2018 Sequoia LED Headlight Harness For 2nd Gen Tundras

Xrunnerdude67 was a man of his word and fully refunded my money. Thank you!

 

I would like a refund as well!

 

I just sent him a message and request for refund on PayPal and he refunded within 15mins.

 

Well, after dragging my feet for 5 months and transporting these lights around through a move, I have finally installed them and can't express how happy I am... bright AF, yes, but I used to get flashed the high beams on my stockies and I would flash back to square them away..... Eitherway, Thanks for putting in the work to make it happen....


edit: mind the LED refresh rate, they're on...

 

Awesome!! Looks great.

 

Can anyone confirm the correct part numbers for the Sequoia TRD Pro headlights? I believe they are 81150-0C160 and 81110-0C200?

Also what part numbers are the fillers underneath?

Thanks

 

Those are the correct numbers for the SR5/Limited/TRD Sport/TRD Pro Headlamps
The panel numbers are:
53931-0C904
53932-0C904

 

Thank you.

 

When I look those parts up they do say all years Sequoia but then they look like Tundra. But they definitely seem to be the right ones.

 

Theyre not going to redraw them... part number mainly matters though..

 

Where does the gray wire going under the steering wheel? I'm having a hard time finding where that goes. Can anyone attach a broader picture where that wire harness is and then a closer picture showing which wire to cut?

The pdf instructions are blurry and I don't want to mess this up

 

I will be honest, I struggled with this too... if you removed the battery, take the J-hooks and push them through the inside of the cabin and push them out... they will breach toward the right side of the brake booster when you're looking from the front of the truck. I used both to sneak it through... took some time, yes... once you drop the under panel you will need to count the pin out..
I can post some pics in a little bit... kick panel may take a day or so... since I go in to work in a little bit..

 

Hope this helps
first one, just above the ebrake.. you will have to engage it for clearance

 

Thanks for the pics, do you have pics of how and where you connected the gray wire to

I was able to get it through that area into the cab, but not sure if I hooked it up correctly. My DRL are not working

 

clip it to end that goes to the plug... I dont have my tools with me right now.. but in an hour or 2 ill post one.

 

OK, I tried to get a better picture, but it will require me unplugging the harness.... I took a picture of what it looks like and its not really going to help much... I took 2 screenshots of the instructions and the gray wire you will be clipping..... I'lit is the 2nd harness and grey wire from the top.. mine looks like a hornets nest, but will post them

 

Further more, my front clips to the lower headlights were gone since I bought this truck, and when I removed my old trim the clips fell apart... anyway if it helps someone on here down the line I'll post the part numbers and ocular pleasure..

 

I needed those parts. Thank you.

 

Anyone have a picture or know where the ignition fuse goes? #26? My harness didn’t come with any instructions. Guess I had that coming.

 

He does send it via PM... to your inbox when you order it.. Maybe check your convo

 

ok. Yeah never got one. Anyway someone can forward it to me? Everything was plug and play as far as the plugs. Lights all work etc. I just have the red wire with a fuse and the grey wire that are not connected to anything. Do I even need them to be? Do notice my DRL are not amber and I have factory amber DRLs. Thank you.

 

Got everything other than the grey wire and red wire with the fuse slots. DRLs are not amber. Truck no longer starts. Can someone send me a picture of where the red wire goes?

 

Plugged it into #26. Everything works. Amber DRL during the day and or in parking light position. When lights turn on ambers go away and are white! Nice harness Mike.

 

Here goes.

 

Yes. Thank you. Exactly what I did.

 

Question. When you run your lights on the auto position, do just the amber inners light up? That’s how mine work. I only get the outer white ring and amber inner if I click it to parking lights. I have factory DRLs and didn’t do the gray wire mod.

 

Anyone? Checked all my wiring and it’s all good.

 

It all depends on the options that you requested when you ordered your harness.

I thought that you cancelled and requested then received a refund on your order?

 

I did. Ordered through XKOR website that buys the harness from Mike. Felt more secure.

 

Ahh! That seems reasonable. What options did you request though? For example, I requested stock behavior for mine. DRL (auto position/off) is a bright white full surround, parking and/or headlamps on are a muted white full surround, signals/hazards are amber.