1.5 inch spacers for 20 inch wheels to give the proper offset for Superlift 6 inch lift

I have a 2023 Tundra TRD Off-Road with the factory 20 inch wheels. Factory offset is +55. I have a 6 inch Superlift kit sitting on the back porch just waiting to be installed, but the kit requires an offset of +18 to +20, which I have learned is necessary due to a bracket that is part of the lift kit actually hitting the wheel.

A 1.5 inch wheel spacers SHOULD give me nearly the exact numbers I need to be able to use those factory 20 inch TRD wheels, which I absolutely LOVE, by the way.

Has anyone else installed the 6 inch Superlift kit #1026 on their Tundra and ran this setup successfully? I'm not sure if it is pertinent information, but I also plan on running Nitto Ridge Grapplers that are 37x12.50 inches on the factory wheels. Nitto says that 20x8 wheels is acceptable for that tire. I am also aware that a little trimming is necessary for a 37 inch tire, even with a 6 inch lift. I am not against an even wider spacer, say 2.0 inches, but that would place me firmly out of the recommended offset range of +18 to +20. I don't know if it is OK to go even further with the offset or not. 2 inch spacers would give me an offset of around +4.

If anyone sees a flaw in my planned setup, especially the wheel spacers, please feel free to chime in. Thanks in advance!

 

This should be helpful

 

The setup I mentioned above worked perfectly and the truck is on the OEM 20 inch TRD wheels, 6 inch Superlift kit, Nitto Ridge Grapplers and 1.5 inch spacers. This thing turned a head or two bone stock, but everyone who likes trucks comments now! I couldn't be happier with the results!

 

Go get it dirty, and for everyone’s sake no more pictures in mall parking lots… even if that is the natural habitat for most lifted trucks.

 

That photo was 5 minutes after I got the truck back from the lift. I was in Bojangles parking lot. A man has to eat!

 

Man, it’s been a minute since I’ve been to a Bojangles. Now I want some chicken an biscuits…

Truck looks awesome! Glad it worked out.