1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

14-16 Custom Modified Front Bumper $ 125.00 ---SOLD---

Discussion in '3rd Gen Tundra Marketplace (2014+)' started by CM-LENNY, Aug 30, 2016.

Thread Status:
Not open for further replies.
  1. Aug 30, 2016 at 5:28 PM
    #1
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    I have an OEM front bumper from my 2015 4x4 CM. I have modified the end caps for greater tire and ground clearance. The end caps were welded up by a custom hot-rod body shop here in San Diego. Everything in the photo is included with the bumper ( less the truck ). The front plastic was also cut up for more ground clearance. I made a custom aluminum skid for more clearance, but that does not convey with the bumper. It has been a while, and cant remember if the factory sheetmetal skid will work. I do some sand dune running and had some problems hitting my front end, so I modified the factory bumper, then went on to build my own pre-runner bumper. You will need to trim some of the inner plastic fender to blend in, but that's what being creative is all about. The end caps need to be finished off with re-chrome or color match to your truck. The photos are not the greatest, as I through the bumper back on for the ad pics. This is a one-of-a-kind bumper that needs to be finished off and installed. Local p-up in San Diego,CA only. $500. I have invested DSCN3108.jpg DSCN3109.jpg DSCN3110.jpg DSCN3112.jpg DSCN3114.jpg more than that just in body-shop work. Check e-bay to see what you can get for your bumper, and you may be ahead of the game. Thanks for your interest, John
     
  2. Aug 30, 2016 at 8:05 PM
    #2
    16tunterd

    16tunterd New Member

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    392
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    ADS C/O w/clickers, Camburg UCA,Fox 2.5 w/dsc rear, Toytech shackles, chrome delete, Pro grille, TRD dual exhaust, de-badged, black LED tail lights. BHLM w/projectors, 295 70 18 Cooper STT pro on stock rims w/1.25" Spider Tracks. Morimoto fogs.
    I like it, thanks for giving me some ideas!
     
  3. Aug 30, 2016 at 9:45 PM
    #3
    matluth

    matluth Fish On!

    Joined:
    Apr 20, 2014
    Member:
    #378
    Messages:
    6,489
    Gender:
    Male
    First Name:
    Matt
    Aurora CO
    Vehicle:
    2007 Slate Metallic 5.7L Tundra DC SR5 4X4
    18"X9" FN BFD's rims, 295/70R/18E Cooper Discoverer STT Pro's, upgraded to Old Man EMU coil-overs/shocks. Toytec shackles Next: true dual exhaust, new UCA's.
    Very cool. One of a kind is pretty nifty, $500 for a custom bumper trim?? Looks nice. [​IMG]

    Stock bumper................
     
    Last edited: Aug 30, 2016
    aramirez73, Backslider and CaptTyler like this.
  4. Aug 31, 2016 at 3:01 PM
    #4
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Thanks for the reply. Anything one of a kind can look simple on the outside, but has a lot more work not seen. Believe it or not there are a lot of man hours into this mod. Everything behind the face of the bumper has been trimmed in one way or another. The welding and grinding on the end caps alone is very extensive. I appreciate any and all comments and am willing to be open to any offers on the customized bumper. I have had it sitting around for over 6 months and want it gone. I have the OEM skid plate that you can have to. I just joined the forum last night and really enjoy all the stories, pics and articles. Thanks much............
     
    matluth likes this.
  5. Sep 1, 2016 at 2:59 PM
    #5
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    PRICE DROP............$ 400.00 / OFFER. Need it gone ASAP. Thanks
     
  6. Sep 2, 2016 at 4:03 PM
    #6
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    PRICE DROP AGAIN............ $ 300.00 ? Whats it worth ? Any thoughts ? Open to offers...............Thanks
     
  7. Sep 2, 2016 at 4:56 PM
    #7
    16tunterd

    16tunterd New Member

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    392
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    ADS C/O w/clickers, Camburg UCA,Fox 2.5 w/dsc rear, Toytech shackles, chrome delete, Pro grille, TRD dual exhaust, de-badged, black LED tail lights. BHLM w/projectors, 295 70 18 Cooper STT pro on stock rims w/1.25" Spider Tracks. Morimoto fogs.
    You're not planning a trip to the Santa Cruz area are you?
     
  8. Sep 2, 2016 at 6:18 PM
    #8
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Sorry.....I'm not. Would be glad to bring it your way if You were closer. Thanks anyways........
     
  9. Sep 9, 2016 at 4:50 PM
    #9
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Any thoughts on the value of this thing or is it simply the fact I am on the West coast and have local pick-up only ? Just open for any thoughts. I live in a condo with a small garage and have this stored at mt work. Boss kinda wants it gone. Hate to have it tossed in the dumpster. Any offers ? Thanks much...............
     
  10. Sep 9, 2016 at 5:43 PM
    #10
    Law323

    Law323 Pray for peace, prepare for war

    Joined:
    Apr 7, 2016
    Member:
    #3081
    Messages:
    2,458
    Gender:
    Male
    First Name:
    Law
    Tennessee
    Vehicle:
    2012 4.6 L MGM DC
    3" Rough Country Level lift (front) 1" Toytec block (rear) 275/70r18 Toyo AT2 Info system mod 3D MAXpider Kagu floor mats LED interior lights 50% ceramic tint front windows 35% ceramic tint windshield brow Bed mounted YETI bottle opener Paracord wrapped oh Sh!t bars 3" stubby antennae Upcoming: LED backup lights/cargo lights OEM Backup camera Raceline Raptor? 18x9 wheels ICI magnum step bars TRD sway bar Toytec BOSS 3" suspension lift Trifold or roll up tonneau cover Tow mirrors????
    I'd take advantage of this if I had a 3rd gen!
     
  11. Sep 9, 2016 at 8:08 PM
    #11
    joonbug

    joonbug mmmm.....bacon...

    Joined:
    Oct 13, 2015
    Member:
    #1948
    Messages:
    1,498
    Gender:
    Male
    First Name:
    Joon
    Dublin CA
    Vehicle:
    2015 Tundra DC 5.7 TRD off-road
    Might help to post pics a little further away.
     
  12. Sep 20, 2016 at 3:57 PM
    #12
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    ANYONE INTERESTED ??? $200.00 and it's yours. Need it gone ASAP. Thanks......
     
  13. Sep 20, 2016 at 4:23 PM
    #13
    SuperSilverTundra

    SuperSilverTundra New Member

    Joined:
    Jul 1, 2016
    Member:
    #3735
    Messages:
    601
    Gender:
    Male
    First Name:
    Nick
    Los Angeles California
    Vehicle:
    16 TUNDRA 5.7 PLATINUM-PRO
    3"/1" Lift TOYTEC 18x9 XD818 Heist 295/70r18 TOYO MT DirtyDeeds BAMuffler Spyder Leds KatzKin Leather S&B CAI
    im interested what actually has to be done to the bumper? I see you mentioned it need to be finished off and installed is it end caps only or the whole bumper?
     
  14. Sep 20, 2016 at 4:34 PM
    #14
    SuperSilverTundra

    SuperSilverTundra New Member

    Joined:
    Jul 1, 2016
    Member:
    #3735
    Messages:
    601
    Gender:
    Male
    First Name:
    Nick
    Los Angeles California
    Vehicle:
    16 TUNDRA 5.7 PLATINUM-PRO
    3"/1" Lift TOYTEC 18x9 XD818 Heist 295/70r18 TOYO MT DirtyDeeds BAMuffler Spyder Leds KatzKin Leather S&B CAI
    im in Los Angeles maybe we can meet up or at least the shipping should be a lot less
     
  15. Sep 20, 2016 at 4:40 PM
    #15
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    It is the whole bumper. Everything shown in the lower picture of the original post. All the pieces behind the facia have been trimmed in one way or another and the end caps will not bolt directly to an oem structure without the mods I have done. The bumper will bolt directly to your frame, no mo The finishing off part will be the re-chrome or paint, some mods to your lower inner fender (plastic) pieces, and possible custom skid plate. The picture shows just a gray primer sprayed on the bare metal and welds. Just so you know, I paid $500 for the welding and fab work to the end caps. Yahhhhhh........ we have all been down the road of blowing some money, then changing are mind 6 months down the road. Let me know...............Thanks
     
  16. Oct 19, 2016 at 5:11 PM
    #16
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    PRICE DROP to $ 125.00 / OFFER. Need it gone !
     
  17. Oct 19, 2016 at 7:56 PM
    #17
    16tunterd

    16tunterd New Member

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    392
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    ADS C/O w/clickers, Camburg UCA,Fox 2.5 w/dsc rear, Toytech shackles, chrome delete, Pro grille, TRD dual exhaust, de-badged, black LED tail lights. BHLM w/projectors, 295 70 18 Cooper STT pro on stock rims w/1.25" Spider Tracks. Morimoto fogs.
    I'll be down your way in 3 weeks. I'll buy it then if you've still got it.
     
  18. Oct 20, 2016 at 6:42 PM
    #18
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Sounds good 16tunterd. Keep me posted. Where you coming from ?
     
  19. Oct 20, 2016 at 6:45 PM
    #19
    16tunterd

    16tunterd New Member

    Joined:
    Jun 7, 2016
    Member:
    #3549
    Messages:
    392
    Gender:
    Male
    First Name:
    Warren
    Santa Cruz
    Vehicle:
    '16 CM limited
    ADS C/O w/clickers, Camburg UCA,Fox 2.5 w/dsc rear, Toytech shackles, chrome delete, Pro grille, TRD dual exhaust, de-badged, black LED tail lights. BHLM w/projectors, 295 70 18 Cooper STT pro on stock rims w/1.25" Spider Tracks. Morimoto fogs.
    Santa Cruz. My daughters have a competition in Costa Mesa. We'll be there the 11th -13th.
     
  20. Oct 21, 2016 at 11:43 AM
    #20
    Sixpack

    Sixpack New Member

    Joined:
    Aug 9, 2016
    Member:
    #4148
    Messages:
    200
    Gender:
    Male
    First Name:
    John
    Central Florida
    Vehicle:
    2014 Silver Sky Tundra CM TRD 4x4 Limited
    Moto Metal 951 18x9 rims, ESP lockable under seat storage, Husky mats front and rear, ReadyLift 3/1, Undercover Flex trifold bed cover, Bed Rug, interior LED's, 15% tint all around, TRD CAI, Bully Dog Platinum GT tuner, TRD rear sway bar, much more to come...
    If I didn't live in Fla. that would be on my truck right now. You did a great job fabbing those end caps. GOOD JOB!!!
     
  21. Oct 23, 2016 at 5:41 PM
    #21
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Thanks John/sixpack. I had the bumper on just a short while and had some great compliments. I went another route and built prerunner bumpers front and rear, but think someone with a little time to finish this bumper off will have a great end product and one-of-a-kind. Thanks for the comments.
     
    Sixpack likes this.
  22. Oct 28, 2016 at 12:11 PM
    #22
    AnonVet

    AnonVet New Member

    Joined:
    Sep 2, 2016
    Member:
    #4410
    Messages:
    273
    Gender:
    Male
    First Name:
    Dan
    Canyon Country
    Vehicle:
    2015 Tundra SR5 CM Lifted and Leveled
    3in Level, Bilstein Shocks, 33x18x9.5 M/T's, murdered out and debadged, LED's all around, and some other stuff I can't think of
    interested, I'm in santa clarita. When could we meet for a check-out and pick-up?
     
  23. Oct 31, 2016 at 3:49 PM
    #23
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Hey Dan got your PM. Keep me posted if you are still interested. Thanks........
     
  24. Oct 31, 2016 at 5:17 PM
    #24
    AnonVet

    AnonVet New Member

    Joined:
    Sep 2, 2016
    Member:
    #4410
    Messages:
    273
    Gender:
    Male
    First Name:
    Dan
    Canyon Country
    Vehicle:
    2015 Tundra SR5 CM Lifted and Leveled
    3in Level, Bilstein Shocks, 33x18x9.5 M/T's, murdered out and debadged, LED's all around, and some other stuff I can't think of
    Ya bud I am. sorry I lost track of time this weekend. how does a pick up on Saturday sound? if a time during the week changes, I can cruise out then?
     
  25. Oct 31, 2016 at 6:17 PM
    #25
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    Sounds good Dan...........Saturday works better than anything. Keep me posted.
     
    AnonVet likes this.
  26. Oct 31, 2016 at 9:05 PM
    #26
    AnonVet

    AnonVet New Member

    Joined:
    Sep 2, 2016
    Member:
    #4410
    Messages:
    273
    Gender:
    Male
    First Name:
    Dan
    Canyon Country
    Vehicle:
    2015 Tundra SR5 CM Lifted and Leveled
    3in Level, Bilstein Shocks, 33x18x9.5 M/T's, murdered out and debadged, LED's all around, and some other stuff I can't think of
    Saturday is it then. I'll give ya a call thursdsy with the time if that's ok. we can meet at your work or anywhere in the Santee/ Tierresanta area if that works for you. you mentioned the skid plate also, is that still with the bumper? figure I can fab from it possibly. Just some bored Saturday work. Thanks again and talk soon.
     
    Sixpack likes this.
  27. Nov 1, 2016 at 5:36 PM
    #27
    Sixpack

    Sixpack New Member

    Joined:
    Aug 9, 2016
    Member:
    #4148
    Messages:
    200
    Gender:
    Male
    First Name:
    John
    Central Florida
    Vehicle:
    2014 Silver Sky Tundra CM TRD 4x4 Limited
    Moto Metal 951 18x9 rims, ESP lockable under seat storage, Husky mats front and rear, ReadyLift 3/1, Undercover Flex trifold bed cover, Bed Rug, interior LED's, 15% tint all around, TRD CAI, Bully Dog Platinum GT tuner, TRD rear sway bar, much more to come...
    If we were closer that bumper would have been on my truck, lol...
     
  28. Nov 1, 2016 at 8:35 PM
    #28
    AnonVet

    AnonVet New Member

    Joined:
    Sep 2, 2016
    Member:
    #4410
    Messages:
    273
    Gender:
    Male
    First Name:
    Dan
    Canyon Country
    Vehicle:
    2015 Tundra SR5 CM Lifted and Leveled
    3in Level, Bilstein Shocks, 33x18x9.5 M/T's, murdered out and debadged, LED's all around, and some other stuff I can't think of
    Haha. It'll be color matched and on mine by Monday
     
    darkknight2014 and Sixpack like this.
  29. Nov 6, 2016 at 9:29 AM
    #29
    CM-LENNY

    CM-LENNY [OP] New Member

    Joined:
    Aug 30, 2016
    Member:
    #4379
    Messages:
    158
    Gender:
    Male
    San Diego, CA
    Vehicle:
    2015 4x4 CrewMax SR5
    Front 5100's. , 285/75R-18 Nitto G2's 4:88 diffs
    ----------SOLD--------
     
    darkknight2014 likes this.
  30. Nov 6, 2016 at 10:10 AM
    #30
    AnonVet

    AnonVet New Member

    Joined:
    Sep 2, 2016
    Member:
    #4410
    Messages:
    273
    Gender:
    Male
    First Name:
    Dan
    Canyon Country
    Vehicle:
    2015 Tundra SR5 CM Lifted and Leveled
    3in Level, Bilstein Shocks, 33x18x9.5 M/T's, murdered out and debadged, LED's all around, and some other stuff I can't think of
    I'll shoot ya some pics when I have it all complete. After football i'll be living in my garage., Thanks again bud!
     
    CM-LENNY and darkknight2014 like this.
Thread Status:
Not open for further replies.
To Top