09 for a 2014

- bought a 2014 double cab 4x4 a month ago
- bought some used factory 2009 tundra rims, thinking for some winter tires
- at the time didn't realize the center bore is different by .5mm
- without trying, does anyone know if the older 110mm center bore rims will fit on the 110.5mm 2014?
- should I just try to sell them and go to a good all season on the existing rim?
- sorry for the bullet form but my paragraph typing can get lost in a hurry

 

I have a 2010 and bought a set of rims/tires from a 2016. I haven't noticed any issues and they been on for about 20k. Even got the tpms sensors reprogrammed.

 

- pretty sure 2016 are 110.5mm
- 2010 would be at 110mm so the 2016 will fit over the hub in your case your lugs will center the rim
- I'm looking opposite of what you did, if the 110mm is an actual measurement.. .sometimes measuements arent exact(thats what im hopeing)
- will the 110mm (09)factory rim fit over the 110.5mm hub(14)?
- I did just read an interesting post on hub and lug centric though

 

Huh, I thought they were interchangeable?

 

The center bore is the size of the hole in the wheel. The truck hub hasn’t changed to my knowledge. 2007-present are interchangeable. .5mm is so small it wouldn’t matter anyway.

 

My thoughts exactly!

 

Did you physically try to mount them on the truck?

 

Thank for the replies.
I was on the web site wheel-size.com...if you click on 2014 then 2009 you will see a center bore difference. The gen.3 size is 110.5mm and the 1st and 2cd are listed at 110mm. This is why I was asking the question, later down the road if I decide to go aftermarket, which size would be correct, 110 /110.5mm?

 

No...thought I'd ask first, they still have old 275 18's on them.

 

You are correct about the size difference beginning in 2014, the hub bore is .5mm larger. That being said the difference is negligible. We’re talking about half a millimeter. Tundra wheels are not a press fit, especially to those tolerances. 2007-present wheels are interchangeable.

 

Give it a try with one wheel and you'll see what @jc153 is talking about.

 

Makes perfect sense,for some reason, (in my head)I was thinking 5mm difference not .5mm
Thanks again

 

Had a leak around one of my tpms sensors so decided to put one of the 09 rims on.

Black rims would differently change the look of the truck.
One a side note,dont think the 2 ton jack I have in the shed will cut it for this truck.

 

Yeah I have a 3 ton jack I’m just about need an extension to get it up high enough. I’m hoping to find a lifted pedestal for my jack or getting a bigger one.

I like the 09 rims on it BTW!

 

With this 09 "spare" my tpms light didn't come on. I didn't think or it doesn't look like the 09s have the sensors, so is it just going off the 3 sensors on the original wheels?