Redrock interior. Not too many out there in that combo.

 

No there isn’t. I wanted cloth interior and that was bad enough. The red rock interior is my favorite though.
There is a complete interior on eBay right now.
Grill part #
PT363-0C200-GY
And
53111-0C240-B1
Hood bulge

 

Just ordered one for my 2008 Tundra. I got -BL for the grille and -C0 for the bulge so both are black. They are saying they are back-ordered and he will let me know ETA tomorrow. I also believe for 07-09 you need parts #53118-0C030 and 53117-0C030.

Anyone want to buy a brand new Black Line-X'd Rock Warrior Grille I was just getting ready to install???

 

Has anyone tried this on a 2016 blizzard pearl platinum?

 

Not a 2016 but a 2019 Blizzard Pearl Platinum
https://www.tundras.com/threads/mrs-machine’s-2019-platinum-blizzard-pearl-sequoia.56512/

 

So to clarify, I currently have a 2012 Tundra Platinum and the chrome is an eyesore to me. I've ordered the Sequoia headlights and everything needed to make it work. But the grille is my next purchase.

This grille will fit but have a small gap at the bottom if I continue to run my current Tundra bumper?

 

Yes from what I've heard. Have yet to see a tundra picture with conversion and alleged gap documented anywhere...

 

I haven't either so I don't think anyone has done it yet. Toyota Dealer said 30 day backorder. I hate waiting! If the gap is obnoxious I will just add black weatherstrip or molding to the bottom to close it up a bit.

On a different note, just dropped my Tundra at SDHQ for an Icon suspension install. Super stoked!!!!

 

Please post pictures when its done. I'm interested in the gap as well.

 

Which piece are they referring to here? I know it's #11, but does this clip onto the grille and go on the end of the hood? I'm trying to order the grille and trim and wasn't sure what I needed to get.

Molding - Toyota (53111-0C240-C0)

 

Anyone know if you can keep you’re headlight washer when swapping to the 3rd gen sequoia headlights?

 

I believe someone posted a video and some pictures somewhere on here of them using their headlight washers. It took a little bit of work but came out great. Search it up, you should find results.

 

Hey fellas. I was just able to complete the install of the grille. It was back ordered through sparks as of last week, placed an order dec 1st and last week they said they couldn’t even give me an estimated eta. Apparently they only made a few extras before production of the 2020 pro sequoias, they called the main US warehouse for this info. Thanks to JBtaco I also got an order in with my local dealership before all of this and somehow they ended up with one.
This is what it looks like on a tundra with the gap, not bad after some weather stripping underneath, I measured and its just a smidge over 1in.
You can use the old clips from your grill if you take it off carefully, but its super straight forward bolt on for the tundras.

 

Just when you though the headlights were the thing. That completely transforms the gen 2 front end... Gen 2++

That small space below is hardly noticeable.

 

Looks good to me! Actually looks perfect lol I have found my new purchase... tonight. Thanks for posting pictures, it looks so much better.

 

Thanks! Yeah I think this is the best option for a tundra grille, we 2nd gens got real lucky on the sequoia parts. This is the

$13 Etopars 157" 4M P Shape Car Door Trim Edge Moulding Rubber Weatherstrip Seal Strip Auto

link for the weather stripping, came with plenty for refreshing it in the future if necessary.

 

Love it, this is the first image of the gap I've even seen and it's negligible. Seems a perfect spot for a KITT Knight Rider light bar

 

looks great

 

IMO the gap is a great trade off for the killer look! Your truck looks 10 years newer now. Great job.

 

Looks awesome! So you can’t just unbolt the sequoia trd pro grille from the grille surround and swap it with the our oem toyota emblem grille? Similar to how you would install a db customs grille or an enve grille? If not then going to a body shop and having to color match the grille surround sounds tedious

 

The middle section is actually attached to the black sides of it so its not as plug and play like those grilles, if you're comfortable cutting a brand new grille then it could possibly be done.
And the grilles come painted from the factory when you order them, they only have the colors that the TRD PRO Sequoias come in though.

 

Damn what a bummer! If I ever decide to blow nearly $400 to perform surgery and cut the grille out from the surround to replace mine, I’ll definitely post it up

 

That looks amazing. Super excited for mine to show up now.

 

Now this has me thinking the gap would be a non-issue with this bumper style...

 

Definitely.

 

That gap would drive my OCD into overdrive. I think the best option would be to retrofit it into the tundra frame. Are the interior dimensions the same?

 

Who makes that bumper?

 

addicted off road. It's pretty spendy... and heavy. Still on the fence on whether or not I want the added weight and expense.

 

Thanks dude,looks awesome ,I’m guessing around 2k smh

 

Look what just showed up!!! I'm super stoked. Now some skilled, enterprising young person needs to make a gap kit for this to fill in the bottom. Just based on my measurements I am guessing it is about a half to 3/4 inch short from the Tundra Grille. I have the Rock Warrior Grille I never put on and was comparing them side by side. It will be a week or 3 before I get it installed because I am in the middle of painting my Tundra Desert Camo and intend to paint the surround on this Flat Black.