What have you done to your 2.5 gen Tundra today?

$749 plus tax installed.

 

Did a few upgrades this morning, wiring is currently a mess need to get my switchpro installed and everything properly wired still.

The @sdhq_offroad brackets finally installed. I had the rago fab set and they were ok - gotta say these are significantly more beast and the fit is slightly better. The rago slightly touched/warped the cowl. The SDHQ clear the cowl on both sides. They have an added "bump stop" that contacts the hood, we will see how that helps offroad and in the washboards.

I had the Rigid DSS in driving, trying something different - not entirely sure yet how it'll work. Not long ago installed my 40" behind the grill; figure this will tackle lighting the distance. I have the driving in the fogs which helps in mid distance so I decided to pop on some D-XLs in a driving diffused pattern. Plan is to offset the projection a touch more to the side for more coverage.

Blah blah

Night shots will be taken later.

 

Where did you buy the storage compartment from?

 

I'm guessing you just needed a bmc to get the 35s on stock wheels? Do u have any spacer or shims/shackle on ur pro? Just wondering if I can do what I want with the 35s and spacer on stock wheels with just a body mount chop? Tia

 

Do you have a link for the top picture tray to purchase? Also, does it drop right in...no trimming, etc? I have 2019 Crew.

 

Maybe this was already posted but how do you guys get the chrome and grey plastic interior pieces off without breaking anything?

 

Which pieces? The cup holder bezel just pops off. The shifter surround has a couple pieces held together with screws and plastic welds after you pop the whole cover off.
There are a lot of other chrome and silver pieces inside the truck though.

 

The part around the head unit is all one piece, looks worse than it is but easy with a pry tool, might as well do the rings while you have it out:





Center console:

 

Filled her up for the first time with 91 octane in preparation for the dap tune!

 

Fits right in.

MX Auto Accessories - Center...

$30 MX Auto Accessories - Center Console Organizer Compatible with The Toyota Tundra & Sequoia (2013-2021) - Made in The USA. Years (07-13) Organizer Will not fit Flush to Front Edge of Console as Shown.

https://www.amazon.com/dp/B076MGDCVV?ref=yo_pop_ma_swf

 

ESP Truck accessories

 

Ordered these handle overlays the other day. These things are complete garbage. Don’t ever order them!

 

Let me start off by saying whoever said money can't buy happiness is full of shit. I don't have a ton of pics for proof but I gotta say my truck is a life saver to me, I FN love it.
1st off the gen y hitch, my log splitter use to bounce around like crazy every bump, I had to pull over to check if it was still there. Getting stuff out the back with the bedslide is awesome. Chainsaws, recovery gear, gas cans ect, all easily accessed standing at tailgate. Security of all that stuff, the Diamondback HD. I ran into 2 issues today that I thanked my lucky stars I had purchased it. Splitting some monster rounds that were frozen stuck in the ground was a breeze. I would've been Fd without the platinum xeon winch. Effortlessly it pulled the big rounds out the frozen ground right over to my splitter. Being able to just stand 50 ft in front of my truck and with the remote engage and disengage the clutch wirelessly is amazing. I had to pull at least 10-15 monsters without the winch even breaking a sweat. Then it got dark. The baja designs lights in the front and rear allowed me to just continue as if it was still daylight. I gotta say I'm in love with this truck and the setup. It got me out of a whole bunch of pinches today and for that I'm grateful.

Happy Turkey day everyone. Only pic I took bc I was busy trying to get my firewood done for next year or if I run out this year. But I swear it all happened just as I said it did. The truck saved my ass not to mention my back many times today. Please excuse how dirty it is, it was hard at work today and will be back at it tomorrow.

 

Did you have wheel spacers? Or are they the stock wheels with the 35's?

 

Hey Bri, I already asked him same. 1.25 spidertrax is what he has, same as me. From what it looks like I'll be able to throw 35x12.5r18 on my ride and not even need a bmc. I have all the same as his setup, minus the CB bumper shims.

 

I like the width, but I don't like spacers.

 

Whhhaaaa lol

 

What she said

 

I will have to find some wheels with a +25 offset after my Ridge Grapplers are done.

 

This is my first post after getting my 2015 - 1794 Sky it is my first Tundra and I have to say I will not drive another truck other then a Tundra. I can see this is going to be a expensive hobby

My first thing I did was install the Telsa style head unit in the truck and I really like it most of the issues have been address in the Gen2 with the latest updates. I mainly use Apple CarPlay with the unit.



Then I order my under seat storage from ESP with the discount code provide from tundras.com.



Completely Installed


Next up I think will be a Diamondback cover.

Scott

 

The forum is better with pictures and I promise they will come.. I ordered Bilsteins 6112 and 5160 with a set of Spidertrax 1.25" spacers. Still trying to figure out the wheel/tire setup.

Tomorrow I have a group of buddies meeting me to install my AMP Research power steps, bed light, and pop n' lock.

Pictures to come and I hope you all had a great holiday!

 

Had it washed and detailed inside and out, clay bar and waxed. A week in Baja takes its toll especially when it's windy.

 

Good week for the old girl. @dirtydeeds 8” installed and @SCSPerformance finally put on. Went with the Duratracs OTD for $808 275/70/18

 

Thanks man, super happy with it

 

Nice Upgrade - Looks Great
What do you think of the dirtydeeds 8”?

 

Thanks!
I really like it. Quiet enough to not piss off he neighbors, but wakes up when you throttle it.

 

installed total chaos bed stiffeners

 

Yesterday I add another source for the ride. ✌️

 

Making some progress on my @sdhq_offroad shifter surround, the @Caliraisedled panel is bigger than the switch pros. Had to trim a bit, but it looks sufficient. Now to rewire.

 

I agree 100%.
Crappy rainy and raw right now. Sunny tomorrow makes it tempting to clean the truck up but it’s supposed to rain again on Monday.