What have you done to your 2nd gen Tundra today?

Thank you! Yeah it definitely took a lot of time. I just did a piece here and there. I also wrapped the door handles and side mirrors to get rid of the chrome.

 

Wicked man!

 

I don't have the package but I purchased at local Ace Hardware. It is made for liquid and electrical fires for automobile use. If I get there soon I will take a pic of the package.

 

I usually have junk in the bed so I got one of these cheapy tonneau cover to get me by until I find a shell. It's actually pretty nice for the price.

Tyger Auto TG-BC1T9039 Roll up Truck...

$207 Tyger Auto T1 Soft Roll-up Truck Bed Tonneau Cover Compatible with 2007-2013 Toyota Tundra | 6.5' (79") Bed | TG-BC1T9039

https://www.amazon.com/dp/B01LYYJIYF?ref=yo_pop_ma_swf

 

I took mine to a Volcano...
https://www.instagram.com/p/BnOvfh6n4KP

That I then drove to the top of...
https://www.instagram.com/p/BnOzp59n9-H

Then I drove it to Pikes Peak... Which it summited.
https://www.instagram.com/p/BnRXrGmnH28
https://www.instagram.com/p/BnRX8kRnhVV

GPS data on my APRS transmitter.
https://www.instagram.com/p/BnRgi7SHdim/

 

Slowly but surely getting the accessory wiring cleaned up and looking good.

 

- wheelers off road superbumps installed
- relocated full size spare tire back to its original place. drilled out brackets underneath bed to clear the 295/70/18. I got my bed space back yeah !

 

Went to some family land on Saturday to sight in my gun, was beautiful so had to take a pic. Also, added a custom shift knob. Made it from some old beams that were taken from my grandparent's old barn that was taken down 10 years ago. Same wood I made a table out of a couple of years ago. Got the shape I wanted and started some varnish. Then drilled and cut the top off to set the nut in, reglued and added more varnish. Finished with some matte paint to dull it a bit. I am quite pleased with the result! All for $0 and about 2 hours of actual work. And a lot of waiting for the varnish to dry. Cheers!

 

Awesome shifter handle

 

Mounted a fire extinguisher in the bed.

 

Love it!!!! Really wish I had bought a floor shift truck instead, I'd love to give it one of those 60's Mopar pistol grip shifters.

 

Nice. I have a slightly smaller extinguisher that I stuck in the driver's side rear door cupholder. Fits perfectly.

 

Thats a quick grab spot!

 

How did you prep your calipers before spray painting? Is there a color code for the red you chose?

 

I scrubbed them with acetone and a brush then taped everything off and used VHT caliper paint the color was real red.

 

Let’s see a shot with wheels back on and whole truck

 

Looks awesome. I really like your truck

 

Thanks!

 

clean truck !

 

Installed small inverter in the useless pocket by the DC ports. Got the bed lined after patching all my rust holes in the bed. Painted the last foot ish of the exhaust high temp black.

 

Installed my new White Knuckle sliders

 

How did you wire outlet looking to do same thing

 

Info info info lol that looks sweet. What setup is that

 

Popped and locked.

 

Quite a bit of stuff in the whole setup. SwitchPros SP9100 back near the master cylinder and terminates to the block on the right side of the fuse panel cover. Left side is Blue Sea bus bar. KnuKonceptz positive and negative battery terminals. Braided lines used to cover everything I could, terminals soldered and heat-shrinked. I also have a label maker with special labels made for wiring. I ran 6 lines (the ones you see in red next to the terminal block) into the cab and connected to a terminal under the dash. This will make it easier to connect any accessories inside or out, to the switchpros unit. I also have a Blue Sea fuse block under the dash for things that I don't want to connect to the switchpro, like radar detector, etc. I wrapped a metal plate with carbon fiber vinyl and secured it to the fuse cover, then used some sealant to fill in all of the holes created from previous owners. Still got a little ways to go, here is a pic of the switchpros panel which is expensive af but absolutely amazing! I thought installing it in the useless business card holder would be pretty sweet.

 

@Alexstundra l it's a small 150watt inverter mounted with two bolts. The wiring is simple just extend leads and I tapped into the right side DC outlet. Negative is on the outside and positive on the inside.

 

i have a friend who hates the rake of my truck and has been bugging me to install leveling spacers. instead i installed a 3300lb engine in the back. tadaaa....level

 

3300 lbs?!

 

Anyone install town mirrors and keep bsm? Anyway could install a small bulb on inside of door where mirror is. ?