Fox coilovers and strut spacer

I am wanting to get fox 2.0 coilovers but I can't find any for an 8.5 inch lift, has anybody put a 6 inch strut spacer on top of the 2.0 coilover?

 

WELCOME

 

Thanks!

 

2.0 shocks are way too small for a truck this size. Minimum should be 2.5.

It really kind of depends on the amount of money you want to spend. You can find a full coilover that is built for your lift, or you can go the less expensive route and simply use the supplied spacer on the factory strut ( assuming your current lift kit came with one)

 

Fox makes a coilover for the BDS 7" lift, and I know for sure it can be cranked to 8" (might be able to crank it to 8.5") or you could leave it at 7" and run a small spacer on it.

 

So should I get the bilstein 6112's?

 

No

 

Go with the BDS 7” kit. Crank it up and roll.

 

I have fox 2.5s with RR on my BDS 7 inch. No spacer needed